beicuxhaven
Ehrenmitglied
- 10.436
Da der Dev nun vom Siyah Abstand genommen hat und auf CM umgestiegen ist, wird der Support meinerseits hier b.a.w. eingestellt. Siehe dazu auch https://www.android-hilfe.de/forum/...rivers-closed.404048-page-9.html#post-6033948
Der Kernel arbeitet ausschließlich mit CM 10.1 (4.2.2) mit den neuen Mali V2 Treibern
Der "Erbauer" ist Gustavo_s
Hierbei handelt es sich um KEINEN offiziellen Siyah Kernel von GM (alias Gokhanmoral )!
Der Kernel arbeitet ausschließlich mit CM 10.1 (4.2.2) mit den neuen Mali V2 Treibern
Der "Erbauer" ist Gustavo_s
Hierbei handelt es sich um KEINEN offiziellen Siyah Kernel von GM (alias Gokhanmoral )!
15/5
Add boostpulse's powerhal to initramfs, remove skia because it was no…
Add a better interface for wifi_pm that keeps settings after a reboot
Add backup/restore option to stweaks
Fix backup scripts, check if there is backup available on boot, if ye…
13/5
Add pegasusq's boostpulse configurations
08/05
- Slimbean boot fixed, tested on a clean installation of slimbean 5 official
- Reboot bug fixed
- Mali touch boost
- Wifi power management in stweaks
- Logger on/off in stweaks working
27/04
Revert to linux 3.0.31 and use new initramfs forked from original siyah kernel
25/04
kleines Update des Chargers in StWeaks und als default skia disabled...
24-04 Neue sstweaks ettings vom mcm Kernel
22/04 gentle fair sleepers disabled - kein Freeze mehr...
21/04 Above patch for freezes
- Gpu step 267mhz was running with 950mv even with 1000mv set (1025000 was being interpreted as 950000 for some reason), now its with 1000mv as it should
- Gpu step 100mhz now runs with 900mv
- 17/04 Remove boospulse and use pegasusq's freq_for_responsiveness instead, new cpu voltage table to try to fix freezes reported by some users (picked from dorimanx)
- 17/04 Fix stweaks reseting settings on every reboot
- 15/04 Add cpu_uv tab back as users requested, add arch_power and cfs tweaks to stweaks, add sched_mc in stweaks. Add powerhal from mcm, add boostpulse on/off in stweaks
- 14/04 Add gpu control tab in stweaks (now working), remove cpu_uv tab because of too many freezes
- 13/04 Fix wi-fi toggle, increase cpu 500mhz step voltage by +25mv hopefully will fix the random freezes, add frandom module (thanks to kijodoari for linking me to this)
- 11/04 Add boostpulse to pegasusq governor with sysfs interface, 4-step gpu
-100mhz
-160mhz
-200mhz
-267mhz
- 08/04 Agressive gpu tresholds to jump from 100mhz to 160mhz when there is UI interaction for better performance then clock down to 100mhz when screen is off for battery saving, added cpu_uv tab back, compiled with latest linaro toolchain
- 07/04 v2 Removed gpu control tab in stweaks because it does not work with new drivers, default freq/voltage are the same as cm stock kernel
07.04.13 16 steps cpu, pegasusq tweaks
06.04.13 Fixed recovery and RIL
Add boostpulse's powerhal to initramfs, remove skia because it was no…
Add a better interface for wifi_pm that keeps settings after a reboot
Add backup/restore option to stweaks
Fix backup scripts, check if there is backup available on boot, if ye…
13/5
Add pegasusq's boostpulse configurations
08/05
- Slimbean boot fixed, tested on a clean installation of slimbean 5 official
- Reboot bug fixed
- Mali touch boost
- Wifi power management in stweaks
- Logger on/off in stweaks working
27/04
Revert to linux 3.0.31 and use new initramfs forked from original siyah kernel
25/04
kleines Update des Chargers in StWeaks und als default skia disabled...
24-04 Neue sstweaks ettings vom mcm Kernel
22/04 gentle fair sleepers disabled - kein Freeze mehr...
21/04 Above patch for freezes
- Gpu step 267mhz was running with 950mv even with 1000mv set (1025000 was being interpreted as 950000 for some reason), now its with 1000mv as it should
- Gpu step 100mhz now runs with 900mv
- 17/04 Remove boospulse and use pegasusq's freq_for_responsiveness instead, new cpu voltage table to try to fix freezes reported by some users (picked from dorimanx)
- 17/04 Fix stweaks reseting settings on every reboot
- 15/04 Add cpu_uv tab back as users requested, add arch_power and cfs tweaks to stweaks, add sched_mc in stweaks. Add powerhal from mcm, add boostpulse on/off in stweaks
- 14/04 Add gpu control tab in stweaks (now working), remove cpu_uv tab because of too many freezes
- 13/04 Fix wi-fi toggle, increase cpu 500mhz step voltage by +25mv hopefully will fix the random freezes, add frandom module (thanks to kijodoari for linking me to this)
- 11/04 Add boostpulse to pegasusq governor with sysfs interface, 4-step gpu
-100mhz
-160mhz
-200mhz
-267mhz
- 08/04 Agressive gpu tresholds to jump from 100mhz to 160mhz when there is UI interaction for better performance then clock down to 100mhz when screen is off for battery saving, added cpu_uv tab back, compiled with latest linaro toolchain
- 07/04 v2 Removed gpu control tab in stweaks because it does not work with new drivers, default freq/voltage are the same as cm stock kernel
07.04.13 16 steps cpu, pegasusq tweaks
06.04.13 Fixed recovery and RIL
gokhanmoral, codeworkx and all CM team for their wonderful work
Tungstwenty for helping me a lot
Dorimanx for recovery sources
Orithread XDA: [KERNEL][CM10.1][06/04] Siyah v6.0b5 with Maliv2/r3p1 video drivers - xda-developers
Tungstwenty for helping me a lot
Dorimanx for recovery sources
Orithread XDA: [KERNEL][CM10.1][06/04] Siyah v6.0b5 with Maliv2/r3p1 video drivers - xda-developers
Anhänge
Zuletzt bearbeitet:
Ich bin mir schon sicher, dass einige Devs noch eine gute Zeit lang CR dafür entwickeln. Ist ja auch gerade dann sinnvoll (und aus Entwicklersicht reizvoll), wenn der Hersteller den offiziellen Support einstellt.