Android 4.1.1 rom auf 4D Version.

[baer.elektro]

Ich habe mit dem ROM slidepad704cet-memup-jb411-cwm6012v2
Android 4.1.1, Kernel 3.0.8+, Display, Sound, W-Lan am Laufen.
Fehlt nur unser sitronix_ts. Wie bringe ich dem Breeze bei, die sitronix_ts Treiber zu benutzen?

lsmod
8188eu 686814 0 - Live 0x00000000
dmard06 11388 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 33868 0 - Live 0x00000000
gt2005 36911 0 - Live 0x00000000
gc0308 16888 1 - Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 114487 8 - Live 0x00000000
ump 34362 19 mali, Live 0x00000000
gslx680 241408 0 - Live 0x00000000
pixcir_cxx 23546 0 - Live 0x00000000
byd693x_ts 9094 0 - Live 0x00000000
zet622x 19182 0 - Live 0x00000000
ssd253x_ts 22661 0 - Live 0x00000000
inet_ctp 2227 5 gslx680,pixcir_cxx,byd693x_ts,zet622x,ssd253x_ts, Live 0x000000

 

[TheSSJ]

Wenn du weisst welche Datei hier der Touchscreen Treiber ist, kannst du diese laden mit

insmod Touchscreentreiber.ko

Wenn es das war, was du wissen wolltest natürlich ^^

 

[baer.elektro]

vendor/modules/sitronix_ts.ko
/system/vendor/modules/sitronix_ts.ko[1]: syntax error: '☺─↑☻♣4' unexpected

 

[xminister]

Gib nach dem insmod mal dmesg ein, dort sollte dann etwas genauer stehen, was ihm nicht passt.

 

[baer.elektro]

<4>[ 923.368031] sitronix_ts: Unknown symbol Set_another_TP (err 0)

Da werde ich nicht schlauer. Bestimmt passt der Treiber von 4.0.1 nicht auf 4.1.1

Da stimmt auch mit Rechten was nicht
ohne chmod failed (No such file or directory)
mit chmod 644 Permission denied
mit chmod 777 syntax error: '☺─↑☻♣4' unexpected

 

[xminister]

Sieht ganz so aus, er muss halt zum Kernel passen.

 

[baer.elektro]

Dann müsste man das hier passend kompilieren.

/*
* drivers/input/touchscreen/sitronix_i2c_st1232.h
*
* Touchscreen driver for Sitronix
*
* Copyright (C) 2011 Sitronix Technology Co., Ltd.
* Rudy Huang <rudy_huang@sitronix.com.tw>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/


#ifndef __SITRONIX_I2C_ST1232_h
#define __SITRONIX_I2C_ST1232_h


#include <linux/ioctl.h> /* needed for the _IOW etc stuff used later */


#define SITRONIX_TOUCH_DRIVER_VERSION 0x01
#define SITRONIX_MAX_SUPPORTED_POINT 10
//#define SITRONIX_I2C_ST1232_NAME "st1232"
#define SITRONIX_I2C_ST1232_NAME "sitronix_ts"


#define EnableUpgradeMsg 1
//#define SITRONIX_DBGMSG 1


#ifdef EnableUpgradeMsg
#define UpgradeMsg(arg...) printk(arg)
#else
#define UpgradeMsg(arg...)
#endif


typedef enum{
FIRMWARE_VERSION,
STATUS_REG,
DEVICE_CONTROL_REG,
TIMEOUT_TO_IDLE_REG,
XY_RESOLUTION_HIGH,
X_RESOLUTION_LOW,
Y_RESOLUTION_LOW,
SENSING_COUNTER_HIGH,
SENSING_COUNTER_LOW,
RESERVED_0x09,
RESERVED_0x0A,
RESERVED_0x0B,
FIRMWARE_REVISION_3,
FIRMWARE_REVISION_2,
FIRMWARE_REVISION_1,
FIRMWARE_REVISION_0,
FINGERS,
KEYS_REG,
XY0_COORD_H,
X0_COORD_L,
Y0_COORD_L,
RESERVED_0x15,
XY1_COORD,
X1_COORD,
Y1_COORD,
RESERVED_0x19,
XY2_COORD,
X2_COORD,
Y2_COORD,
RESERVED_0x1D,
XY3_COORD,
X3_COORD,
Y3_COORD,
RESERVED_0x21,
XY4_COORD,
X4_COORD,
Y4_COORD,
RESERVED_0x25,
XY5_COORD,
X5_COORD,
Y5_COORD,
RESERVED_0x29,
XY6_COORD,
X6_COORD,
Y6_COORD,
RESERVED_0x2D,
XY7_COORD,
X7_COORD,
Y7_COORD,
RESERVED_0x31,
XY8_COORD,
X8_COORD,
Y8_COORD,
RESERVED_0x35,
XY9_COORD,
X9_COORD,
Y9_COORD,
RESERVED_0x39,
RESERVED_0x3A,
RESERVED_0x3B,
RESERVED_0x3C,
RESERVED_0x3D,
RESERVED_0x3E,
MAX_NUM_TOUCHES,
DATA_0_HIGH,
DATA_0_LOW,


PAGE_REG = 0xff,
}RegisterOffset;


#define SITRONIX_AUTOTUNE_CODE_BUFFER_SIZE 15*1024
#define SITRONIX_AUTOTUNE_TABLE_BUFFER_SIZE 512
#define SITRONIX_TOUCH_PARAM_BUFFER_SIZE 512
#define SITRONIX_TOUCH_FW_BUFFER_SIZE 16*1024
#define SITRONIX_JNI_BUFFER_SIZE 1024
#define SITRONIX_TS_CHANGE_MODE_DELAY 150


#define DEV_FLASH_SIZE 0x4000
#define DEV_FLAHS_PAGE_SIZE 512
#define TOUCH_TABLE_SIZE 0x600
#define AUTO_TUNE_CONFIG_TABLE_SIZE 512
#define AUTO_TUNE_CONFIG_TABLE_ADDR 0x3800
#define PANEL_PARAM_TABLE_SIZE 1535
#define PANEL_PARAM_TABLE_ADDR 0x3A00
#define ST1232_ROM_PARAM_ADR 0x3E00




#define ISP_PACKET_SIZE 8


#define ISP_CMD_ERASE 0x80
#define ISP_CMD_SEND_DATA 0x81
#define ISP_CMD_WRITE_FLASH 0x82
#define ISP_CMD_READ_FLASH 0x83
#define ISP_CMD_RESET 0x84
#define ISP_CMD_READY 0x8F


#define I2C_REG_FW_VERSION_ADDR 0x00
#define I2C_REG_DEV_CTRL_ADDR 0x02
#define I2C_REG_FW_REVISION_ADDR 0x0C


#define I2C_DEV_CTRL_RESET 0x01


#define ISP_PANEL_PARAM_ADDR 0x3A00
#define ISP_ALG_PARAM_PTR_OFFSET 0x06
#define ISP_ALG_PARAM1_SIZE 128
#define ISP_ALG_PARAM2_SIZE 128
#define ISP_ALG_PARAM_SIZE (ISP_ALG_PARAM1_SIZE+ISP_ALG_PARAM2_SIZE)
#define ISP_ALG_PARAM2_OFFSET (ISP_ALG_PARAM1_SIZE+32)
//======= [Auto Tune Definitions] =======
#define I2C_ATPAGE_FW_VERSION_ADDR 0x00
#define I2C_ATPAGE_STATUS_ADDR 0x01
#define I2C_ATPAGE_DEVICE_CTL_ADDR 0x02
#define I2C_ATPAGE_AP_STATUS_ADDR 0xE0
#define I2C_ATPAGE_AP_ERR_CODE_ADDR 0xE1
#define I2C_ATPAGE_MSG_ID_ADDR 0xE2
#define I2C_ATPAGE_MSG_DATA0_ADDR 0xE3
#define I2C_ATPAGE_MSG_DATA1_ADDR 0xE4
#define I2C_ATPAGE_MSG_DATA2_ADDR 0xE5
#define I2C_ATPAGE_MSG_DATA3_ADDR 0xE6
#define I2C_ATPAGE_AP_PC_ADDR 0xE7
#define I2C_ATPAGE_CURR_STEP_ADDR 0xE8
#define I2C_ATPAGE_TOTAL_STEP_ADDR 0xE9


#define DEVICE_CTL_AUTO_TUNE 0x80


#define DEVICE_STATUS_MASK 0x0F
#define DEVICE_ERR_CODE_MASK 0xF0
#define DEVICE_ERR_CODE(X) ((X&DEVICE_ERR_CODE_MASK)>>4))


#define DEVICE_STATUS_NORMAL 0x00
#define DEVICE_STATUS_INIT 0x01
#define DEVICE_STATUS_ERR 0x02


#define AT_AP_STATUS_AUTO_TUNING 0x00
#define AT_AP_STATUS_INIT 0x01
#define AT_AP_STATUS_READY 0x02
#define AT_AP_STATUS_ATUNE_FINISH 0x03
#define AT_AP_STATUS_ERROR 0xFF


typedef enum{
XY_COORD_H,
X_COORD_L,
Y_COORD_L,
RESERVED,
PIXEL_DATA_LENGTH,
}PIXEL_DATA_FORMAT;


#define X_RES_H_SHFT 4
#define X_RES_H_BMSK 0xf
#define Y_RES_H_SHFT 0
#define Y_RES_H_BMSK 0xf
#define FINGERS_SHFT 0
#define FINGERS_BMSK 0xf
#define X_COORD_VALID_SHFT 7
#define X_COORD_VALID_BMSK 0x1
#define X_COORD_H_SHFT 4
#define X_COORD_H_BMSK 0x7
#define Y_COORD_H_SHFT 0
#define Y_COORD_H_BMSK 0x7


#define SMT_IOC_MAGIC 0xf1


typedef enum{
SMT_GET_DRIVER_REVISION = 1,
SMT_GET_FW_REVISION,
SMT_WRITE_AUTO_TUNE_CODE_OFFSET,
SMT_WRITE_AUTO_TUNE_CODE_SIZE,
SMT_WRITE_AUTO_TUNE_CODE_DATA,
SMT_WRITE_AUTO_TUNE_TABLE_OFFSET,
SMT_WRITE_AUTO_TUNE_TABLE_SIZE,
SMT_WRITE_AUTO_TUNE_TABLE_DATA,
SMT_WRITE_TOUCH_PARAM_FILE_OFFSET,
SMT_WRITE_TOUCH_PARAM_FILE_SIZE,
SMT_WRITE_TOUCH_PARAM_FILE_DATA,
SMT_WRITE_TOUCH_FW_FILE_OFFSET,
SMT_WRITE_TOUCH_FW_FILE_SIZE,
SMT_WRITE_TOUCH_FW_FILE_DATA,
SMT_FW_UPGRADE_WITH_AUTO_TUNE,
SMT_UPGRADE_TOUCH_FW_AND_PARAM,
SMT_UPGRADE_TOUCH_FW,
SMT_DO_AUTOTUNE,
SMT_IOC_MAXNR,
}SITRONIX_SMT;


#define IOCTL_SMT_GET_DRIVER_REVISION _IOC(_IOC_READ, SMT_IOC_MAGIC, SMT_GET_DRIVER_REVISION, 1)
#define IOCTL_SMT_GET_FW_REVISION _IOC(_IOC_READ, SMT_IOC_MAGIC, SMT_GET_FW_REVISION, 4)
#define IOCTL_SMT_WRITE_AUTO_TUNE_CODE_OFFSET _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_CODE_OFFSET, 2)
#define IOCTL_SMT_WRITE_AUTO_TUNE_CODE_SIZE _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_CODE_SIZE, 2)
#define IOCTL_SMT_WRITE_AUTO_TUNE_CODE_DATA _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_CODE_DATA, 1024)
#define IOCTL_SMT_WRITE_AUTO_TUNE_TABLE_OFFSET _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_TABLE_OFFSET, 2)
#define IOCTL_SMT_WRITE_AUTO_TUNE_TABLE_SIZE _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_TABLE_SIZE, 2)
#define IOCTL_SMT_WRITE_AUTO_TUNE_TABLE_DATA _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_AUTO_TUNE_TABLE_DATA, 1024)
#define IOCTL_SMT_WRITE_TOUCH_PARAM_FILE_OFFSET _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_PARAM_FILE_OFFSET, 2)
#define IOCTL_SMT_WRITE_TOUCH_PARAM_FILE_SIZE _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_PARAM_FILE_SIZE, 2)
#define IOCTL_SMT_WRITE_TOUCH_PARAM_FILE_DATA _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_PARAM_FILE_DATA, 1024)
#define IOCTL_SMT_WRITE_TOUCH_FW_FILE_OFFSET _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_FW_FILE_OFFSET, 2)
#define IOCTL_SMT_WRITE_TOUCH_FW_FILE_SIZE _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_FW_FILE_SIZE, 2)
#define IOCTL_SMT_WRITE_TOUCH_FW_FILE_DATA _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_WRITE_TOUCH_FW_FILE_DATA, 1024)
#define IOCTL_SMT_FW_UPGRADE_WITH_AUTO_TUNE _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_FW_UPGRADE_WITH_AUTO_TUNE, 15)
#define IOCTL_SMT_UPGRADE_TOUCH_FW_AND_PARAM _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_UPGRADE_TOUCH_FW_AND_PARAM, 10)
#define IOCTL_SMT_UPGRADE_TOUCH_FW _IOC(_IOC_WRITE, SMT_IOC_MAGIC, SMT_UPGRADE_TOUCH_FW, 5)
#define IOCTL_SMT_DO_AUTOTUNE _IOC(_IOC_NONE, SMT_IOC_MAGIC, SMT_DO_AUTOTUNE, 0)


typedef struct _tag_MTD_STRUCTURE{
unsigned char EventType;
unsigned char PixelID;
u16 Pixel_X;
u16 Pixel_Y;
}MTD_STRUCTURE, *PMTD_STRUCTURE;


struct sitronix_i2c_st1232_platform_data {
uint32_t version; /* Use this entry for panels with */
/* (major << 8 | minor) version or above. */
/* If non-zero another array entry follows */
int (*power)(int on); /* Only valid in first array entry */
int (*init_irq)(void);
int (*get_int_status)(void);
void (*reset_ic)(void);
};


#endif // __SITRONIX_I2C_ST1232_h

 

[xminister]

Dann leg mal los.
Linux - linux-sunxi.org

 

[baer.elektro]

Ich - Windows User. Ich kann besser mit Lötkolben als mit Compiler umgehen :-(

 

[baer.elektro]

Mit dieser Version habe ich auch alles außer TS am laufen. Nur ist es Android 4.2 Wenn einer nur helfen würde TS zum laufen zu bringen (ich träume)

lsmod
8188eu 767523 0 - Live 0x00000000
dmard06 11388 0 - Live 0x00000000
mc32x0 13474 0 - Live 0x00000000
device 26958 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
camera 53105 0 - Live 0x00000000
videobuf_dma_contig 6243 0 - Live 0x00000000
videobuf_core 20242 1 videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 199639 67 - Live 0x00000000
ump 34033 13 mali, Live 0x00000000
A13_gslX680 61266 0 - Live 0x00000000
nand 224992 8 - Live 0x00000000