Odys One offizielles ICS-Update -Touchscreen funktioniert nicht mehr!

[andreaslutsch]

Hallo, ich habe mein Odys One mit das update von der Seite von Odys auf ICS gepatcht und habe die Anleitungen gefolgt.
Als es gebootet hat kam das erste Bild auf den Tablet und das Touchscreen funktioniert nicht. Die power on/off Taste funktioniert und die Reset Taste auch.
Hat jemand eine Idee wie man das reparieren kann ?
Danke für eure Hilfe!

 

[Oma7144]

Flash noch mal neu, inkl. EraseIDB.

 

[andreaslutsch]

Ja, hab den EraseIDB und Update durchgefürht aber touchscreen geht immer noch nicht.

 

[Oma7144]

Schließ mal eine USB-Maus an. Geht die?

 

[andreaslutsch]

Ja, Maus und Tastatur funktioniert aber es ist sehr umbequem es ist ein touchscreen tablet dieses 4.0 hat nur schlechtes gebracht.

 

[Oma7144]

Gut. Dann installiere mal ein Terminal, starte das Tab neu, gib dort dmesg ein und lade das Log dann
anschließend hier hoch.

 

[andreaslutsch]

Ok

app_52@android:/ $ dmesg
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.8+ (root@sc02-android-system)  (gcc version 4.4.0 (GCC) ) #140 PREEMPT Wed Aug 1 14:39:27 CST 2012
<4>[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK29board
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0a9f000 to fef00000 - fef01c20
<4>[    0.000000] CPU SRAM: copied sram data from c0aa0c20 to fef03000 - fef031d4
<6>[    0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/135/297/288/300/150/75/37/144/144/36 MHz (20110909)
<4>[    0.000000] DDR DEBUG: version 2.02 20111109
<4>[    0.000000] DDR DEBUG: DDR3 Device
<4>[    0.000000] DDR DEBUG: 1 CS, ROW=14, Bank=8, COL=10, Total Capability=512MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=420MHz
<4>[    0.000000] DDR DEBUG: CSR:0x0, RSLR0:0x249, RSLR1:0x0, RDGR0:0x55, RDGR1:0x55
<7>[    0.000000] On node 0 totalpages: 79616
<7>[    0.000000] free_area_init_node: node 0, pgdat c0a9d8e0, node_mem_map c0000000
<7>[    0.000000]   DMA zone: 622 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 78994 pages, LIFO batch:15
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 78994
<5>[    0.000000] Kernel command line: console=ttyS1,115200n8n  androidboot.console=ttyS1 init=/init initrd=0x62000000,0x110000  mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x00078000@0x00018000(backup),0x0003a000@0x00090000(cache),0x00100000@0x000ca000(userdata),0x00002000@0x001ca000(kpanic),0x000AF000@0x001cc000(system),-@0x0027B000(user) bootver=2011-09-08#2.08 firmware_ver=0.2.3
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 311MB = 311MB total
<5>[    0.000000] Memory: 296864k/296864k available, 21600k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>[    0.000000]     vmalloc : 0xd3800000 - 0xfe800000   ( 688 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd3700000   ( 311 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc048b000   ( 524 kB)
<5>[    0.000000]       .text : 0xc048b000 - 0xc0a35d24   (5804 kB)
<5>[    0.000000]       .data : 0xc0a36000 - 0xc0a9e5c0   ( 418 kB)
<5>[    0.000000]        .bss : 0xc0aa1024 - 0xc15270f0   (10777 kB)
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:388
<4>[    0.000000] rk29_gpio_init: 224 gpio irqs in 7 banks
<6>[    0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.005457] Calibrating delay loop (skipped) preset value.. 299.83 BogoMIPS (lpj=1499184)
<6>[    0.014615] pid_max: default: 32768 minimum: 301
<6>[    0.020125] Mount-cache hash table entries: 512
<6>[    0.025868] Initializing cgroup subsys debug
<6>[    0.030685] Initializing cgroup subsys cpuacct
<6>[    0.035752] Initializing cgroup subsys freezer
<6>[    0.040799] CPU: Testing write buffer coherency: ok
<6>[    0.047337] devtmpfs: initialized
<6>[    0.060657] print_constraints: dummy:
<6>[    0.065266] NET: Registered protocol family 16
<4>[    0.070335] last_log: 0xd3080000 0xc0aa2328
<6>[    0.084086] rk29sdk_wifi_bt_gpio_control_init: request wifi reset gpio failed
<6>[    0.131382] bio: create slab <bio-0> at 0
<5>[    0.137345] SCSI subsystem initialized
<6>[    0.142194] usbcore: registered new interface driver usbfs
<6>[    0.148493] usbcore: registered new interface driver hub
<6>[    0.154673] usbcore: registered new device driver usb
<6>[    0.161109] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
<6>[    0.167518] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
<6>[    0.174173] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
<6>[    0.180379] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
<6>[    0.186666] rk29-adc rk29-adc: rk29 adc: driver initialized
<6>[    0.511335] Advanced Linux Sound Architecture Driver Version 1.0.24.
<4>[    0.519477] rk29_tps65910_config: tps65910 init config.
<6>[    0.527904] TPS65910 Set default voltage.
<6>[    0.534715] Switching to clocksource timer3
<6>[    0.541780] Switched to NOHz mode on CPU #0
<4>[    0.573023] rk29_fb_io_init--->zpp trace
<3>[    0.577537] fail to get regulator tps65910_vaux2: -19
<4>[    1.021061]  rk29fb_probe ok
<6>[    1.039129] NET: Registered protocol family 2
<6>[    1.044401] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    1.052863] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    1.061644] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    1.069310] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    1.076620] TCP reno registered
<6>[    1.080210] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    1.086757] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    1.094478] NET: Registered protocol family 1
<4>[    1.509764] RK29 Backlight Driver Initialized.
<6>[    1.515213] Unpacking initramfs...
<4>[    1.539540] rk29_backlight_pwm_resume--->zpp trace
<6>[    1.777861] Freeing initrd memory: 1088K
<6>[    1.799930] print_constraints: VIO: 3300 mV normal
<6>[    1.820111] print_constraints: VDD1: 950 <--> 1400 mV at 1200 mV normal
<3>[    1.827881] machine_constraints_voltage: VDD2: unsupportable voltage constraints
<3>[    1.849594] tps65910_regulator tps65910_regulator.2: can't register VDD2, -22
<4>[    1.857564] tps65910_regulator: probe of tps65910_regulator.2 failed with error -22
<6>[    1.889538] print_constraints: VDIG1: 2700 mV normal
<6>[    1.896062] print_constraints: VDIG2: 1200 mV normal
<6>[    1.902140] print_constraints: VAUX33: 3300 mV normal
<6>[    1.908215] print_constraints: VMMC: 3000 mV normal
<6>[    1.914125] print_constraints: VAUX1: 2800 mV normal
<6>[    1.920148] print_constraints: VAUX2: 2900 mV normal
<6>[    1.926104] print_constraints: VDAC: 1800 mV normal
<6>[    1.932617] print_constraints: VPLL: 2500 mV normal
<6>[    1.938447] PMU: registered new PMU device of type 0
<6>[    1.944433] verifyid: initialized
<6>[    1.948533] Loaded driver for PL330 DMAC-0 rk29-pl330
<6>[    1.954261]       DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
<6>[    1.961236] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[    1.966896]       DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
<7>[    1.974628] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    1.975268] cpufreq: pre change
<7>[    1.975627] cpufreq: post change
<7>[    1.975646] cpufreq: got 408000 kHz
<4>[    1.978602] vpu_mem: 62 initialized
<4>[    1.982708] vpu: power on
<6>[    2.005791] VPU_SERVICE: HW ID = 0x67311148
<7>[    2.010564] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    2.010586] cpufreq: pre change
<7>[    2.010914] cpufreq: post change
<7>[    2.010921] cpufreq: got 1008000 kHz
<6>[    2.010934] VPU_SERVICE: Compatible HW found at 0x10104200
<6>[    2.017049] VPU_SERVICE: HW ID = 0x82701110
<6>[    2.021733] VPU_SERVICE: Compatible HW found at 0x10104000
<4>[    2.028071] vpu: power off...done
<6>[    2.051872] VPU_SERVICE: init success
<4>[    2.056024] ret=0x0
<6>[    2.065138] ashmem: initialized
<6>[    2.069161] fuse init (API version 7.16)
<6>[    2.074481] io scheduler noop registered
<6>[    2.078905] io scheduler cfq registered (default)
<6>[    2.085448] anx7150 1-0039: anx7150 unplug
<6>[    2.113952] anx7150 1-0039: anx7150 i2c probe ok
<6>[    2.119462] rk29_serial.1: ttyS1 at MMIO 0x20060000 (irq = 67) is a rk29_serial.1
<6>[    2.127787] rk29_serial rk29_serial.1: baud:115200
<4>[    2.133171] serial.1 timeout:1000000
<6>[    2.137196] console [ttyS1] enabled, bootconsole disabled
<6>[    2.159452] rk29_serial rk29_serial.1: membase 0xd3816000
<6>[    2.164874] rk29_serial.0: ttyS0 at MMIO 0x20030000 (irq = 66) is a rk29_serial.0
<6>[    2.189442] rk29_serial rk29_serial.0: membase 0xd381e000
<6>[    2.194863] rk29_serial.2: ttyS2 at MMIO 0x20064000 (irq = 68) is a rk29_serial.2
<7>[    2.209466] cpufreq: 518400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    2.209480] cpufreq: pre change
<7>[    2.209815] cpufreq: post change
<7>[    2.209824] cpufreq: got 816000 kHz
<6>[    2.219452] rk29_serial rk29_serial.2: membase 0xd3826000
<6>[    2.225130] Rockchip ion module(version: 1.0) is successfully loaded
<6>[    2.233489] loop: module loaded
<6>[    2.236670] pmem_cam: 1 init
<6>[    2.239794] pmem: 1 init
<6>[    2.243525] Android kernel panic handler initialized (bind=kpanic)
<4>[    2.249818] drivers/misc/rk29_modem/modem_rockchip_demo.c[57]: demo_init
<4>[    2.256515] drivers/misc/rk29_modem/rk29_modem.c[282]: rk29_modem_init
<4>[    2.263142] drivers/misc/rk29_modem/rk29_modem.c[208]: rk29_modem_dev_init
<6>[    2.270518] PPP generic driver version 2.4.2
<6>[    2.274919] PPP Deflate Compression module registered
<6>[    2.279999] PPP BSD Compression module registered
<6>[    2.285324] PPP MPPE Compression module registered
<7>[    2.290172] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    2.290186] cpufreq: pre change
<7>[    2.290513] cpufreq: post change
<7>[    2.290520] cpufreq: got 1008000 kHz
<6>[    2.290552] NET: Registered protocol family 24
<6>[    2.295077] usbcore: registered new interface driver asix
<6>[    2.300619] usbcore: registered new interface driver cdc_ether
<6>[    2.306478] usbcore: registered new interface driver dm9620
<6>[    2.312103] usbcore: registered new interface driver SR9700_android
<6>[    2.318398] usbcore: registered new interface driver net1080
<6>[    2.324104] usbcore: registered new interface driver cdc_subset
<6>[    2.330084] usbcore: registered new interface driver zaurus
<6>[    2.335664] cdc_ncm: 04-Aug-2011
<6>[    2.338926] usbcore: registered new interface driver cdc_ncm
<4>[    2.344593] Rockchip WiFi SYS interface (V1.00) ...
<6>[    2.349655] Initializing USB Mass Storage driver...
<6>[    2.354575] usbcore: registered new interface driver usb-storage
<6>[    2.360588] USB Mass Storage support registered.
<6>[    2.365313] usbcore: registered new interface driver usbserial
<6>[    2.371204] USB Serial support registered for generic
<6>[    2.376293] usbcore: registered new interface driver usbserial_generic
<6>[    2.382828] usbserial: USB Serial Driver core
<6>[    2.387215] USB Serial support registered for GSM modem (1-port)
<6>[    2.393272] usbcore: registered new interface driver option
<6>[    2.398838] option: v0.7.2:USB Driver for GSM modems
<6>[    2.403959] DWC_OTG: dwc_otg_driver_probe otg2.0 reg addr: 0x10180000 remap:0xd3880000
<6>[    2.622529] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    2.627161] usb20_otg usb20_otg: DWC OTG Controller
<6>[    2.632067] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[    2.639306] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[    2.644820] DWC_OTG: Init: Port Power? op_state=1
<6>[    2.649518] DWC_OTG: Init: Power Port (0)
<6>[    2.653665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.660466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.667681] usb usb1: Product: DWC OTG Controller
<6>[    2.672392] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
<6>[    2.678046] usb usb1: SerialNumber: usb20_otg
<6>[    2.682773] hub 1-0:1.0: USB hub found
<6>[    2.686531] hub 1-0:1.0: 1 port detected
<6>[    2.690873] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xd3900000
<6>[    2.909534] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    2.914155] usb20_host usb20_host: DWC OTG Controller
<6>[    2.919217] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[    2.926637] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[    2.932327] DWC_OTG: Init: Port Power? op_state=1
<6>[    2.937025] DWC_OTG: Init: Power Port (0)
<6>[    2.941084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.947868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.955158] usb usb2: Product: DWC OTG Controller
<6>[    2.959887] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
<6>[    2.965459] usb usb2: SerialNumber: usb20_host
<6>[    2.970282] hub 2-0:1.0: USB hub found
<6>[    2.974035] hub 2-0:1.0: 1 port detected
<6>[    2.978237] DWC_OTG: host11_driver_probe host1.1 reg addr: 0x10140000 remap:0xd3980000
<6>[    3.079446] usb 1-1: new low speed USB device number 2 using usb20_otg
<6>[    3.085970] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[    3.208765] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    3.213411] usb11_host usb11_host: DWC OTG Controller
<6>[    3.218474] usb11_host usb11_host: new USB bus registered, assigned bus number 3
<6>[    3.225901] usb11_host usb11_host: irq 50, io mem 0x00000000
<6>[    3.231582] DWC_OTG: Init: Port Power? op_state=1
<6>[    3.236279] DWC_OTG: Init: Power Port (0)
<6>[    3.240342] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    3.247125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    3.254420] usb usb3: Product: DWC OTG Controller
<6>[    3.259121] usb usb3: Manufacturer: Linux 3.0.8+ host11_hcd
<6>[    3.264701] usb usb3: SerialNumber: usb11_host
<6>[    3.269451] hub 3-0:1.0: USB hub found
<6>[    3.273209] hub 3-0:1.0: 1 port detected
<4>[    3.277409] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
<4>[    3.283784] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
<6>[    3.291017] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    3.297887] android_usb gadget: Number of LUNs=2
<6>[    3.302626]  lun0: LUN: removable file: (no medium)
<6>[    3.307514]  lun1: LUN: removable file: (no medium)
<6>[    3.312590] android_usb gadget: android_usb ready
<6>[    3.317524] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<6>[    3.324824] usbcore: registered new interface driver xpad
<6>[    3.330275] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[    3.335488] usbcore: registered new interface driver usb_acecad
<6>[    3.341430] acecad: v3.2:USB Acecad Flair tablet driver
<6>[    3.346702] usbcore: registered new interface driver aiptek
<6>[    3.352378] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[    3.360307] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[    3.367746] usbcore: registered new interface driver gtco
<4>[    3.373188] GTCO usb driver version: 2.00.0006
<6>[    3.377511] usbcore: registered new interface driver hanwang
<6>[    3.383416] usbcore: registered new interface driver kbtab
<6>[    3.388906] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[    3.394750] usbcore: registered new interface driver wacom
<6>[    3.400311] wacom: v1.52:USB Wacom tablet driver
<6>[    3.405287] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-004c/input/input1
<4>[    3.413271] i2c-core: driver [gs_mma7660] using legacy suspend method
<4>[    3.419732] i2c-core: driver [gs_mma7660] using legacy resume method
<6>[    3.427523] usb 1-1: New USB device found, idVendor=0a81, idProduct=0205
<6>[    3.435350] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[    3.442501] usb 1-1: Product: PS2 to USB Converter
<6>[    3.447300] usb 1-1: Manufacturer: CHESEN
<6>[    3.455666] using rtc device, tps65910_rtc, for alarms
<6>[    3.460809] tps65910_rtc tps65910_rtc: rtc core: registered tps65910_rtc as rtc0
<6>[    3.468383] TPS65910 RTC device successfully registered
<6>[    3.477700] lirc_dev: IR Remote Control driver registered, major 252
<6>[    3.484158] IR NEC protocol handler initialized
<6>[    3.488683] IR RC5(x) protocol handler initialized
<6>[    3.493504] IR RC6 protocol handler initialized
<6>[    3.498030] IR JVC protocol handler initialized
<6>[    3.502629] IR Sony protocol handler initialized
<6>[    3.507242] IR RC5 (streamzap) protocol handler initialized
<6>[    3.512819] IR LIRC bridge handler initialized
<6>[    3.517258] Linux video capture interface: v2.00
<6>[    3.522145] device-mapper: uevent: version 1.0.3
<6>[    3.526908] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [URL="https://mail.google.com/mail/u/0/h/vbr4xpmqxagj/?&v=b&cs=wh&to=dm-devel@redhat.com"]dm-devel@redhat.com[/URL]
<4>[    3.595932] rk29_sdmmc_change_clk_div..1682..  newDiv=80, newCLK=300Khz====xbw[sd_mmc]=====
<4>[    3.609493]
<4>[    3.609496] drivers/mmc/core/core.c...1823..  ===== mmc_rescan Begin....======xbw[mmc0]=====
<4>[    3.624503] .Line3371..The End of SDMMC-probe Ver.2.16 The  last modify date is 2012-02-13,modifyed by XBW. ===xbw[sd_mmc]===
<4>[    3.624512]
<4>[    3.637303] rk29_sdmmc_change_clk_div..1682..  newDiv=40, newCLK=300Khz====xbw[sdio]=====
<4>[    3.645619] .Line3371..The End of SDMMC-probe Ver.2.16 The  last modify date is 2012-02-13,modifyed by XBW. ===xbw[sdio]===
<4>[    3.645628]
<6>[    3.665938] input: CHESEN PS2 to USB Converter as /devices/platform/usb20_otg/usb1/1-1/1-1:1.0/input/input2
<6>[    3.676774] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[    3.684109] generic-usb 0003:0A81:0205.0001: input: USB HID  v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-usb20_otg-1/input0
<4>[    3.696255]
<4>[    3.696257] mmc_attach_sd..1216..  ===== Begin to identify card as SD-card ===xbw[mmc0]===
<6>[    3.715903] input: CHESEN PS2 to USB Converter as /devices/platform/usb20_otg/usb1/1-1/1-1:1.1/input/input3
<6>[    3.725667] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[    3.730963] generic-usb 0003:0A81:0205.0002: input: USB HID  v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-usb20_otg-1/input1
<6>[    3.742532] usbcore: registered new interface driver usbhid
<6>[    3.748125] usbhid: USB HID core driver
<6>[    3.752314] logger: created 256K log 'log_main'
<6>[    3.756922] logger: created 256K log 'log_events'
<6>[    3.761746] logger: created 256K log 'log_radio'
<6>[    3.766496] logger: created 256K log 'log_system'
<4>[    3.771360] ---- gpu regbase: 0xd3868000 ----
<4>[    3.806524] -----> dma_alloc_writecombine 1 pages!
<4>[    3.811374] -----> dma_alloc_writecombine 1 pages!
<4>[    3.816228] -----> dma_alloc_writecombine 128 pages!
<4>[    3.822049] -----> dma_alloc_writecombine 1 pages!
<6>[    3.831670] RT5631 Audio Codec 0.01 alsa 1.0.24
<7>[    3.899474] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    3.899488] cpufreq: pre change
<7>[    3.899847] cpufreq: post change
<7>[    3.899871] cpufreq: got 408000 kHz
<4>[    3.934187] rk29_sdmmc_change_clk_div..1682..  newDiv=1, newCLK=24000Khz====xbw[sd_mmc]=====
<6>[    3.943293] mmc0: new SDHC card at address b368
<6>[    3.948584] mmcblk0: mmc0:b368 NCard 7.48 GiB
<4>[    3.955726]
<4>[    3.955734] msdos_partition..461... ==== Begin to parse sdcard-partition.  ====xbw[mmc0]===
<4>[    3.965683] msdos_partition..530... ==== The sdcard has MBR. ====xbw[mmc0]===
<4>[    3.973106] msdos_partition..543... ==== partition-1, size=7845888KB  ====xbw[mmc0]===
<7>[    3.981155] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    3.981180] cpufreq: pre change
<7>[    3.981586] cpufreq: post change
<7>[    3.981594] cpufreq: got 1008000 kHz
<4>[    3.981641] msdos_partition..571... ==== main partition-1....====xbw[mmc0]===
<6>[    3.988794]  mmcblk0: p1
<4>[    3.991859] mmc_rescan_try_freq..1717..  ===== Initialize SD-card successfully. ===xbw[mmc0]===
<4>[    4.000674]
<4>[    4.000677] drivers/mmc/core/core.c...1823..  ===== mmc_rescan Begin....======xbw[mmc1]=====
<4>[    4.010723]
<4>[    4.010726] =================
<4>[    4.010729] mmc_rescan..1830..  ====find no SDMMC host.====xbw[mmc1]=====
<6>[    4.054366] RT5631 initial ok!
<3>[    4.057458] RT5631 0-001a: dapm: unknown pin HP_L
<7>[    4.062196] cpufreq: 532800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    4.062206] cpufreq: pre change
<7>[    4.062571] cpufreq: post change
<7>[    4.062582] cpufreq: got 816000 kHz
<3>[    4.062602] RT5631 0-001a: dapm: unknown pin HP_R
<6>[    4.087658] asoc: RT5631 HiFi <-> rk29_i2s.0 mapping ok
<6>[    4.093324] ALSA device list:
<6>[    4.096307]   #0: RK29_RT5631
<6>[    4.099381] GACT probability NOT on
<6>[    4.103000] Mirror/redirect action on
<6>[    4.106676] u32 classifier
<6>[    4.109384]     Actions configured
<6>[    4.112826] Netfilter messages via NETLINK v0.30.
<6>[    4.117609] nf_conntrack version 0.5.0 (4655 buckets, 18620 max)
<6>[    4.123916] ctnetlink v0.93: registering with nfnetlink.
<6>[    4.129295] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    4.136290] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<7>[    4.142166] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    4.142179] cpufreq: pre change
<7>[    4.142517] cpufreq: post change
<7>[    4.142525] cpufreq: got 1008000 kHz
<6>[    4.142758] xt_time: kernel timezone is -0000
<6>[    4.147288] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.152862] arp_tables: (C) 2002 David S. Miller
<6>[    4.157539] TCP cubic registered
<6>[    4.160895] NET: Registered protocol family 10
<6>[    4.165910] Mobile IPv6
<6>[    4.168390] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.173957] IPv6 over IPv4 tunneling driver
<6>[    4.178859] NET: Registered protocol family 17
<6>[    4.183378] NET: Registered protocol family 15
<5>[    4.187881] Bridge firewalling registered
<6>[    4.191939] NET: Registered protocol family 35
<4>[    4.196473] ft5x0x_ts_probe!
<4>[    4.199363] ft5406_init_platform_hw
<7>[    4.279461] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    4.279474] cpufreq: pre change
<7>[    4.279810] cpufreq: post change
<7>[    4.279831] cpufreq: got 408000 kHz
<6>[    4.529562] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.535152] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.543048] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.548645] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.556606] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.562228] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.570087] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.575684] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<7>[    4.583516] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    4.583539] cpufreq: pre change
<7>[    4.583866] cpufreq: post change
<7>[    4.583873] cpufreq: got 1008000 kHz
<6>[    4.583938] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.589518] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.597307] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.602945] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.610756] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.616317] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.624133] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.629711] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.637510] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.643083] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.650945] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.656513] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.664333] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.669907] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.677699] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.683278] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.691085] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.696649] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.704521] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.710097] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.717891] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.723470] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.731276] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.736839] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.744658] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.750293] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.758091] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.763668] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.771471] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.777033] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<6>[    4.784850] rk29_i2c rk29_i2c.2: addr: 0x38 receive no ack
<3>[    4.790429] rk29_i2c rk29_i2c.2: i2c transfer err, client address is 0x38 [20110106]
<4>[    4.798174] FT5406 I2C TEST ERROR!
<4>[    4.801652] ft5406_exit_platform_hw
<3>[    4.805292] RK29 Camera driver version: v0.1.10
<4>[    4.809914] rk29_sensor_io_init..ov5642_back..powerdown pin(307) init failed
<4>[    4.816968] rk29_sensor_io_deinit..ov5642_back enter..
<7>[    4.949458] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    4.949471] cpufreq: pre change
<7>[    4.949804] cpufreq: post change
<7>[    4.949825] cpufreq: got 408000 kHz
<6>[    4.999601] camera 33-0-ov7675_front: Probe ov7675_front success
<4>[    5.005961] ipp irq 46
<6>[    5.008657] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>[    5.016429] ThumbEE CPU extension supported.
<4>[    5.021697] Install touch driver..the tp is nt11003,not touchplus tp_flag=0
<4>[    5.359468] nt11003_init_platform_hw
<6>[    5.363426] input: nt1103-ts as /devices/virtual/input/input4
<4>[    5.369419] nvctp_CheckIsBootloader
<4>[    5.373066] =======FW_CHECKSUM = 0x7f23
<7>[    5.429488] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    5.429513] cpufreq: pre change
<7>[    5.429844] cpufreq: post change
<7>[    5.429851] cpufreq: got 1008000 kHz
<4>[    6.386589] =======DynCHECKSUM = 0x7f23
<4>[    6.451081] =======DynCHECKSUM = 0x7f23
<6>[    6.662392] tps65910_rtc tps65910_rtc: setting system clock to 2012-12-01 20:57:46 UTC (1354395466)
<6>[    6.671698] rk29_serial rk29_serial.1: baud:115200
<4>[    6.676504] serial.1 timeout:1000000
<6>[    6.680215] Freeing init memory: 524K
<4>[    6.686645] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[    6.736621] keychord: using input dev rk29-keypad for fevent
<6>[    6.742362] keychord: using input dev CHESEN PS2 to USB Converter for fevent
<6>[    6.749685] keychord: using input dev CHESEN PS2 to USB Converter for fevent
<6>[    6.756901] rk29_serial rk29_serial.1: baud:115200
<4>[    6.761723] serial.1 timeout:1000000
<3>[    6.765514] init: cannot open '/initlogo.rle'
<7>[    6.789478] cpufreq: 748800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    6.789501] cpufreq: pre change
<7>[    6.789853] cpufreq: post change
<7>[    6.789866] cpufreq: got 816000 kHz
<4>[    6.810999] rk29xxnand_ko: module license '' taints kernel.
<4>[    6.816600] Disabling lock debugging due to kernel taint
<4>[    6.827392] gp_rknand_info = : 0xd33fd740
<4>[    6.831687] FlashCopyProgBuf1=0xc13c7000
<4>[    6.835634] ATime: 50 ns AHB: 210 timming: 10e3,r 10e3,w1083
<4>[    6.841327] No.1 FLASH INFO:ad d7 94 9a 74
<4>[    6.845851] ATime: 36 ns AHB: 144 timming: 1081,r 1081,w1061
<4>[    6.851760] ATime: 36 ns AHB: 144 timming: 1081,r 1081,w1061
<4>[    6.857427] randomizer = 0
<7>[    6.869468] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    6.869484] cpufreq: pre change
<7>[    6.869817] cpufreq: post change
<7>[    6.869825] cpufreq: got 1008000 kHz
<4>[    6.888471] FTL INFO:Version = 432,Date = 20120320
<4>[    6.893275] totalLogicBlkRaw  = 1904
<5>[    6.897084] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[    6.903549] Creating 10 MTD partitions on "rk29xxnand":
<5>[    6.908786] 0x000000400000-0x000000800000 : "misc"
<5>[    6.914895] 0x000000800000-0x000001000000 : "kernel"
<5>[    6.920838] 0x000001000000-0x000002000000 : "boot"
<5>[    6.926540] 0x000002000000-0x000003000000 : "recovery"
<5>[    6.932658] 0x000003000000-0x000012000000 : "backup"
<5>[    6.939030] 0x000012000000-0x000019400000 : "cache"
<5>[    6.945138] 0x000019400000-0x000039400000 : "userdata"
<5>[    6.952365] 0x000039400000-0x000039800000 : "kpanic"
<6>[    6.958551] apanic: Bound to mtd partition 'kpanic'
<6>[    6.963475] apanic: No panic data available
<5>[    6.967831] 0x000039800000-0x00004f600000 : "system"
<5>[    6.974486] 0x00004f600000-0x0000ee000000 : "user"
<4>[    6.985657] startBlk = 160
<4>[    6.988458] sysProtAddr = 159
<7>[    7.029498] cpufreq: 489600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    7.029518] cpufreq: pre change
<7>[    7.029853] cpufreq: post change
<7>[    7.029865] cpufreq: got 816000 kHz
<6>[    7.032467] EXT3-fs: barriers not enabled
<6>[    7.036693] EXT3-fs (mtdblock8): mounted filesystem with ordered data mode
<6>[    7.043791] kjournald starting.  Commit interval 5 seconds
<6>[    7.067043] EXT3-fs: barriers not enabled
<6>[    7.071426] EXT3-fs (mtdblock6): using internal journal
<6>[    7.076679] EXT3-fs (mtdblock6): mounted filesystem with ordered data mode
<6>[    7.083631] kjournald starting.  Commit interval 5 seconds
<6>[    7.097960] EXT3-fs: barriers not enabled
<6>[    7.102418] EXT3-fs (mtdblock5): using internal journal
<6>[    7.107675] EXT3-fs (mtdblock5): mounted filesystem with ordered data mode
<7>[    7.114631] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    7.114646] cpufreq: pre change
<7>[    7.114981] cpufreq: post change
<7>[    7.114991] cpufreq: got 1008000 kHz
<6>[    7.115011] kjournald starting.  Commit interval 5 seconds
<3>[    7.149213] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<7>[    7.189483] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    7.189502] cpufreq: pre change
<7>[    7.189846] cpufreq: post change
<7>[    7.189867] cpufreq: got 408000 kHz
<4>[    7.229920] vpu_mem: Unknown symbol platform_driver_unregister (err 0)
<4>[    7.236669] vpu_mem: Unknown symbol platform_driver_register (err 0)
<4>[    7.251272] vpu_service: Unknown symbol platform_driver_unregister (err 0)
<4>[    7.258260] vpu_service: Unknown symbol platform_device_register (err 0)
<4>[    7.265278] vpu_service: Unknown symbol platform_device_unregister (err 0)
<7>[    7.272650] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    7.272679] cpufreq: pre change
<7>[    7.273034] cpufreq: post change
<7>[    7.273044] cpufreq: got 1008000 kHz
<4>[    7.273253] vpu_service: Unknown symbol __wake_up_sync (err 0)
<4>[    7.279267] vpu_service: Unknown symbol platform_driver_probe (err 0)
<7>[    7.309482] cpufreq: 734400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    7.309499] cpufreq: pre change
<7>[    7.309830] cpufreq: post change
<7>[    7.309842] cpufreq: got 816000 kHz
<7>[    7.349569] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    7.349588] cpufreq: pre change
<7>[    7.349927] cpufreq: post change
<7>[    7.349949] cpufreq: got 408000 kHz
<4>[    7.355870] galcore: module is from the staging directory, the quality is unknown, you have been warned.
<3>[    7.377304] galcore: module is already loaded
<7>[    7.389551] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    7.389584] cpufreq: pre change
<7>[    7.389933] cpufreq: post change
<7>[    7.389942] cpufreq: got 1008000 kHz
<7>[    7.429488] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    7.429506] cpufreq: pre change
<7>[    7.429844] cpufreq: post change
<7>[    7.429865] cpufreq: got 408000 kHz
<4>[    7.475220] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    7.485749] rk29_ipp: Unknown symbol ipp_blit_sync (err 0)
<3>[    7.509979] android_usb: already disabled
<4>[    7.514559] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
<7>[    7.521054] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    7.521082] cpufreq: pre change
<7>[    7.521424] cpufreq: post change
<7>[    7.521439] cpufreq: got 1008000 kHz
<6>[    7.522236] rk29_serial rk29_serial.1: baud:115200
<4>[    7.527225] serial.1 timeout:1000000
<4>[    7.531014] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
<7>[    7.599592] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    7.599613] cpufreq: pre change
<7>[    7.599957] cpufreq: post change
<7>[    7.599979] cpufreq: got 408000 kHz
<7>[    7.889610] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    7.889647] cpufreq: pre change
<7>[    7.889991] cpufreq: post change
<7>[    7.890000] cpufreq: got 1008000 kHz
<4>[    7.922882] .334.. MMC0 receive the message sd-No-Media from VOLD.====xbw[sd_mmc]====
<4>[    7.930767] .378.. MMC0 receive the message No-Media from VOLD. waitTimes=0 ====xbw[sd_mmc]====
<4>[    7.958782] .334.. MMC0 receive the message sd-Pending from VOLD.====xbw[sd_mmc]====
<4>[    7.967274] .334.. MMC0 receive the message sd-Idle-Unmounted from VOLD.====xbw[sd_mmc]====
<7>[    8.029494] cpufreq: 561600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    8.029514] cpufreq: pre change
<7>[    8.029850] cpufreq: post change
<7>[    8.029862] cpufreq: got 816000 kHz
<4>[    8.052061] Current WiFi chip is RTL8188.
<7>[    8.279592] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    8.279615] cpufreq: pre change
<7>[    8.279951] cpufreq: post change
<7>[    8.279961] cpufreq: got 1008000 kHz
<7>[    8.765039] cpufreq: 691200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    8.765060] cpufreq: pre change
<7>[    8.765396] cpufreq: post change
<7>[    8.765408] cpufreq: got 816000 kHz
<7>[    9.179551] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    9.179573] cpufreq: pre change
<7>[    9.179909] cpufreq: post change
<7>[    9.179918] cpufreq: got 1008000 kHz
<3>[    9.252655] ov7675 sensor_ioctl cmd(0x3) is unknown !
<7>[    9.259507] cpufreq: 720000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    9.259531] cpufreq: pre change
<7>[    9.259866] cpufreq: post change
<7>[    9.259878] cpufreq: got 816000 kHz
<7>[    9.299552] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    9.299570] cpufreq: pre change
<7>[    9.299922] cpufreq: post change
<7>[    9.299945] cpufreq: got 408000 kHz
<7>[    9.429619] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    9.429657] cpufreq: pre change
<7>[    9.430000] cpufreq: post change
<7>[    9.430009] cpufreq: got 1008000 kHz
<3>[    9.496127] init: sys_prop: permission denied uid:1003  name:sys.gvglk.version
<3>[    9.503906] init: sys_prop: permission denied uid:1003  name:sys.gvglu.version
<7>[    9.509593] cpufreq: 705600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[    9.509610] cpufreq: pre change
<7>[    9.509958] cpufreq: post change
<7>[    9.509970] cpufreq: got 816000 kHz
<7>[    9.549617] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    9.549637] cpufreq: pre change
<7>[    9.549981] cpufreq: post change
<7>[    9.549991] cpufreq: got 1008000 kHz
<7>[    9.599580] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[    9.599600] cpufreq: pre change
<7>[    9.600241] cpufreq: post change
<7>[    9.600269] cpufreq: got 408000 kHz
<7>[    9.969542] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[    9.969580] cpufreq: pre change
<7>[    9.969923] cpufreq: post change
<7>[    9.969933] cpufreq: got 1008000 kHz
<7>[   10.089506] cpufreq: 604800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   10.089527] cpufreq: pre change
<7>[   10.089871] cpufreq: post change
<7>[   10.089884] cpufreq: got 816000 kHz
<7>[   10.169496] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   10.169512] cpufreq: pre change
<7>[   10.169857] cpufreq: post change
<7>[   10.169881] cpufreq: got 408000 kHz
<4>[   10.250287] gpu: change freq to 552, got 420
<7>[   10.329592] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   10.329629] cpufreq: pre change
<7>[   10.329972] cpufreq: post change
<7>[   10.329981] cpufreq: got 1008000 kHz
<7>[   10.449553] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   10.449572] cpufreq: pre change
<7>[   10.449915] cpufreq: post change
<7>[   10.449938] cpufreq: got 408000 kHz
<7>[   10.829559] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   10.829595] cpufreq: pre change
<7>[   10.829947] cpufreq: post change
<7>[   10.829957] cpufreq: got 1008000 kHz
<7>[   10.869512] cpufreq: 676800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   10.869530] cpufreq: pre change
<7>[   10.869883] cpufreq: post change
<7>[   10.869896] cpufreq: got 816000 kHz
<7>[   11.069508] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   11.069528] cpufreq: pre change
<7>[   11.069865] cpufreq: post change
<7>[   11.069874] cpufreq: got 1008000 kHz
<7>[   11.189507] cpufreq: 734400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   11.189529] cpufreq: pre change
<7>[   11.189883] cpufreq: post change
<7>[   11.189895] cpufreq: got 816000 kHz
<7>[   11.269683] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   11.269713] cpufreq: pre change
<7>[   11.270064] cpufreq: post change
<7>[   11.270075] cpufreq: got 1008000 kHz
<7>[   11.389518] cpufreq: 792000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   11.389539] cpufreq: pre change
<7>[   11.389894] cpufreq: post change
<7>[   11.389907] cpufreq: got 816000 kHz
<7>[   11.789553] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   11.789574] cpufreq: pre change
<7>[   11.789910] cpufreq: post change
<7>[   11.789920] cpufreq: got 1008000 kHz
<7>[   12.170829] cpufreq: 648000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   12.170849] cpufreq: pre change
<7>[   12.171187] cpufreq: post change
<7>[   12.171199] cpufreq: got 816000 kHz
<7>[   12.209546] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   12.209567] cpufreq: pre change
<7>[   12.209915] cpufreq: post change
<7>[   12.209925] cpufreq: got 1008000 kHz
<7>[   12.249583] cpufreq: 662400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   12.249602] cpufreq: pre change
<7>[   12.249937] cpufreq: post change
<7>[   12.249949] cpufreq: got 816000 kHz
<7>[   12.659564] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   12.659579] cpufreq: pre change
<7>[   12.660043] cpufreq: post change
<7>[   12.660072] cpufreq: got 408000 kHz
<7>[   12.739565] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   12.739601] cpufreq: pre change
<7>[   12.739943] cpufreq: post change
<7>[   12.739952] cpufreq: got 1008000 kHz
<7>[   12.939507] cpufreq: 720000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   12.939524] cpufreq: pre change
<7>[   12.939866] cpufreq: post change
<7>[   12.939878] cpufreq: got 816000 kHz
<7>[   13.099593] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   13.099613] cpufreq: pre change
<7>[   13.099949] cpufreq: post change
<7>[   13.099959] cpufreq: got 1008000 kHz
<7>[   13.179535] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   13.179554] cpufreq: pre change
<7>[   13.179918] cpufreq: post change
<7>[   13.179942] cpufreq: got 408000 kHz
<7>[   14.499693] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   14.499727] cpufreq: pre change
<7>[   14.500070] cpufreq: post change
<7>[   14.500080] cpufreq: got 1008000 kHz
<7>[   15.099582] cpufreq: 604800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   15.099603] cpufreq: pre change
<7>[   15.099939] cpufreq: post change
<7>[   15.099952] cpufreq: got 816000 kHz
<7>[   15.139518] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   15.139539] cpufreq: pre change
<7>[   15.139872] cpufreq: post change
<7>[   15.139881] cpufreq: got 1008000 kHz
<6>[   18.826645] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<7>[   18.900367] cpufreq: 489600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   18.900397] cpufreq: pre change
<7>[   18.900767] cpufreq: post change
<7>[   18.900781] cpufreq: got 816000 kHz
<7>[   18.939554] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   18.939575] cpufreq: pre change
<7>[   18.939912] cpufreq: post change
<7>[   18.939921] cpufreq: got 1008000 kHz
<7>[   19.019512] cpufreq: 763200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   19.019532] cpufreq: pre change
<7>[   19.019868] cpufreq: post change
<7>[   19.019881] cpufreq: got 816000 kHz
<7>[   19.060184] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   19.060202] cpufreq: pre change
<7>[   19.060568] cpufreq: post change
<7>[   19.060590] cpufreq: got 408000 kHz
<7>[   19.819633] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   19.819669] cpufreq: pre change
<7>[   19.820014] cpufreq: post change
<7>[   19.820023] cpufreq: got 1008000 kHz
<7>[   20.299661] cpufreq: 705600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   20.299677] cpufreq: pre change
<7>[   20.300012] cpufreq: post change
<7>[   20.300024] cpufreq: got 816000 kHz
<7>[   20.519581] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   20.519604] cpufreq: pre change
<7>[   20.519940] cpufreq: post change
<7>[   20.519949] cpufreq: got 1008000 kHz
<7>[   20.650062] cpufreq: 417600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   20.650090] cpufreq: pre change
<7>[   20.650447] cpufreq: post change
<7>[   20.650463] cpufreq: got 816000 kHz
<7>[   20.689525] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   20.689544] cpufreq: pre change
<7>[   20.689887] cpufreq: post change
<7>[   20.689911] cpufreq: got 408000 kHz
<7>[   20.732670] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   20.732700] cpufreq: pre change
<7>[   20.733041] cpufreq: post change
<7>[   20.733049] cpufreq: got 1008000 kHz
<7>[   20.810224] cpufreq: 734400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   20.810252] cpufreq: pre change
<7>[   20.810628] cpufreq: post change
<7>[   20.810643] cpufreq: got 816000 kHz
<7>[   20.889608] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   20.889623] cpufreq: pre change
<7>[   20.890174] cpufreq: post change
<7>[   20.890200] cpufreq: got 408000 kHz
<7>[   21.029656] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   21.029704] cpufreq: pre change
<7>[   21.030070] cpufreq: post change
<7>[   21.030080] cpufreq: got 1008000 kHz
<7>[   21.069501] cpufreq: 792000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   21.069518] cpufreq: pre change
<7>[   21.069869] cpufreq: post change
<7>[   21.069880] cpufreq: got 816000 kHz
<7>[   21.109618] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   21.109633] cpufreq: pre change
<7>[   21.110060] cpufreq: post change
<7>[   21.110083] cpufreq: got 408000 kHz
<7>[   21.269594] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   21.269629] cpufreq: pre change
<7>[   21.269972] cpufreq: post change
<7>[   21.269981] cpufreq: got 1008000 kHz
<7>[   21.391938] cpufreq: 806400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   21.391960] cpufreq: pre change
<7>[   21.392296] cpufreq: post change
<7>[   21.392308] cpufreq: got 816000 kHz
<7>[   21.549674] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   21.549695] cpufreq: pre change
<7>[   21.550240] cpufreq: post change
<7>[   21.550271] cpufreq: got 408000 kHz
<7>[   21.709599] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   21.709636] cpufreq: pre change
<7>[   21.709978] cpufreq: post change
<7>[   21.709987] cpufreq: got 1008000 kHz
<7>[   21.789587] cpufreq: 676800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   21.789607] cpufreq: pre change
<7>[   21.789955] cpufreq: post change
<7>[   21.789967] cpufreq: got 816000 kHz
<7>[   21.869525] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   21.869542] cpufreq: pre change
<7>[   21.869983] cpufreq: post change
<7>[   21.869993] cpufreq: got 1008000 kHz
<7>[   21.989586] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   21.989607] cpufreq: pre change
<7>[   21.993194] cpufreq: post change
<7>[   21.993238] cpufreq: got 408000 kHz
<7>[   22.037131] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   22.037160] cpufreq: pre change
<7>[   22.037539] cpufreq: post change
<7>[   22.037548] cpufreq: got 1008000 kHz
<7>[   22.069538] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   22.069551] cpufreq: pre change
<7>[   22.069889] cpufreq: post change
<7>[   22.069907] cpufreq: got 408000 kHz
<7>[   22.189576] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   22.189610] cpufreq: pre change
<7>[   22.189963] cpufreq: post change
<7>[   22.189973] cpufreq: got 1008000 kHz
<7>[   22.229563] cpufreq: 792000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   22.229579] cpufreq: pre change
<7>[   22.229913] cpufreq: post change
<7>[   22.229924] cpufreq: got 816000 kHz
<7>[   22.270071] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   22.270088] cpufreq: pre change
<7>[   22.270430] cpufreq: post change
<7>[   22.270468] cpufreq: got 408000 kHz
<7>[   22.559597] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   22.559633] cpufreq: pre change
<7>[   22.559976] cpufreq: post change
<7>[   22.559985] cpufreq: got 1008000 kHz
<7>[   22.599582] cpufreq: 662400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   22.599601] cpufreq: pre change
<7>[   22.599934] cpufreq: post change
<7>[   22.599946] cpufreq: got 816000 kHz
<7>[   23.129572] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   23.129594] cpufreq: pre change
<7>[   23.129930] cpufreq: post change
<7>[   23.129939] cpufreq: got 1008000 kHz
<7>[   23.209500] cpufreq: 763200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   23.209521] cpufreq: pre change
<7>[   23.209866] cpufreq: post change
<7>[   23.209878] cpufreq: got 816000 kHz
<7>[   23.649758] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   23.649788] cpufreq: pre change
<7>[   23.650147] cpufreq: post change
<7>[   23.650159] cpufreq: got 1008000 kHz
<7>[   23.809554] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   23.809590] cpufreq: pre change
<7>[   23.809964] cpufreq: post change
<7>[   23.809987] cpufreq: got 408000 kHz
<7>[   23.929615] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   23.929652] cpufreq: pre change
<7>[   23.929996] cpufreq: post change
<7>[   23.930005] cpufreq: got 1008000 kHz
<7>[   24.049707] cpufreq: 691200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   24.049729] cpufreq: pre change
<7>[   24.050074] cpufreq: post change
<7>[   24.050087] cpufreq: got 816000 kHz
<7>[   24.190313] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   24.190342] cpufreq: pre change
<7>[   24.190744] cpufreq: post change
<7>[   24.190772] cpufreq: got 408000 kHz
<7>[   24.309585] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   24.309621] cpufreq: pre change
<7>[   24.309972] cpufreq: post change
<7>[   24.309983] cpufreq: got 1008000 kHz
<7>[   24.349591] cpufreq: 676800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   24.349611] cpufreq: pre change
<7>[   24.349946] cpufreq: post change
<7>[   24.349958] cpufreq: got 816000 kHz
<7>[   24.389546] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   24.389567] cpufreq: pre change
<7>[   24.389903] cpufreq: post change
<7>[   24.389913] cpufreq: got 1008000 kHz
<7>[   24.719538] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   24.719557] cpufreq: pre change
<7>[   24.719901] cpufreq: post change
<7>[   24.719923] cpufreq: got 408000 kHz
<7>[   25.269638] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   25.269675] cpufreq: pre change
<7>[   25.270018] cpufreq: post change
<7>[   25.270028] cpufreq: got 1008000 kHz
<7>[   25.389518] cpufreq: 532800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   25.389535] cpufreq: pre change
<7>[   25.390289] cpufreq: post change
<7>[   25.390302] cpufreq: got 816000 kHz
<7>[   25.429521] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   25.429550] cpufreq: pre change
<7>[   25.429894] cpufreq: post change
<7>[   25.429918] cpufreq: got 408000 kHz
<7>[   25.979657] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   25.979693] cpufreq: pre change
<7>[   25.980038] cpufreq: post change
<7>[   25.980047] cpufreq: got 1008000 kHz
<6>[   26.170249] request_suspend_state: wakeup (3->0) at 26170818473 (2012-12-01 20:58:06.000029278 UTC)
<4>[   26.487082] Current WiFi chip is RTL8188.
<4>[   26.551903] =======================================================
<4>[   26.551918] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[   26.551925] =======================================================
<4>[   26.551933] RTL8192/RTL8188 USB WiFi driver (Powered by Rockchip,Ver 3.29) init.
<6>[   26.637501] acc_open
<6>[   26.643240] acc_release
<6>[   27.139563] usb 3-1: new full speed USB device number 2 using usb11_host
<6>[   27.159542] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[   27.369664] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[   27.411619] usb 3-1: not running at top speed; connect to a high speed hub
<6>[   27.434042] usb 3-1: New USB device found, idVendor=0bda, idProduct=8176
<6>[   27.476743] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[   27.476757] usb 3-1: Product: 802.11n WLAN Adapter
<6>[   27.476765] usb 3-1: Manufacturer: Realtek
<6>[   27.476772] usb 3-1: SerialNumber: 00e04c000001
<6>[   28.845621] usbcore: registered new interface driver rtl8192cu
<4>[   29.651078] +871x_drv - dev_open
<4>[   31.889723] MAC Address = 00:36:13:02:c3:52
<6>[   31.940628] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[   31.967863] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   32.137677] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<7>[   32.539600] cpufreq: 748800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   32.539628] cpufreq: pre change
<7>[   32.539963] cpufreq: post change
<7>[   32.539976] cpufreq: got 816000 kHz
<7>[   32.580107] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   32.580125] cpufreq: pre change
<7>[   32.580596] cpufreq: post change
<7>[   32.580623] cpufreq: got 408000 kHz
<7>[   33.149828] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   33.149857] cpufreq: pre change
<7>[   33.150199] cpufreq: post change
<7>[   33.150207] cpufreq: got 1008000 kHz
<3>[   33.495298] init: sys_prop: permission denied uid:10033  name:sys.gvglk.version
<3>[   33.495463] init: sys_prop: permission denied uid:10033  name:sys.gvglu.version
<3>[   33.545087] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.561987] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.572621] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.580320] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.587914] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.596739] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.605284] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.615470] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.844591] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.853858] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.862371] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.873000] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.908206] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.931287] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.956996] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   33.988436] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   34.014090] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<4>[   34.092855] .334.. MMC0 receive the message sd-Checking from VOLD.====xbw[sd_mmc]====
<4>[   34.100289] .334.. MMC0 receive the message sd-Mounted from VOLD.====xbw[sd_mmc]====
<6>[   34.243140] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[   34.729530] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   34.729549] cpufreq: pre change
<7>[   34.729895] cpufreq: post change
<7>[   34.729921] cpufreq: got 408000 kHz
<7>[   34.769576] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   34.769613] cpufreq: pre change
<7>[   34.769957] cpufreq: post change
<7>[   34.769966] cpufreq: got 1008000 kHz
<6>[   34.860626] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<7>[   34.949499] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   34.949516] cpufreq: pre change
<7>[   34.949860] cpufreq: post change
<7>[   34.949884] cpufreq: got 408000 kHz
<7>[   35.029604] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   35.029641] cpufreq: pre change
<7>[   35.029985] cpufreq: post change
<7>[   35.029995] cpufreq: got 1008000 kHz
<7>[   35.109558] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   35.109575] cpufreq: pre change
<7>[   35.109918] cpufreq: post change
<7>[   35.109942] cpufreq: got 408000 kHz
<7>[   35.190995] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   35.191050] cpufreq: pre change
<7>[   35.191393] cpufreq: post change
<7>[   35.191403] cpufreq: got 1008000 kHz
<7>[   35.509595] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   35.509614] cpufreq: pre change
<7>[   35.509960] cpufreq: post change
<7>[   35.509984] cpufreq: got 408000 kHz
<7>[   35.549593] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   35.549630] cpufreq: pre change
<7>[   35.550383] cpufreq: post change
<7>[   35.550394] cpufreq: got 1008000 kHz
<7>[   35.709547] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   35.709565] cpufreq: pre change
<7>[   35.709909] cpufreq: post change
<7>[   35.709985] cpufreq: got 408000 kHz
<7>[   36.249590] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   36.249627] cpufreq: pre change
<7>[   36.250009] cpufreq: post change
<7>[   36.250020] cpufreq: got 1008000 kHz
<7>[   36.329470] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   36.329487] cpufreq: pre change
<7>[   36.329925] cpufreq: post change
<7>[   36.329950] cpufreq: got 408000 kHz
<7>[   36.450665] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   36.450716] cpufreq: pre change
<7>[   36.451061] cpufreq: post change
<7>[   36.451070] cpufreq: got 1008000 kHz
<3>[   38.107886] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<7>[   38.809536] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   38.809556] cpufreq: pre change
<7>[   38.810000] cpufreq: post change
<7>[   38.810027] cpufreq: got 408000 kHz
<7>[   38.969618] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   38.969656] cpufreq: pre change
<7>[   38.969999] cpufreq: post change
<7>[   38.970009] cpufreq: got 1008000 kHz
<7>[   39.449553] cpufreq: 532800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   39.449565] cpufreq: pre change
<7>[   39.449901] cpufreq: post change
<7>[   39.449913] cpufreq: got 816000 kHz
<7>[   39.489502] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   39.489517] cpufreq: pre change
<7>[   39.489987] cpufreq: post change
<7>[   39.490011] cpufreq: got 408000 kHz
<7>[   39.530125] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   39.530152] cpufreq: pre change
<7>[   39.530514] cpufreq: post change
<7>[   39.530523] cpufreq: got 1008000 kHz
<7>[   39.569534] cpufreq: 748800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   39.569555] cpufreq: pre change
<7>[   39.569899] cpufreq: post change
<7>[   39.569913] cpufreq: got 816000 kHz
<7>[   39.609645] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   39.609660] cpufreq: pre change
<7>[   39.610094] cpufreq: post change
<7>[   39.610116] cpufreq: got 408000 kHz
<7>[   39.969629] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   39.969659] cpufreq: pre change
<7>[   39.970001] cpufreq: post change
<7>[   39.970010] cpufreq: got 1008000 kHz
<7>[   40.089610] cpufreq: 475200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   40.089629] cpufreq: pre change
<7>[   40.090171] cpufreq: post change
<7>[   40.090187] cpufreq: got 816000 kHz
<7>[   40.169576] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   40.169601] cpufreq: pre change
<7>[   40.169948] cpufreq: post change
<7>[   40.169958] cpufreq: got 1008000 kHz
<7>[   40.929537] cpufreq: 417600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   40.929550] cpufreq: pre change
<7>[   40.929956] cpufreq: post change
<7>[   40.929970] cpufreq: got 816000 kHz
<7>[   40.969476] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   40.969490] cpufreq: pre change
<7>[   40.969879] cpufreq: post change
<7>[   40.969903] cpufreq: got 408000 kHz
<7>[   41.049608] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   41.049637] cpufreq: pre change
<7>[   41.049979] cpufreq: post change
<7>[   41.049988] cpufreq: got 1008000 kHz
<6>[   41.066568] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600
<7>[   41.169560] cpufreq: 460800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   41.169574] cpufreq: pre change
<7>[   41.169958] cpufreq: post change
<7>[   41.169972] cpufreq: got 816000 kHz
<7>[   41.373053] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   41.373079] cpufreq: pre change
<7>[   41.373413] cpufreq: post change
<7>[   41.373422] cpufreq: got 1008000 kHz
<7>[   41.649505] cpufreq: 504000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   41.649522] cpufreq: pre change
<7>[   41.649859] cpufreq: post change
<7>[   41.649872] cpufreq: got 816000 kHz
<7>[   41.769535] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   41.769556] cpufreq: pre change
<7>[   41.769929] cpufreq: post change
<7>[   41.769953] cpufreq: got 408000 kHz
<4>[   42.272647] gpu: change freq to 288, got 288
<7>[   42.409713] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   42.409751] cpufreq: pre change
<7>[   42.410455] cpufreq: post change
<7>[   42.410466] cpufreq: got 1008000 kHz
<7>[   42.449499] cpufreq: 806400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   42.449517] cpufreq: pre change
<7>[   42.449852] cpufreq: post change
<7>[   42.449866] cpufreq: got 816000 kHz
<7>[   42.489516] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   42.489531] cpufreq: pre change
<7>[   42.491006] cpufreq: post change
<7>[   42.491039] cpufreq: got 408000 kHz
<7>[   43.729589] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   43.729629] cpufreq: pre change
<7>[   43.729976] cpufreq: post change
<7>[   43.729986] cpufreq: got 1008000 kHz
<7>[   43.769507] cpufreq: 576000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   43.769525] cpufreq: pre change
<7>[   43.769867] cpufreq: post change
<7>[   43.769880] cpufreq: got 816000 kHz
<4>[   43.816792] gpu: change freq to 552, got 420
<7>[   43.849571] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   43.849594] cpufreq: pre change
<7>[   43.849930] cpufreq: post change
<7>[   43.849940] cpufreq: got 1008000 kHz
<3>[   43.917029] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   44.171021] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   44.769378] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   44.807347] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   44.840500] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   44.881666] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<7>[   45.219536] wlan0: no IPv6 routers present
<3>[   45.939927] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<3>[   45.960591] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<7>[   46.259476] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   46.259493] cpufreq: pre change
<7>[   46.259837] cpufreq: post change
<7>[   46.259860] cpufreq: got 408000 kHz
<7>[   46.479621] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   46.479656] cpufreq: pre change
<7>[   46.480000] cpufreq: post change
<7>[   46.480009] cpufreq: got 1008000 kHz
<7>[   46.849534] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   46.849547] cpufreq: pre change
<7>[   46.849891] cpufreq: post change
<7>[   46.849914] cpufreq: got 408000 kHz
<7>[   46.969613] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   46.969648] cpufreq: pre change
<7>[   46.969992] cpufreq: post change
<7>[   46.970001] cpufreq: got 1008000 kHz
<7>[   47.009552] cpufreq: 547200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   47.009567] cpufreq: pre change
<7>[   47.009902] cpufreq: post change
<7>[   47.009914] cpufreq: got 816000 kHz
<7>[   47.059490] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   47.059507] cpufreq: pre change
<7>[   47.059904] cpufreq: post change
<7>[   47.059928] cpufreq: got 408000 kHz
<7>[   47.249613] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   47.249650] cpufreq: pre change
<7>[   47.249994] cpufreq: post change
<7>[   47.250003] cpufreq: got 1008000 kHz
<7>[   47.339487] cpufreq: 518400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   47.339505] cpufreq: pre change
<7>[   47.339839] cpufreq: post change
<7>[   47.339853] cpufreq: got 816000 kHz
<7>[   47.389560] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   47.389581] cpufreq: pre change
<7>[   47.389925] cpufreq: post change
<7>[   47.389950] cpufreq: got 408000 kHz
<7>[   47.429629] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   47.429665] cpufreq: pre change
<7>[   47.430008] cpufreq: post change
<7>[   47.430018] cpufreq: got 1008000 kHz
<7>[   47.709559] cpufreq: 748800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   47.709577] cpufreq: pre change
<7>[   47.709944] cpufreq: post change
<7>[   47.709957] cpufreq: got 816000 kHz
<7>[   47.759485] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   47.759501] cpufreq: pre change
<7>[   47.759853] cpufreq: post change
<7>[   47.759875] cpufreq: got 408000 kHz
<7>[   48.059772] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   48.059810] cpufreq: pre change
<7>[   48.060153] cpufreq: post change
<7>[   48.060163] cpufreq: got 1008000 kHz
<3>[   48.659691] init: sys_prop: permission denied uid:10033  name:sys.ghwui.version
<6>[   48.793751] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600
<7>[   49.629532] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   49.629546] cpufreq: pre change
<7>[   49.629928] cpufreq: post change
<7>[   49.629952] cpufreq: got 408000 kHz
<7>[   50.059732] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   50.059769] cpufreq: pre change
<7>[   50.060122] cpufreq: post change
<7>[   50.060133] cpufreq: got 1008000 kHz
<7>[   50.180391] cpufreq: 619200 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   50.180408] cpufreq: pre change
<7>[   50.181221] cpufreq: post change
<7>[   50.181240] cpufreq: got 816000 kHz
<7>[   50.259592] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   50.259612] cpufreq: pre change
<7>[   50.259956] cpufreq: post change
<7>[   50.259979] cpufreq: got 408000 kHz
<7>[   50.379587] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   50.379621] cpufreq: pre change
<7>[   50.380134] cpufreq: post change
<7>[   50.380145] cpufreq: got 1008000 kHz
<7>[   50.459579] cpufreq: 417600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   50.459592] cpufreq: pre change
<7>[   50.459927] cpufreq: post change
<7>[   50.459940] cpufreq: got 816000 kHz
<7>[   50.499555] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   50.499579] cpufreq: pre change
<7>[   50.499921] cpufreq: post change
<7>[   50.499943] cpufreq: got 408000 kHz
<7>[   50.619602] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   50.619637] cpufreq: pre change
<7>[   50.619981] cpufreq: post change
<7>[   50.619990] cpufreq: got 1008000 kHz
<7>[   50.659569] cpufreq: 792000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   50.659583] cpufreq: pre change
<7>[   50.659917] cpufreq: post change
<7>[   50.659929] cpufreq: got 816000 kHz
<7>[   50.699561] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   50.699576] cpufreq: pre change
<7>[   50.700098] cpufreq: post change
<7>[   50.700125] cpufreq: got 408000 kHz
<7>[   51.239627] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   51.239664] cpufreq: pre change
<7>[   51.240007] cpufreq: post change
<7>[   51.240017] cpufreq: got 1008000 kHz
<7>[   51.689486] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   51.689503] cpufreq: pre change
<7>[   51.689847] cpufreq: post change
<7>[   51.689871] cpufreq: got 408000 kHz
<7>[   51.949643] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   51.949679] cpufreq: pre change
<7>[   51.950023] cpufreq: post change
<7>[   51.950032] cpufreq: got 1008000 kHz
<7>[   52.829496] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   52.829508] cpufreq: pre change
<7>[   52.829851] cpufreq: post change
<7>[   52.829873] cpufreq: got 408000 kHz
<7>[   53.399584] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   53.399743] cpufreq: pre change
<7>[   53.400231] cpufreq: post change
<7>[   53.400243] cpufreq: got 1008000 kHz
<7>[   53.439540] cpufreq: 777600 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   53.439571] cpufreq: pre change
<7>[   53.439965] cpufreq: post change
<7>[   53.439978] cpufreq: got 816000 kHz
<7>[   53.539494] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   53.539515] cpufreq: pre change
<7>[   53.539859] cpufreq: post change
<7>[   53.539883] cpufreq: got 408000 kHz
<7>[   53.779684] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   53.779721] cpufreq: pre change
<7>[   53.780064] cpufreq: post change
<7>[   53.780075] cpufreq: got 1008000 kHz
<7>[   54.059582] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   54.059600] cpufreq: pre change
<7>[   54.059944] cpufreq: post change
<7>[   54.059968] cpufreq: got 408000 kHz
<7>[   54.099613] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   54.099650] cpufreq: pre change
<7>[   54.099993] cpufreq: post change
<7>[   54.100003] cpufreq: got 1008000 kHz
<7>[   54.509497] cpufreq: 446400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   54.509516] cpufreq: pre change
<7>[   54.509869] cpufreq: post change
<7>[   54.509883] cpufreq: got 816000 kHz
<7>[   54.859539] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   54.859561] cpufreq: pre change
<7>[   54.859896] cpufreq: post change
<7>[   54.859906] cpufreq: got 1008000 kHz
<7>[   55.059538] cpufreq: 518400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   55.059552] cpufreq: pre change
<7>[   55.059890] cpufreq: post change
<7>[   55.059902] cpufreq: got 816000 kHz
<7>[   55.109474] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   55.109486] cpufreq: pre change
<7>[   55.109921] cpufreq: post change
<7>[   55.109943] cpufreq: got 408000 kHz
<4>[   55.916067] gpu: change freq to 288, got 288
<7>[   56.009678] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   56.009713] cpufreq: pre change
<7>[   56.010056] cpufreq: post change
<7>[   56.010066] cpufreq: got 1008000 kHz
<4>[   56.911568] gpu: change freq to 552, got 420
<7>[   57.049571] cpufreq: 518400 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   57.049584] cpufreq: pre change
<7>[   57.049964] cpufreq: post change
<7>[   57.049978] cpufreq: got 816000 kHz
<7>[   57.209561] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   57.209577] cpufreq: pre change
<7>[   57.209948] cpufreq: post change
<7>[   57.209971] cpufreq: got 408000 kHz
<6>[   57.391481] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600
<7>[   57.539752] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   57.539779] cpufreq: pre change
<7>[   57.540121] cpufreq: post change
<7>[   57.540130] cpufreq: got 1008000 kHz
<7>[   58.819542] cpufreq: 460800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   58.819560] cpufreq: pre change
<7>[   58.819897] cpufreq: post change
<7>[   58.819910] cpufreq: got 816000 kHz
<7>[   58.859603] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   58.859624] cpufreq: pre change
<7>[   58.859997] cpufreq: post change
<7>[   58.860017] cpufreq: got 1008000 kHz
<7>[   59.299561] cpufreq: 648000 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   59.299574] cpufreq: pre change
<7>[   59.299909] cpufreq: post change
<7>[   59.299922] cpufreq: got 816000 kHz
<7>[   59.419546] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   59.419561] cpufreq: pre change
<7>[   59.419906] cpufreq: post change
<7>[   59.419927] cpufreq: got 408000 kHz
<7>[   59.829621] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   59.829658] cpufreq: pre change
<7>[   59.830002] cpufreq: post change
<7>[   59.830011] cpufreq: got 1008000 kHz
<7>[   59.909577] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   59.909595] cpufreq: pre change
<7>[   59.909938] cpufreq: post change
<7>[   59.909962] cpufreq: got 408000 kHz
<7>[   59.989594] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   59.989631] cpufreq: pre change
<7>[   59.989974] cpufreq: post change
<7>[   59.989983] cpufreq: got 1008000 kHz
<7>[   60.039491] cpufreq: 604800 kHz r 0(L) selected 816000 kHz (1275000 uV)
<7>[   60.039513] cpufreq: pre change
<7>[   60.039942] cpufreq: post change
<7>[   60.039956] cpufreq: got 816000 kHz
<7>[   60.079515] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   60.079533] cpufreq: pre change
<7>[   60.079892] cpufreq: post change
<7>[   60.079916] cpufreq: got 408000 kHz
<7>[   60.329551] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   60.329689] cpufreq: pre change
<7>[   60.330046] cpufreq: post change
<7>[   60.330056] cpufreq: got 1008000 kHz
<4>[   60.333170] gpu: change freq to 288, got 288
<7>[   60.379475] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   60.379488] cpufreq: pre change
<7>[   60.379825] cpufreq: post change
<7>[   60.379847] cpufreq: got 408000 kHz
<7>[   60.629690] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   60.629718] cpufreq: pre change
<7>[   60.630059] cpufreq: post change
<7>[   60.630067] cpufreq: got 1008000 kHz
<7>[   60.669510] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   60.669522] cpufreq: pre change
<7>[   60.669936] cpufreq: post change
<7>[   60.669959] cpufreq: got 408000 kHz
<7>[   61.109690] cpufreq: 1008000 kHz r 1(H) selected 1008000 kHz (1275000 uV)
<7>[   61.109724] cpufreq: pre change
<7>[   61.110068] cpufreq: post change
<7>[   61.110078] cpufreq: got 1008000 kHz
<7>[   61.151659] cpufreq: 408000 kHz r 0(L) selected 408000 kHz (1275000 uV)
<7>[   61.151672] cpufreq: pre change
<7>[   61.152006] cpufreq: post change
<7>[   61.152028] cpufreq: got 408000 kHz

 

[Oma7144]

Och, das ist aber böse. Der Kernel initialisiert deinen Touch-Controller nicht.

<4>[    4.798174] FT5406 I2C TEST ERROR! 
<4>[    4.801652] ft5406_exit_platform_hw  

<4>[    5.021697] Install touch driver..the tp is nt11003,not touchplus tp_flag=0 
<4>[    5.359468] nt11003_init_platform_hw 
<6>[    5.363426] input: nt1103-ts as /devices/virtual/input/input4

Jetzt hätte ich gerne mal ein paar Meldungen von anderen Usern. Bitte!

 

[AXDIA-ODYS]

Hallo andreaslutsch,

das Update ist seit Mitte September Online. Bisher gab es keine Berichte dieser Art.
Auch nicht über unsere Hotline.
Bitte Poste mal die Seriennummer des Geräts (Rückseite).

PS Deine Support E-Mail ist mittlerweile auch bei mir angekommen.

 

[Oma7144]

Was gibt es denn hier Neues?