Loox rockt mit Jelly Bean!

[Oma7144]

Du hälst M fest, steckst das Netzteil an und dann das USB Kabel. Wenn dann immer noch 18D1;D001
gemeldet wird, dann deinstallierst du dass Gerät.

Anschließend von vorne und den Treiber aus dem Download-Packet (2207:290A) installieren.

 

[thecrow1304]

Tatsächlich...es lebt wieder. Danke erstmal für die Tips. Der Fehler war die Reihenfolge des Anschaltens und stecken der Kabel in Kombination mit der Reset-Taste.

-> M-Taste gedrückt halten
-> Power Kabel dran
-> Starten lassen
-> USB dran
-> USB connectet als RK-Device mit Ausrufezeichen (treiber wurde vorher installiert)
-> Resetknopf
-> Starten lassen
-> USB connectet als RK-Device und somit fürs RK-Tool greifbar.


Das System bootet nun, leider komme ich aber nur bis zum Entsperrbildschirm (Wüste mit Baum). Ich kann den Monitor nicht entsperren. Der Touchscreen reagiert nicht. Zusätzlich kommt eine Bildschirmeinblendung "Aktion durchführen mit: Nova Launcher | Trebuchet | Übersicht". Auch hier kann ich nichts ausführen.

Hab das Oma JB v.1.2.3a genommen und bin wie folgt vorgegangen:
RK-Tool -> EaraseIDB -> Hacken bei Loader rein -> Run!

 

[Oma7144]

ein Loox Plus

Da nimmst du jetzt Kernel und Modell Fix von hier ;-)

Den Kernel in den Ordner rockdev/Image kopieren und den Modell Fix nach dem fomat_NAND Fix ausführen.

 

[thecrow1304]

Es läuft. Danke.

 

[Oma7144]

Hier ist noch ein schicker OC-Kernel für den Loox-Plus.

Einfach mittels RK-Tool reinflashen (Haken bei Parameter und Kernel).

 

[motback]

Hallo habe auch ein Odys Loox gekauft,fertig gerootet mit CM10 OMA in Version 1.2.Meine Frage ist ob das die aktuelle Version ist?Über die Updatefunktion findet er nichts,bin der Meinung etwas von 1.3 gelesen zu haben:

 

[Oma7144]

Ja, ist aktuell. Thread ist hier: https://www.android-hilfe.de/forum/...598/loox-rockt-mit-cyanogenmod-10.326109.html

 

[MeisterWampe]

Hallo zusammen,

ich habe mir jetzt auch Oma JB 1.2.3a auf mein Loox Plus gemacht.
Hat auch an sich super geklappt, allerdings befindet sich Android jetzt die ganze Zeit im Trackball-Mode statt im Touch-Mode. Habe ich da etwas falsch gemacht oder kann man das irgendwo einfach umstellen?

Mein Vorgehen:
- Oma JB 1.2.3a geladen und entpackt
- 5-point touch kernel für Loox geladen und bei images reingeschoben
- NAND-fix und Loox Plus Fix auf SD-Karte kopiert
- Oma via RKAndroidTool aufs Pad (vorher EraseIDB, loader auch angeklickt)
- Beim Start erst NAND-fix, dann Loox Plus fix ausgeführt
- Neustart

An sich funktioniert eigentlich alles super-gummi-gut, bis auf die Tatsache, dass das Tablet eben unabänderbar im Trackball-Mode ist.

Kennt da vielleicht jemand eine Lösung?
Ich wäre für jeden Denkanstoß dankbar

 

[Oma7144]

Was steht denn in dem blauen Bootlogo? Loox oder Loox Plus?

 

[MeisterWampe]

Beim Bootlogo steht "Loox Plus". Ich hab jetzt auch mal testweise den im Thread verlinkten Kernel aufgeflasht, das hat aber auch nichts gebracht. Nachtrag: Hat sich herausgestellt, dass es gar nicht der Kernel aus dem Thread war, sondern der modifizierte Kernel vor dem 5-point touch.

Edit: Ein weiteres Problem habe ich noch entdeckt. Die Kamera steht auf dem Kopf. Sie ist nicht spiegelverkehrt, sondern steht auf dem Kopf. Wenn ich mir die Q&A so durchlese, habe ich das Gefühl, dass eventuell bei dem Loox Plus Fix irgendwas schief gegangen ist. Der Desktop ist allerdings richtig herum.

 

[Oma7144]

Ich habe das Gefühl, dass das gar kein Loox Plus ist. Probiere mal den Kernel vom Loox und den vom Next.

 

[MeisterWampe]

Mit dem Kernel vom Next gibts auf dem Display nur Datenschrott.
Mit dem Kernel vom Loox reagiert das Touchpad überhaupt nicht.

Mit dem Kernel vom Loox Plus wird das Touchpad angesprochen, verhält sich aber wie im Trackball-Modus.


Ich hab jetzt auch nochmal Oma 1.2.3a komplett neu geflasht, hat aber auch nichts gebracht :-/


Edit: Es lag am 5-point touch Kernel. Muss man da noch irgendwas nachinstallieren, damit das funktioniert? Mit dem alten Kernel funktioniert der Touchscreen.

 

[Oma7144]

Hm, beschreibe doch mal bitte den "Trackball-Modus".

 

[MeisterWampe]

Man hat einen Ring auf dem Display, welcher den Mauszeiger darstellt. Alle Fingerbewegungen auf dem Touchpad sind relative Bewegungen, die den Mauszeiger steuern. Ein Drücken irgendwo auf dem Touchpad ist ein Klick, zwei Finger und ziehen ist Klicken-und-Halten. Die Bedienung ähnelt ein wenig dem Trackpad beim Laptop.

Weitere Beschreibung:
Touch Mode | Android Developers


Ich verstehe irgendwie nicht, warum mit dem Kernel DIESEM man im Endeffekt nur einen Mauscursor hat, den man auch nur wie eine Maus relativ bewegen kann.

 

[ZuchiniMuffin]

Hat das noch wer, dass angry birds Spiele nachem update über google play nicht mehr rennen wollen? Musste mir wieder ältere Versionen installen, die gehen alle einwandfrei.

 

[MeisterWampe]

Ja, war bei mir auch so. Die neuesten Versionen wollen einfach nicht starten. Bad Piggies hingegen läuft problemlos.

Edit: Falscher Thread, oder?

 

[Oma7144]

Man hat einen Ring auf dem Display, welcher den Mauszeiger darstellt.

Ok, Fehlerbeschreibung (Ring) ist schon mal besser als Wertung (Trackball-Modus) ;-)

Dann versuchen wir mal, dem Ring den Gar auszumachen.

- obsolet -

 

[MeisterWampe]

Habs grad aufgespielt, aber leider keine Besserung.
Muss man für den Fix nochmal komplett neu flashen oder reicht es, wenn man es übers CWM installiert?

Scheinbar kann Android den Touchscreen sogar erkennen und ansprechen. Sonst würde Klicken-und-Ziehen mit zwei Fingern nicht gehen.

Ich kann frei zwischen Stock-Kernel und Custom-Kernel flashen. Bei stock funktioniert alles, bei custom kommt der Mausring.



Edit: Was vielleicht noch zur Problemlösung beitragen könnte ist folgendes

Dreht man das Tablet hochkant oder um 180 Grad, dreht sich die Richtung, in die sich der Mauszeiger bewegt nicht mit.
Beispiel: Normal bewegt er sich nach rechts, wenn man auf dem Touchscreen (irgendwo) mit dem Finger ansetzt und nach rechts zieht. Dreht man das Tablet hochkant, so dreht sich zwar der Desktop, aber der Cursor bewegt sich, wenn man nach rechts zieht, nach oben (oder unten, je nachdem wie rum man das Tablet gedreht hat)

 

[Oma7144]

Bitte Tab frisch booten, Terminal aufmachen, dmesg eingeben und das Log dann hier hochladen.

 

[MeisterWampe]

klogctl: Operation not permitted

:-/


Edit: Ok, mit "su" vorher gehts. Log kommt sofort.

127|u0_a79@android:/ $ su
u0_a79@android:/ # dmesg
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.8+ (erwin@nbesh) (gcc version 4.5.3 (Ubuntu/Linaro 4.5.3-12ubuntu2) ) #2 PREEMPT Sun Dec 9 21:16:54 CET 2012
<4>[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK29board
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0bb3000 to fef00000 - fef01ca0
<4>[    0.000000] CPU SRAM: copied sram data from c0bb4ca0 to fef03000 - fef031d8
<4>[    0.000000] clock: pll_wait_lock: wait pll bit 0x4000000 time out!
<6>[    0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/135/297/288/300/150/75/37/144/144/36 MHz (20110909)
<4>[    0.000000] DDR DEBUG: version 2.02 20111109
<4>[    0.000000] DDR DEBUG: DDR3 Device
<4>[    0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=512MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=480MHz
<4>[    0.000000] DDR DEBUG: CSR:0x0, RSLR0:0x9, RSLR1:0x0, RDGR0:0x5a, RDGR1:0x55
<7>[    0.000000] On node 0 totalpages: 90624
<7>[    0.000000] free_area_init_node: node 0, pgdat c0bb1d7c, node_mem_map c0000000
<7>[    0.000000]   DMA zone: 708 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 89916 pages, LIFO batch:15
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 89916
<5>[    0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x200000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000F0000@0x00018000(backup),0x0003a000@0x00108000(cache),0x004B0000@0x00142000(userdata),0x00002000@0x005F2000(kpanic),0x000E6000@0x005F4000(system),-@0x006DA000(user) bootver=2012-08-07#2.28 firmware_ver=2.0.0
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 354MB = 354MB total
<5>[    0.000000] Memory: 338460k/338460k available, 24036k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>[    0.000000]     vmalloc : 0xd6800000 - 0xfe800000   ( 640 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd6200000   ( 354 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc04a5000   ( 628 kB)
<5>[    0.000000]       .text : 0xc04a5000 - 0xc0b55f44   (6852 kB)
<5>[    0.000000]       .data : 0xc0b56000 - 0xc0bb2a40   ( 371 kB)
<5>[    0.000000]        .bss : 0xc0bb5024 - 0xc1640198   (10797 kB)
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:388
<4>[    0.000000] rk29_gpio_init: 224 gpio irqs in 7 banks
<6>[    0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.005381] Calibrating delay loop (skipped) preset value.. 299.83 BogoMIPS (lpj=1499184)
<6>[    0.014508] pid_max: default: 32768 minimum: 301
<6>[    0.020008] Mount-cache hash table entries: 512
<6>[    0.025704] Initializing cgroup subsys debug
<6>[    0.030505] Initializing cgroup subsys cpuacct
<6>[    0.035539] Initializing cgroup subsys freezer
<6>[    0.040568] CPU: Testing write buffer coherency: ok
<6>[    0.047066] devtmpfs: initialized
<6>[    0.060018] print_constraints: dummy:
<6>[    0.064612] NET: Registered protocol family 16
<4>[    0.069678] last_log: 0xd5c80000 0xc0bb6368
<6>[    0.119182] bio: create slab <bio-0> at 0
<6>[    0.124532] print_constraints: PWM2: 950 <--> 1400 mV at 1200 mV
<6>[    0.131468] pwm_regulator: driver initialized
<5>[    0.137444] SCSI subsystem initialized
<6>[    0.142150] usbcore: registered new interface driver usbfs
<6>[    0.148435] usbcore: registered new interface driver hub
<6>[    0.154610] usbcore: registered new device driver usb
<6>[    0.161059] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
<6>[    0.167323] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
<6>[    0.173817] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
<6>[    0.179990] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
<6>[    0.186248] rk29-adc rk29-adc: rk29 adc: driver initialized
<4>[    0.192671] rk29_adc_battery_probe--1265:
<4>[    0.197313] rk29_adc_battery_lowpower_check--1195:
<6>[    0.519346] rk29_adc_battery: driver initialized
<6>[    0.525376] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    0.533299] Bluetooth: Core ver 2.16
<6>[    0.537422] NET: Registered protocol family 31
<6>[    0.542438] Bluetooth: HCI device and connection manager initialized
<6>[    0.549527] Bluetooth: HCI socket layer initialized
<6>[    0.555000] Bluetooth: L2CAP socket layer initialized
<6>[    0.560679] Bluetooth: SCO socket layer initialized
<4>[    0.566527] rk29_tps65910_config: tps65910 init config.
<6>[    0.574871] TPS65910 Set default voltage.
<6>[    0.581447] Switching to clocksource timer3
<6>[    0.591789] Switched to NOHz mode on CPU #0
<4>[    0.655599]  rk29fb_probe ok
<6>[    0.672379] NET: Registered protocol family 2
<6>[    0.677587] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.686002] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    0.694780] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.702477] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    0.709774] TCP reno registered
<6>[    0.713330] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.719895] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.727366] NET: Registered protocol family 1
<6>[    0.732846] RPC: Registered named UNIX socket transport module.
<6>[    0.739539] RPC: Registered udp transport module.
<6>[    0.744812] RPC: Registered tcp transport module.
<6>[    0.750106] RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>[    0.757693] RK29 Backlight Driver Initialized.
<6>[    0.763112] Unpacking initramfs...
<6>[    1.086155] Freeing initrd memory: 2048K
<6>[    1.090804] PMU: registered new PMU device of type 0
<6>[    1.096925] Loaded driver for PL330 DMAC-0 rk29-pl330
<6>[    1.102584]       DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
<6>[    1.109566] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[    1.115222]       DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
<4>[    1.127029] vpu_mem: 62 initialized
<4>[    1.131135] vpu: power on
<6>[    1.154253] VPU_SERVICE: HW ID = 0x67311148
<6>[    1.159106] VPU_SERVICE: Compatible HW found at 0x10104200
<6>[    1.165252] VPU_SERVICE: HW ID = 0x82701110
<6>[    1.170337] VPU_SERVICE: Compatible HW found at 0x10104000
<4>[    1.176692] vpu: power off...done
<6>[    1.200448] VPU_SERVICE: init success
<6>[    1.204596] bt shut off power
<4>[    1.228080] ret=0x0
<6>[    1.238671] ashmem: initialized
<6>[    1.242952] fuse init (API version 7.16)
<6>[    1.248333] io scheduler noop registered
<6>[    1.252759] io scheduler cfq registered (default)
<6>[    1.258381] rk29_serial.1: ttyS1 at MMIO 0x20060000 (irq = 67) is a rk29_serial.1
<6>[    1.266745] rk29_serial rk29_serial.1: baud:115200
<4>[    1.272092] serial.1 timeout:1000000
<6>[    1.276115] console [ttyS1] enabled, bootconsole disabled
<6>[    1.306212] rk29_serial rk29_serial.1: membase 0xd6816000
<6>[    1.311631] rk29_serial.0: ttyS0 at MMIO 0x20030000 (irq = 66) is a rk29_serial.0
<6>[    1.336255] rk29_serial rk29_serial.0: membase 0xd681e000
<6>[    1.341759] rk29_serial.2: ttyS2 at MMIO 0x20064000 (irq = 68) is a rk29_serial.2
<6>[    1.366233] rk29_serial rk29_serial.2: membase 0xd6826000
<6>[    1.375486] loop: module loaded
<6>[    1.378800] pmem_cam: 1 init
<6>[    1.382446] pmem: 1 init
<6>[    1.386651] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.393823] PPP generic driver version 2.4.2
<6>[    1.398362] PPP Deflate Compression module registered
<6>[    1.403426] PPP BSD Compression module registered
<6>[    1.409225] PPP MPPE Compression module registered
<6>[    1.414026] NET: Registered protocol family 24
<6>[    1.418636] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.423694] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>[    1.430412] Rockchip WiFi SYS interface (V1.00) ...
<6>[    1.435519] Initializing USB Mass Storage driver...
<6>[    1.440476] usbcore: registered new interface driver usb-storage
<6>[    1.446493] USB Mass Storage support registered.
<6>[    1.451192] usbcore: registered new interface driver usbserial
<6>[    1.457065] USB Serial support registered for generic
<6>[    1.462144] usbcore: registered new interface driver usbserial_generic
<6>[    1.468695] usbserial: USB Serial Driver core
<6>[    1.473076] USB Serial support registered for cp210x
<6>[    1.478081] usbcore: registered new interface driver cp210x
<6>[    1.483646] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
<6>[    1.490463] USB Serial support registered for DeLorme Earthmate USB
<6>[    1.496755] USB Serial support registered for HID->COM RS232 Adapter
<6>[    1.503128] USB Serial support registered for Nokia CA-42 V2 Adapter
<6>[    1.509541] usbcore: registered new interface driver cypress
<6>[    1.515194] cypress_m8: v1.10:Cypress USB to Serial Driver
<6>[    1.520712] USB Serial support registered for FTDI USB Serial Device
<6>[    1.527108] usbcore: registered new interface driver ftdi_sio
<6>[    1.532847] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
<6>[    1.538710] USB Serial support registered for GSM modem (1-port)
<6>[    1.544745] usbcore: registered new interface driver option
<6>[    1.550333] option: v0.7.2:USB Driver for GSM modems
<6>[    1.555319] USB Serial support registered for pl2303
<6>[    1.560330] usbcore: registered new interface driver pl2303
<6>[    1.565895] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[    1.571994] DWC_OTG: dwc_otg_driver_probe otg2.0 reg addr: 0x10180000 remap:0xd6880000
<6>[    1.790225] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[    1.795092] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xd6900000
<6>[    2.013319] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    2.017950] usb20_host usb20_host: DWC OTG Controller
<6>[    2.023118] usb20_host usb20_host: new USB bus registered, assigned bus number 1
<6>[    2.030554] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[    2.036330] DWC_OTG: Init: Port Power? op_state=1
<6>[    2.041027] DWC_OTG: Init: Power Port (0)
<6>[    2.045088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.051886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.059109] usb usb1: Product: DWC OTG Controller
<6>[    2.063810] usb usb1: Manufacturer: Linux 3.0.8+ host20_hcd
<6>[    2.069396] usb usb1: SerialNumber: usb20_host
<6>[    2.074153] hub 1-0:1.0: USB hub found
<6>[    2.077933] hub 1-0:1.0: 1 port detected
<6>[    2.082105] DWC_OTG: host11_driver_probe host1.1 reg addr: 0x10140000 remap:0xd6980000
<6>[    2.300358] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    2.304978] usb11_host usb11_host: DWC OTG Controller
<6>[    2.310159] usb11_host usb11_host: new USB bus registered, assigned bus number 2
<6>[    2.317580] usb11_host usb11_host: irq 50, io mem 0x00000000
<6>[    2.323246] DWC_OTG: Init: Port Power? op_state=1
<6>[    2.327942] DWC_OTG: Init: Power Port (0)
<6>[    2.331987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    2.338779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    2.345993] usb usb2: Product: DWC OTG Controller
<6>[    2.350713] usb usb2: Manufacturer: Linux 3.0.8+ host11_hcd
<6>[    2.356289] usb usb2: SerialNumber: usb11_host
<6>[    2.360997] hub 2-0:1.0: USB hub found
<6>[    2.364749] hub 2-0:1.0: 1 port detected
<6>[    2.369726] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    2.376627] android_usb gadget: Number of LUNs=1
<6>[    2.381240]  lun0: LUN: removable file: (no medium)
<6>[    2.386268] android_usb gadget: android_usb ready
<6>[    2.391179] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<6>[    2.398447] usbcore: registered new interface driver xpad
<4>[    2.403843] gt801_ts_init
<4>[    2.406546] gt801_init_platform_hw
<6>[    2.620945] input: gt801-touchscreen as /devices/platform/rk29_i2c.2/i2c-2/2-0055/input/input1
<6>[    2.629742] gt801_ts_probe: Start touchscreen gt801-touchscreen in interrupt mode
<6>[    2.637424] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-004c/input/input2
<4>[    2.645393] i2c-core: driver [mma7660] using legacy suspend method
<4>[    2.651597] i2c-core: driver [mma7660] using legacy resume method
<6>[    2.664746] using rtc device, tps65910_rtc, for alarms
<6>[    2.669769] tps65910_rtc tps65910_rtc: rtc core: registered tps65910_rtc as rtc0
<6>[    2.677364] TPS65910 RTC device successfully registered
<6>[    2.686770] Linux video capture interface: v2.00
<6>[    2.691605] device-mapper: uevent: version 1.0.3
<6>[    2.696405] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[    2.704908] Bluetooth: HCI UART driver ver 2.2
<6>[    2.709368] Bluetooth: HCI H4 protocol initialized
<6>[    2.714154] Bluetooth: HCI BCSP protocol initialized
<6>[    2.719122] Bluetooth: HCILL protocol initialized
<6>[    2.723821] Bluetooth: HCIATH3K protocol initialized
<6>[    2.728788] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
<6>[    2.734924] usbcore: registered new interface driver bcm203x
<6>[    2.740604] Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>[    2.746228] usbcore: registered new interface driver btusb
<6>[    2.756223] usb 2-1: new full speed USB device number 2 using usb11_host
<6>[    2.762927] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<4>[    2.824051] rk29_sdmmc_change_clk_div..1664..  newDiv=80, newCLK=300Khz====xbw[sd_mmc]=====
<4>[    2.842595] .Line3353..The End of SDMMC-probe Ver.2.14 The last modify date is 2011-11-17,modifyed by XBW. ===xbw[sd_mmc]===
<4>[    2.842602]
<4>[    2.855374] rk29_sdmmc_change_clk_div..1664..  newDiv=40, newCLK=300Khz====xbw[sdio]=====
<4>[    2.863683] .Line3353..The End of SDMMC-probe Ver.2.14 The last modify date is 2011-11-17,modifyed by XBW. ===xbw[sdio]===
<4>[    2.863691]
<6>[    2.880695] usbcore: registered new interface driver usbhid
<6>[    2.886295] usbhid: USB HID core driver
<4>[    2.890136]
<4>[    2.890139] mmc_attach_sd..1216..  ===== Begin to identify card as SD-card ===xbw[mmc0]===
<6>[    2.900167] logger: created 256K log 'log_main'
<6>[    2.904750] logger: created 256K log 'log_events'
<6>[    2.910560] logger: created 256K log 'log_radio'
<6>[    2.917293] logger: created 256K log 'log_system'
<4>[    2.922120] ---- gpu regbase: 0xd6850000 ----
<4>[    2.957135] -----> dma_alloc_writecombine 1 pages!
<4>[    2.961937] -----> dma_alloc_writecombine 1 pages!
<4>[    2.966778] -----> dma_alloc_writecombine 128 pages!
<4>[    2.972633] -----> dma_alloc_writecombine 1 pages!
<4>[    2.989091] rt5621_i2c_probe
<4>[    2.991998] rk29_sdmmc_change_clk_div..1664..  newDiv=1, newCLK=24000Khz====xbw[sd_mmc]=====
<6>[    3.000464] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[    3.005700] mmc0: new SDHC card at address aaaa
<6>[    3.010512] mmcblk0: mmc0:aaaa SU32G 29.7 GiB
<6>[    3.015404] usb 2-1: not running at top speed; connect to a high speed hub
<4>[    3.023795]
<4>[    3.023797] msdos_partition..461... ==== Begin to parse sdcard-partition.  ====xbw[mmc0]===
<4>[    3.033705] msdos_partition..530... ==== The sdcard has MBR. ====xbw[mmc0]===
<4>[    3.040879] msdos_partition..543... ==== partition-1, size=31162880KB  ====xbw[mmc0]===
<4>[    3.048918] msdos_partition..571... ==== main partition-1....====xbw[mmc0]===
<6>[    3.056071]  mmcblk0: p1
<4>[    3.059126] Init SDCARD mmc0 OK
<4>[    3.062303]
<4>[    3.062306] =================
<4>[    3.062308] mmc_rescan..1809..  ====find no SDMMC host.====xbw[mmc1]=====
<6>[    3.074783] usb 2-1: New USB device found, idVendor=0bda, idProduct=8176
<6>[    3.081506] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    3.088655] usb 2-1: Product: 802.11n WLAN Adapter
<6>[    3.093449] usb 2-1: Manufacturer: Realtek
<6>[    3.097569] usb 2-1: SerialNumber: 00e04c000001
<6>[    3.429228] asoc: RT5621 HiFi <-> rk29_i2s.0 mapping ok
<4>[    3.436794] rt5633_i2c_probe
<6>[    3.439906] rk29_i2c rk29_i2c.0: addr: 0x1c receive no ack
<3>[    3.445504] rk29_i2c rk29_i2c.0: i2c transfer err, client address is 0x1c [20110106]
<4>[    3.453337] rk29_rt5633_detect_device: read RT5633_VENDOR_ID1 err!
<4>[    3.459591] rt5633_i2c_probe: detect alc5633 error!
<6>[    3.464628] ALSA device list:
<6>[    3.467672]   #0: RK29_RT5621
<6>[    3.470921] GACT probability NOT on
<6>[    3.474446] Mirror/redirect action on
<6>[    3.478298] u32 classifier
<6>[    3.481025]     Actions configured
<6>[    3.484462] Netfilter messages via NETLINK v0.30.
<6>[    3.489635] nf_conntrack version 0.5.0 (5320 buckets, 21280 max)
<6>[    3.495876] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.501253] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    3.508219] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.514264] xt_time: kernel timezone is -0000
<6>[    3.518800] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.524233] arp_tables: (C) 2002 David S. Miller
<6>[    3.528928] TCP cubic registered
<6>[    3.532240] NET: Registered protocol family 10
<6>[    3.537169] Mobile IPv6
<6>[    3.539643] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.545144] IPv6 over IPv4 tunneling driver
<6>[    3.549915] NET: Registered protocol family 17
<6>[    3.554377] NET: Registered protocol family 15
<5>[    3.558885] Bridge firewalling registered
<6>[    3.563000] Bluetooth: RFCOMM TTY layer initialized
<6>[    3.567955] Bluetooth: RFCOMM socket layer initialized
<6>[    3.573086] Bluetooth: RFCOMM ver 1.11
<6>[    3.576844] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    3.582152] Bluetooth: BNEP filters: protocol multicast
<6>[    3.587381] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.593430] NET: Registered protocol family 35
<5>[    3.597935] Registering the dns_resolver key type
<3>[    3.602784] RK29 Camera driver version: v0.1.7
<6>[    3.607488] camera 33-0: Probing 33-0
<6>[    3.786735] camera 33-1: Probing 33-1
<6>[    3.793125] rk29_i2c rk29_i2c.1: addr: 0x30 receive no ack
<3>[    3.798760] rk29_i2c rk29_i2c.1: i2c transfer err, client address is 0x30 [20110106]
<3>[    3.806561]
<3>[    3.806567]  ov2655 write reg(0x3012, val:0x80) failed, try to write again!
<6>[    3.815175] rk29_i2c rk29_i2c.1: addr: 0x30 receive no ack
<3>[    3.820768] rk29_i2c rk29_i2c.1: i2c transfer err, client address is 0x30 [20110106]
<3>[    3.828542]
<3>[    3.828547]  ov2655 write reg(0x3012, val:0x80) failed, try to write again!
<6>[    3.837230] rk29_i2c rk29_i2c.1: addr: 0x30 receive no ack
<3>[    3.842796] rk29_i2c rk29_i2c.1: i2c transfer err, client address is 0x30 [20110106]
<3>[    3.850909]
<3>[    3.850912]  ov2655 write reg(0x3012, val:0x80) failed, try to write again!
<3>[    3.859368] soft reset ov2655 failed
<4>[    3.863143] ipp irq 46
<6>[    3.865639] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>[    3.873322] ThumbEE CPU extension supported.
<6>[    3.882354] tps65910_rtc tps65910_rtc: setting system clock to 2012-12-20 12:25:17 UTC (1356006317)
<6>[    3.891628] rk29_serial rk29_serial.1: baud:115200
<4>[    3.896431] serial.1 timeout:1000000
<6>[    3.900120] Freeing init memory: 628K
<4>[    3.906944] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[    3.956883] init: could not open /dev/keychord
<6>[    3.961506] rk29_serial rk29_serial.1: baud:115200
<4>[    3.966317] serial.1 timeout:1000000
<3>[    3.970061] init: cannot open '/initlogo.rle'
<4>[    4.008103] rk29xxnand_ko: module license '' taints kernel.
<4>[    4.013682] Disabling lock debugging due to kernel taint
<4>[    4.029865] gp_rknand_info = : 0xd5555740
<4>[    4.034319] FlashCopyProgBuf1=0xc14dc000
<4>[    4.038707] ATime: 40 ns AHB: 144 timming: 1081
<4>[    4.043257] No.1 FLASH INFO:2c 68 4 4a a9
<4>[    4.047716] ATime: 32 ns AHB: 144 timming: 1061
<4>[    4.052761] ATime: 32 ns AHB: 144 timming: 1061
<4>[    4.057299] randomizer = 0 , EccBits = 18
<4>[    4.075094] GetRemapTbl...done
<4>[    5.493428] FTL INFO:Version = 438,Date = 20120806
<4>[    5.498225] totalLogicBlkRaw  = 1903
<4>[    5.501811] gBootMedia = 0 gSdmmcFwPartOffset =0!
<5>[    5.506734] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[    5.513083] Creating 10 MTD partitions on "rk29xxnand":
<5>[    5.518340] 0x000000400000-0x000000800000 : "misc"
<5>[    5.524309] 0x000000800000-0x000001000000 : "kernel"
<5>[    5.530104] 0x000001000000-0x000002000000 : "boot"
<5>[    5.535696] 0x000002000000-0x000003000000 : "recovery"
<5>[    5.541663] 0x000003000000-0x000021000000 : "backup"
<5>[    5.547921] 0x000021000000-0x000028400000 : "cache"
<5>[    5.553697] 0x000028400000-0x0000be400000 : "userdata"
<5>[    5.562025] 0x0000be400000-0x0000be800000 : "kpanic"
<6>[    5.567998] apanic: Bound to mtd partition 'kpanic'
<6>[    5.572871] apanic: No panic data available
<5>[    5.577217] 0x0000be800000-0x0000db400000 : "system"
<5>[    5.583469] 0x0000db400000-0x0000ede00000 : "user"
<4>[    5.589371] startBlk = 277  sysProtAddr = 276
<6>[    5.614119] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: (null)
<6>[    6.005647] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: (null)
<6>[    6.037025] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: (null)
<3>[    6.154430] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<4>[    6.258563] ------------[ cut here ]------------
<4>[    6.263200] WARNING: at fs/proc/generic.c:586 proc_register+0x110/0x214()
<4>[    6.270030] proc_dir_entry '/proc/vpu_mem' already registered
<4>[    6.275800] [<c04af578>] (unwind_backtrace+0x0/0xf8) from [<c04cd500>] (warn_slowpath_common+0x54/0x64)
<4>[    6.285210] [<c04cd500>] (warn_slowpath_common+0x54/0x64) from [<c04cd5a4>] (warn_slowpath_fmt+0x30/0x40)
<4>[    6.294794] [<c04cd5a4>] (warn_slowpath_fmt+0x30/0x40) from [<c0584a6c>] (proc_register+0x110/0x214)
<4>[    6.303934] [<c0584a6c>] (proc_register+0x110/0x214) from [<c0584be0>] (proc_create_data+0x70/0xbc)
<4>[    6.312995] [<c0584be0>] (proc_create_data+0x70/0xbc) from [<bf0e7020>] (vpu_mem_init+0x20/0x3c [vpu_mem])
<4>[    6.322665] [<bf0e7020>] (vpu_mem_init+0x20/0x3c [vpu_mem]) from [<c04a5474>] (do_one_initcall+0x34/0x174)
<4>[    6.332327] [<c04a5474>] (do_one_initcall+0x34/0x174) from [<c04fc7f0>] (sys_init_module+0xf0/0x18d8)
<4>[    6.341558] [<c04fc7f0>] (sys_init_module+0xf0/0x18d8) from [<c04aae00>] (ret_fast_syscall+0x0/0x30)
<4>[    6.350691] ---[ end trace 5b27da277d284365 ]---
<3>[    6.365813] Error: Driver 'vpu_mem' is already registered, aborting...
<4>[    6.597992] vpu_service: Unknown symbol pmu_set_power_domain (err 0)
<4>[    6.604395] vpu_service: Unknown symbol cru_set_soft_reset (err 0)
<4>[    6.750895] .335.. MMC0 receive the message sd-No-Media from VOLD.====xbw[sd_mmc]====
<4>[    6.758766] .360.. MMC0 receive the message No-Media from VOLD. waitTimes=0 ====xbw[sd_mmc]====
<4>[    6.772112] Current WiFi chip is RTL8188.
<4>[    6.783272] galcore: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    6.800962] galcore: Unknown symbol pmu_set_power_domain (err 0)
<4>[    6.828844] .335.. MMC0 receive the message sd-Idle-Unmounted from VOLD.====xbw[sd_mmc]====
<4>[    6.859946] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    6.921215] rk29_ipp: Unknown symbol ipp_blit_sync (err 0)
<6>[    6.935044] rk29_serial rk29_serial.0: baud:9600
<4>[    6.944913] serial.0 timeout:1000000
<6>[    6.954750] rk29_serial rk29_serial.2: baud:9600
<4>[    6.959386] serial.2 timeout:1000000
<6>[    6.968297] rk29_serial rk29_serial.2: baud:9600
<4>[    6.972911] serial.2 timeout:1000000
<6>[    6.983710] rk29_serial rk29_serial.0: baud:9600
<4>[    6.995029] serial.0 timeout:1000000
<3>[    7.004785] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<3>[    7.023743] android_usb: already disabled
<6>[    7.032831] rk29_serial rk29_serial.1: baud:115200
<6>[    7.038844] mtp_bind_config
<4>[    7.045863] serial.1 timeout:1000000
<6>[    7.049440] DWC_OTG: USB SUSPEND
<3>[    8.189311] ov7675 sensor_ioctl cmd(0x3) is unknown !
<3>[    8.954087] init: sys_prop: permission denied uid:1003  name:sys.gvglk.version
<3>[    8.971814] init: sys_prop: permission denied uid:1003  name:sys.gvglu.version
<4>[    9.789156] gpu: change freq to 552, got 480
<6>[   17.836250] DWC_OTG: ********vbus detect*********************************************
<6>[   18.212221] DWC_OTG: ********soft connect!!!*****************************************
<6>[   18.220063] DWC_OTG: USB SUSPEND
<6>[   18.362212] DWC_OTG: USB RESET
<6>[   18.400646] android_work: sent uevent USB_STATE=CONNECTED
<6>[   18.406053] DWC_OTG: USB RESET
<6>[   18.653601] android_usb gadget: high speed config #1: android
<6>[   18.659511] android_work: sent uevent USB_STATE=CONFIGURED
<6>[   19.244839] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<3>[   20.034038] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
<4>[   20.238765] BAT: status = 1, capacity = 87, new_capacity = 87, old_capacity = 84
<4>[   25.540656] [ZWP]mma7660_set_rate,rate = 32
<4>[   25.550477] [ZWP]mma7660_set_rate,rate = 6
<4>[   25.561471] [ZWP]mma7660_set_rate,rate = 4
<6>[   25.605244] bt turn on power
<4>[   25.884294] Current WiFi chip is RTL8188.
<4>[   25.898207] =======================================================
<4>[   25.904477] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[   25.926273] =======================================================
<4>[   25.932551] RTL8192/RTL8188 USB WiFi driver (Powered by Rockchip,Ver 3.27) init.
<4>[   25.956303] Request GPIO for WIFI POWER error!
<6>[   26.094879] acc_open
<6>[   26.097437] acc_release
<6>[   26.191746] DWC_OTG: USB SUSPEND
<6>[   26.239719] DWC_OTG: ********session end intr,soft disconnect************************
<6>[   26.247583] DWC_OTG: USB RESET
<6>[   26.250769] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   26.472451] rk29_serial rk29_serial.2: baud:9600
<4>[   26.483013] serial.2 timeout:1000000
<6>[   26.501619] rk29_serial rk29_serial.2: baud:9600
<4>[   26.517296] serial.2 timeout:1000000
<6>[   26.531272] rk29_serial rk29_serial.2: baud:115200
<4>[   26.547767] serial.2 timeout:1000000
<4>[   27.364620] gpu: change freq to 288, got 288
<6>[   28.476459] usbcore: registered new interface driver rtl8192cu
<4>[   28.900425] +871x_drv - dev_open
<4>[   30.979659] MAC Address = 00:4b:46:45:97:7d
<6>[   31.021670] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[   31.030078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   31.374733] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<6>[   31.865799] mtp_open
<3>[   33.081617] init: sys_prop: permission denied uid:10061  name:sys.gvglk.version
<3>[   33.081773] init: sys_prop: permission denied uid:10061  name:sys.gvglu.version
<6>[   33.370519] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[   33.566554] DWC_OTG: dwc_otg_hcd_qh_init tt->hub null!
<4>[   33.862717] gpu: change freq to 552, got 480
<4>[   34.111104] .335.. MMC0 receive the message sd-Checking from VOLD.====xbw[sd_mmc]====
<4>[   34.128647] .335.. MMC0 receive the message sd-Mounted from VOLD.====xbw[sd_mmc]====
<6>[   36.412945] bt shouldn't shut off power, wifi is using it!
<7>[   43.756237] wlan0: no IPv6 routers present
<4>[   72.717696] gpu: change freq to 288, got 288
<4>[   72.766471] gpu: change freq to 552, got 480
<3>[   73.911722] init: sys_prop: permission denied uid:10035  name:sys.gvglk.version
<3>[   73.928290] init: sys_prop: permission denied uid:10035  name:sys.gvglu.version
<6>[   77.525137] binder: 1235:1241 refcount change on invalid ref 18
<4>[  102.555797] gpu: change freq to 288, got 288
<4>[  104.761833] gpu: change freq to 552, got 480
<4>[  108.610461] gpu: change freq to 288, got 288
<4>[  109.792339] gpu: change freq to 552, got 480
<4>[  121.429030] gpu: change freq to 288, got 288
<4>[  123.245341] gpu: change freq to 552, got 480
<4>[  133.940883] gpu: change freq to 288, got 288
<4>[  137.081766] gpu: change freq to 552, got 480
<4>[  160.016338] gpu: change freq to 288, got 288
<4>[  168.254000] gpu: change freq to 552, got 480
<4>[  172.098226] gpu: change freq to 288, got 288
<4>[  174.516050] gpu: change freq to 552, got 480
<4>[  178.139323] gpu: change freq to 288, got 288
<4>[  178.857081] gpu: change freq to 552, got 480
<3>[  201.497117] init: sys_prop: permission denied uid:10034  name:sys.gvglk.version
<3>[  201.497272] init: sys_prop: permission denied uid:10034  name:sys.gvglu.version
u0_a79@android:/ #