G
germanytwo
Erfahrenes Mitglied
- 9
Hi leute,
kleines Problem.
Da ein Freund Probleme mit Froyo von Quarx hatte, wollte ich ihm die 2.1 wieder flashen, zuerst hab ichs mit clockwork recovery probiert, da kam aber irgendwas mit md5 not found oder so....
Jedenfalls hatte ich es dann normal geflasht mit updater und so.
Als er dann fertig war, blieb er immer bei dem ANDROID-bootlogo stehen.
Dann entschied ich mich für den Rettungsflash, also starten des phones in downloadmodus.
Als er fertig mit flashen war, blieb er beim LG-Logo schon stehen.
Ich habs jetzt ein paar mal probiert, mit Rettungsflash, aber es läuft immer aufs selbe hinaus.
Hier mal die Flash Log:
[17:22:56:748] : =============================================
[17:22:56:748] : Log is started on 24.01.2011, at 17:22:56:748,
executable: C:\Users\Simon\Desktop\lg\KDZ_FW_UPD.exe (ProcID: 0x0000120c),
compile time : Sep 8 2010 17:19:53
[17:22:56:748] : Version :
[17:22:56:750] : strFilename1 = eur
[17:22:56:750] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz, m_nSelectedImages= 70787108
[17:23:06:540] : Start Web Downloading
[17:23:06:540] : Get Usb Port
[17:23:06:544] : rsi.strFriendlyName=Kommunikationsanschluss (COM1)
[17:23:06:544] : Remove Kommunikationsanschluss (COM1)
[17:23:06:544] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM8)
[17:23:06:544] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[17:23:06:544] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM8
[17:23:06:544] : Port = COM8
[17:23:06:545] : Clear
[17:23:06:545] : Clear
[17:23:06:556] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:556] : Clear
[17:23:06:557] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:557] : Clear
[17:23:06:558] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:558] : >> DIAG_STATUS_F FAILED
[17:23:06:563] : >>Get Model Name [DIAG_VERNO_F]
[17:23:06:563] : Clear
[17:23:06:564] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:564] : Clear
[17:23:06:565] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:565] : Clear
[17:23:06:566] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:566] : Clear
[17:23:06:567] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:567] : Clear
[17:23:06:568] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:568] : Clear
[17:23:06:569] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:569] : FAIL (No Phone)
[17:23:06:569] : GetModelName() Operation Failed Check Diag CMD
[17:23:06:569] : EMERGENCY Booting Mode
[17:23:06:569] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[17:23:06:569] : Clear
[17:23:06:569] : Clear
[17:23:06:570] : BS/GT540/7Data\LGMOBILEAX\Phone\europen
[17:23:06:570] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - GT540
[17:23:06:570] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[17:23:06:570] : Clear
[17:23:06:570] : Clear
[17:23:06:571] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:571] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:571] : Clear
[17:23:06:572] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:572] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:572] : Clear
[17:23:06:573] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:573] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:573] : FAIL
[17:23:06:573] : Phone_Diag_Status = FALSE
[17:23:06:573] : Clear
[17:23:06:573] : Clear
[17:23:06:584] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:584] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:584] : Clear
[17:23:06:585] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:585] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:585] : Clear
[17:23:06:586] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:586] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:586] : NV Write Fail : NV ITEM 9028(9028)
[17:23:06:686] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[17:23:06:686] : >> GET DLOAD COMM MODE
[17:23:06:686] : Clear
[17:23:06:686] : Clear
[17:23:06:687] : [GetCommMode] Communication mode : 2
[17:23:06:687] : Pre Nand Download
[17:23:06:687] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[17:23:06:687] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[17:23:06:687] : Clear
[17:23:06:687] : Clear
[17:23:06:688] : [COM8] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[17:23:06:688] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[17:23:06:688] : NandFlashInitWithFile ::
[17:23:06:688] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[17:23:06:688] : Clear
[17:23:06:688] : Clear
[17:23:06:699] : Clear
[17:23:06:699] : Clear
[17:23:06:700] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[17:23:06:700] : m_nSelectedImages= 70787108,Type= 3
[17:23:06:700] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[17:23:06:700] : [COM8] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[17:23:06:700] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[17:23:06:700] : NandFlashInitWithFile ::
[17:23:06:701] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[17:23:06:701] : Clear
[17:23:06:701] : Clear
[17:23:06:712] : >> AMSS FLASHING ...
[17:23:06:713] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[17:23:06:713] : Sending Pkt Seq : 0
[17:23:06:713] : Clear
[17:23:06:713] : Sending Pkt Seq : 1
jetzt sendet er alle pakete (waren echt viel)
[17:25:50:355] : Sending Pkt Seq : 114438
[17:25:50:355] : Tx packet : Last packet sequence : 114439
[17:25:50:355] : Sending Pkt Seq : 114439
[17:25:50:376] : _Reset_N_Close bFirst = 1
[17:25:50:376] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[17:25:50:376] : [COM8] Reset [DLOAD]
[17:25:50:376] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - RESET
[17:25:50:676] : Clear
[17:25:50:676] : Clear
[17:25:50:676] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[17:25:50:976] : Clear
[17:25:50:976] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[17:25:50:976] : Close Port<<
[17:27:30:977] : Clear
[17:27:30:977] : Clear
[17:27:30:977] : Clear
[17:27:30:978] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:978] : Clear
[17:27:30:979] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:979] : Clear
[17:27:30:990] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:990] : >> DIAG_STATUS_F FAILED
[17:27:30:995] : >>Get Model Name [DIAG_VERNO_F]
[17:27:30:995] : Clear
[17:27:30:996] : strModel = GT540
[17:27:30:996] : Read NV item: 71 NV ITEM 71 [71]
[17:27:30:996] : Clear
[17:27:30:997] : CSW
[17:27:30:997] : Banner : CSW
[17:27:30:997] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - GT540
[17:27:30:997] : Clear
[17:27:31:008] : Write NV item:9028 NV ITEM 9028
[17:27:31:008] : 9028 - NV_DONE_S Item
[17:27:31:008] : Clear
[17:27:31:008] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[17:27:31:008] : Close Port<<
[17:27:31:008] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_OK
[17:27:33:055] : Log finished
es kommt ja ein paar mal error in dlmode (warscheinlich downloadmode)
danke im Vorraus
Okey jetzt sind wir wieder so weit, dass er beim ANDROID logo nicht weiterbootet.
Soll ichs vielleicht einfach mal ne viertel stunde rumbooten lassen?
Bei mir hats meistens nach dem flashen immer so 2-5 minuten gedauert...
Garantie wäre im Arsch oder? ;(
kleines Problem.
Da ein Freund Probleme mit Froyo von Quarx hatte, wollte ich ihm die 2.1 wieder flashen, zuerst hab ichs mit clockwork recovery probiert, da kam aber irgendwas mit md5 not found oder so....
Jedenfalls hatte ich es dann normal geflasht mit updater und so.
Als er dann fertig war, blieb er immer bei dem ANDROID-bootlogo stehen.
Dann entschied ich mich für den Rettungsflash, also starten des phones in downloadmodus.
Als er fertig mit flashen war, blieb er beim LG-Logo schon stehen.
Ich habs jetzt ein paar mal probiert, mit Rettungsflash, aber es läuft immer aufs selbe hinaus.
Hier mal die Flash Log:
[17:22:56:748] : =============================================
[17:22:56:748] : Log is started on 24.01.2011, at 17:22:56:748,
executable: C:\Users\Simon\Desktop\lg\KDZ_FW_UPD.exe (ProcID: 0x0000120c),
compile time : Sep 8 2010 17:19:53
[17:22:56:748] : Version :
[17:22:56:750] : strFilename1 = eur
[17:22:56:750] : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz, m_nSelectedImages= 70787108
[17:23:06:540] : Start Web Downloading
[17:23:06:540] : Get Usb Port
[17:23:06:544] : rsi.strFriendlyName=Kommunikationsanschluss (COM1)
[17:23:06:544] : Remove Kommunikationsanschluss (COM1)
[17:23:06:544] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM8)
[17:23:06:544] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[17:23:06:544] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM8
[17:23:06:544] : Port = COM8
[17:23:06:545] : Clear
[17:23:06:545] : Clear
[17:23:06:556] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:556] : Clear
[17:23:06:557] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:557] : Clear
[17:23:06:558] : UNKNOWN : Req(12) -> Rsp(13)
[17:23:06:558] : >> DIAG_STATUS_F FAILED
[17:23:06:563] : >>Get Model Name [DIAG_VERNO_F]
[17:23:06:563] : Clear
[17:23:06:564] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:564] : Clear
[17:23:06:565] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:565] : Clear
[17:23:06:566] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:566] : Clear
[17:23:06:567] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:567] : Clear
[17:23:06:568] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:568] : Clear
[17:23:06:569] : BAD CONN MODE : Req(0) -> Rsp(3)
[17:23:06:569] : FAIL (No Phone)
[17:23:06:569] : GetModelName() Operation Failed Check Diag CMD
[17:23:06:569] : EMERGENCY Booting Mode
[17:23:06:569] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[17:23:06:569] : Clear
[17:23:06:569] : Clear
[17:23:06:570] : BS/GT540/7Data\LGMOBILEAX\Phone\europen
[17:23:06:570] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - GT540
[17:23:06:570] : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[17:23:06:570] : Clear
[17:23:06:570] : Clear
[17:23:06:571] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:571] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:571] : Clear
[17:23:06:572] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:572] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:572] : Clear
[17:23:06:573] : DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[17:23:06:573] : [ DLOAD ERROR ] : NAK_INVALID_CMD
[17:23:06:573] : FAIL
[17:23:06:573] : Phone_Diag_Status = FALSE
[17:23:06:573] : Clear
[17:23:06:573] : Clear
[17:23:06:584] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:584] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:584] : Clear
[17:23:06:585] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:585] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:585] : Clear
[17:23:06:586] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[17:23:06:586] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[17:23:06:586] : NV Write Fail : NV ITEM 9028(9028)
[17:23:06:686] : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)
[17:23:06:686] : >> GET DLOAD COMM MODE
[17:23:06:686] : Clear
[17:23:06:686] : Clear
[17:23:06:687] : [GetCommMode] Communication mode : 2
[17:23:06:687] : Pre Nand Download
[17:23:06:687] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[17:23:06:687] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[17:23:06:687] : Clear
[17:23:06:687] : Clear
[17:23:06:688] : [COM8] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[17:23:06:688] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[17:23:06:688] : NandFlashInitWithFile ::
[17:23:06:688] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[17:23:06:688] : Clear
[17:23:06:688] : Clear
[17:23:06:699] : Clear
[17:23:06:699] : Clear
[17:23:06:700] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[17:23:06:700] : m_nSelectedImages= 70787108,Type= 3
[17:23:06:700] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[17:23:06:700] : [COM8] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[17:23:06:700] : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[17:23:06:700] : NandFlashInitWithFile ::
[17:23:06:701] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[17:23:06:701] : Clear
[17:23:06:701] : Clear
[17:23:06:712] : >> AMSS FLASHING ...
[17:23:06:713] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[17:23:06:713] : Sending Pkt Seq : 0
[17:23:06:713] : Clear
[17:23:06:713] : Sending Pkt Seq : 1
jetzt sendet er alle pakete (waren echt viel)
[17:25:50:355] : Sending Pkt Seq : 114438
[17:25:50:355] : Tx packet : Last packet sequence : 114439
[17:25:50:355] : Sending Pkt Seq : 114439
[17:25:50:376] : _Reset_N_Close bFirst = 1
[17:25:50:376] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[17:25:50:376] : [COM8] Reset [DLOAD]
[17:25:50:376] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - RESET
[17:25:50:676] : Clear
[17:25:50:676] : Clear
[17:25:50:676] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[17:25:50:976] : Clear
[17:25:50:976] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[17:25:50:976] : Close Port<<
[17:27:30:977] : Clear
[17:27:30:977] : Clear
[17:27:30:977] : Clear
[17:27:30:978] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:978] : Clear
[17:27:30:979] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:979] : Clear
[17:27:30:990] : Error in DLOAD MODE : Req(12) -> Rsp(19)
[17:27:30:990] : >> DIAG_STATUS_F FAILED
[17:27:30:995] : >>Get Model Name [DIAG_VERNO_F]
[17:27:30:995] : Clear
[17:27:30:996] : strModel = GT540
[17:27:30:996] : Read NV item: 71 NV ITEM 71 [71]
[17:27:30:996] : Clear
[17:27:30:997] : CSW
[17:27:30:997] : Banner : CSW
[17:27:30:997] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - GT540
[17:27:30:997] : Clear
[17:27:31:008] : Write NV item:9028 NV ITEM 9028
[17:27:31:008] : 9028 - NV_DONE_S Item
[17:27:31:008] : Clear
[17:27:31:008] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[17:27:31:008] : Close Port<<
[17:27:31:008] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_OK
[17:27:33:055] : Log finished
es kommt ja ein paar mal error in dlmode (warscheinlich downloadmode)
danke im Vorraus
Okey jetzt sind wir wieder so weit, dass er beim ANDROID logo nicht weiterbootet.
Soll ichs vielleicht einfach mal ne viertel stunde rumbooten lassen?
Bei mir hats meistens nach dem flashen immer so 2-5 minuten gedauert...
Garantie wäre im Arsch oder? ;(
Zuletzt bearbeitet: