[Kernel][Yank555][Sammy 4.3 v4.1c][Sammy 4.1.2 v3.4f]

[yank555]

Hört sich gut an. Kannst du schon ein ungefähren Veröffentlichungszeitraum sagen für den 0.6?

Hmm ... mal schaun ... wie wär's mit jetzt ??

Schaut mal hier.

Bitte Zane danke sagen, er hat dem ersten "Ausgang" des neuen Biestes zugestimmt

JP.

 

[EdgA]

... hin dann mal flashen... besten dank zane und yank :beer:

 

[ZaneZam]

ja leute viel spass damit, und danke JP für die gute zusammenarbeit!

 

[EdgA]

jetzt funktioniert das auch mit der 500 MHz "Begrenzung"

 

[156436]

Danke dir auch Zane. Zane andi und Yank sind das absolute dream Team. Perfekte Arbeit.
0.6er und Yank beta 5 laufen so auf den ersten blick sehr gut. Im Aroma steht noch bei den Profilen zzmoove 0.5 aber das is nur ein kleiner Schönheitsfehler.

LG Marco.
Btw. Morgen oder übermorgen sag ich dann noch was zur Akku Laufzeit

 

[yank555]

Im Aroma steht noch bei den Profilen zzmoove 0.5 aber das is nur ein kleiner Schönheitsfehler.

Ach du liebe Güte, die Kinder wachsen einfach zu schnell

JP.

PS: Ist schon bei mir verbessert, passt dann auch beim nächsten Update

 

[156436]

Kein Problem. Ich mein wenn das der einzige Bug is ist mir das Schnuppe. Ich muss ja eh immer nur einmal pro beta/update installieren.
Stimmt kaum is das Kind 5 wird es schon 6. Wie die Zeit vergeht...

 

[Sakaschi]

Gott sei dank muss ich den Kernel nicht schon wieder flashen. Aber rennt echt geil. Aosp Roms steht Dank den governor von Zane und yanks Kernel der Sammy Rom nichts nach

 

[156436]

Wollt ich auch gerade sagen. Mit dem zzmoove und den Yank Profilen kann man da ordentlich was aus cm raus holen.

 

[S13gfried]

Hmm ... mal schaun ... wie wär's mit jetzt ??

Schaut mal hier.

Bitte Zane danke sagen, er hat dem ersten "Ausgang" des neuen Biestes zugestimmt

JP.

Ihr seid beide Tiere


EDIT:
gleiche Releasenummer, aber "neuer" als vor ner Stunde ?^^

 

[Lycidias]

So, hab die fixed beta nun auch geflasht und touchboost auf 500mhz gestellt.. Taktet aber weiterhin auf 800mHz ooo

 

[Sakaschi]

poste mal deine init.kernel.sh zu finden /system/etc/

 

[yank555]

gleiche Releasenummer, aber "neuer" als vor ner Stunde ?^^

Eigentlich älter, die beta5 ist von gestern, die beta5-public war nur mit zzmoove 0.5.1b statt eben zzmoove 0.6beta3

Kompliziert die ganzen Versionsdinger, wie dem auch sei, "v1.6d-beta5" ist das aktuellste was zu haben ist :blushing:

JP.

 

[Lycidias]

Spoiler

#!/system/bin/sh
#--------------------------------------------------
# Yank555.lu - generated kernel options init script
#--------------------------------------------------

log_file="/data/kernel-boot.log"

echo "----------------------------------------------------" >$log_file
echo "Yank555.lu - execution of kernel options init script" >>$log_file
echo "----------------------------------------------------" >>$log_file
echo "Kernel version : `uname -a`" >>$log_file

echo `date +"%F %R:%S : Waiting for Android to start..."` >>$log_file

# Wait until we see some android processes to consider boot is more or less complete (credits to AndiP71)
while ! /sbin/pgrep com.android ; do
sleep 1
done

echo `date +"%F %R:%S : Android is starting up, let's wait another 10 seconds..."` >>$log_file

# Now that is checked, let's just wait another tiny little bit
sleep 10

echo `date +"%F %R:%S : Starting kernel configuration..."` >>$log_file

# Script generated on 01/07/2013 at 20:12
#----------------------------------------------------

# - init.d support by kernel/ramdisk not installed
echo `date +"%F %R:%S : Init.d script execution support disabled."` >>$log_file
ls -al /system/etc/init.d >>$log_file

# - Set governor to zzmoove
echo "zzmoove" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo `date +"%F %R:%S : CPU governor set to zzmoove."` >>$log_file

# - Enable touchboost
echo "1" > /sys/devices/virtual/misc/touchboost_switch/touchboost_switch
echo "500000" > /sys/devices/virtual/misc/touchboost_switch/touchboost_freq
echo `date +"%F %R:%S : Touchboost enabled at 500MHz."` >>$log_file

# - Set CPU max frequencies for all 4 cores
echo 1600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
echo `date +"%F %R:%S : CPU max. frequency set to 1.6GHz."` >>$log_file

# - zzmoove v0.5 battery profile (by yank555.lu)
echo `date +"%F %R:%S : zzmoove - yank-battery profile :"` >>$log_file

# zzmoove governor settings optimized for battery:
echo "180000" >/sys/devices/system/cpu/cpufreq/zzmoove/sampling_rate
echo `date +"%F %R:%S : zzmoove - sampling rate set to 180000."` >>$log_file
echo "1" >/sys/devices/system/cpu/cpufreq/zzmoove/sampling_down_factor
echo `date +"%F %R:%S : zzmoove - sampling down factor set to 1."` >>$log_file
echo "80" >/sys/devices/system/cpu/cpufreq/zzmoove/up_threshold
echo `date +"%F %R:%S : zzmoove - up threshold set to 80."` >>$log_file
echo "40" >/sys/devices/system/cpu/cpufreq/zzmoove/down_threshold
echo `date +"%F %R:%S : zzmoove - down threshold set to 40."` >>$log_file
echo "0" >/sys/devices/system/cpu/cpufreq/zzmoove/ignore_nice_load
echo `date +"%F %R:%S : zzmoove - ignore nice load set to 0."` >>$log_file
echo "10" >/sys/devices/system/cpu/cpufreq/zzmoove/freq_step
echo `date +"%F %R:%S : zzmoove - frequency step set to 10."` >>$log_file
echo "65" >/sys/devices/system/cpu/cpufreq/zzmoove/smooth_up
echo `date +"%F %R:%S : zzmoove - smooth up set to 65."` >>$log_file

# hotplug up threshold per core ("smoother" hotplugging)
echo "70" >/sys/devices/system/cpu/cpufreq/zzmoove/up_threshold_hotplug1
echo `date +"%F %R:%S : zzmoove - up threshold hotplug1 set to 70."` >>$log_file
echo "80" >/sys/devices/system/cpu/cpufreq/zzmoove/up_threshold_hotplug2
echo `date +"%F %R:%S : zzmoove - up threshold hotplug2 set to 80."` >>$log_file
echo "98" >/sys/devices/system/cpu/cpufreq/zzmoove/up_threshold_hotplug3
echo `date +"%F %R:%S : zzmoove - up threshold hotplug3 set to 98."` >>$log_file

# hotplug down threshold per core ("smoother" hotplugging)
echo "55" >/sys/devices/system/cpu/cpufreq/zzmoove/down_threshold_hotplug1
echo `date +"%F %R:%S : zzmoove - down threshold hotplug1 set to 55."` >>$log_file
echo "65" >/sys/devices/system/cpu/cpufreq/zzmoove/down_threshold_hotplug2
echo `date +"%F %R:%S : zzmoove - down threshold hotplug2 set to 65."` >>$log_file
echo "75" >/sys/devices/system/cpu/cpufreq/zzmoove/down_threshold_hotplug3
echo `date +"%F %R:%S : zzmoove - down threshold hotplug3 set to 75."` >>$log_file

# Screen off settings
echo "4" >/sys/devices/system/cpu/cpufreq/zzmoove/sampling_rate_sleep_multiplier
echo `date +"%F %R:%S : zzmoove - sampling rate sleep multiplier set to 4."` >>$log_file
echo "98" >/sys/devices/system/cpu/cpufreq/zzmoove/up_threshold_sleep
echo `date +"%F %R:%S : zzmoove - up threshold sleep set to 98."` >>$log_file
echo "55" >/sys/devices/system/cpu/cpufreq/zzmoove/down_threshold_sleep
echo `date +"%F %R:%S : zzmoove - down threshold sleep set to 55."` >>$log_file
echo "1" > /sys/devices/system/cpu/cpufreq/zzmoove/freq_step_sleep
echo `date +"%F %R:%S : zzmoove - CPU step for standby set to 1."` >>$log_file
echo "100" >/sys/devices/system/cpu/cpufreq/zzmoove/smooth_up_sleep
echo `date +"%F %R:%S : zzmoove - smooth up sleep set to 100."` >>$log_file
echo "1" >/sys/devices/system/cpu/cpufreq/zzmoove/hotplug_sleep
echo `date +"%F %R:%S : zzmoove - hotplug sleep set to 1."` >>$log_file

echo `date +"%F %R:%S : zzmoove - yank-battery profile applied."` >>$log_file

# - Set CPU max frequency in standby
echo "600000" > /sys/devices/system/cpu/cpufreq/zzmoove/freq_limit_sleep
echo `date +"%F %R:%S : zzmoove - CPU freq. max for standby set to 600MHz."` >>$log_file

# use 1 step up/down fast scaling when screen is on
echo "5" > /sys/devices/system/cpu/cpufreq/zzmoove/fast_scaling
echo `date +"%F %R:%S : zzmoove - 1 step up/down fast scaling enabled."` >>$log_file

# use 4 steps up/down fast scaling when screen is off
echo "8" > /sys/devices/system/cpu/cpufreq/zzmoove/fast_scaling_sleep
echo `date +"%F %R:%S : zzmoove - 4 steps up/down fast scaling for standby enabled."` >>$log_file

# Use early demand
echo "1" > /sys/devices/system/cpu/cpufreq/zzmoove/early_demand
echo `date +"%F %R:%S : zzmoove - early demand enabled."` >>$log_file

# Early demand : set threshold to 50%
echo "50" > /sys/devices/system/cpu/cpufreq/zzmoove/grad_up_threshold
echo `date +"%F %R:%S : zzmoove - early demand threshold set to 50%."` >>$log_file

# - zRam activation - 600Mb
if [ -e /sys/block/zram0/disksize ] ; then
swapoff /dev/block/zram0
echo 1 > /sys/block/zram0/reset
echo 629145600 > /sys/block/zram0/disksize
echo 1 > /sys/block/zram0/initstate
swapon /dev/block/zram0
fi
echo `date +"%F %R:%S : 600Mb Zram Support enabled."` >>$log_file

# - Hardswap by Yank555.lu not installed
echo `date +"%F %R:%S : Hardswap Support disabled."` >>$log_file

# - swappiness set to 80
echo 80 > /proc/sys/vm/swappiness;
echo `date +"%F %R:%S : Swappiness set to 80."` >>$log_file

# - Enable custom current forced fast charge
echo 2 > /sys/kernel/fast_charge/force_fast_charge
echo `date +"%F %R:%S : Fast Charge - Custom Current Mode enabled."` >>$log_file
echo 900 > /sys/kernel/fast_charge/usb_charge_level
echo `date +"%F %R:%S : Fast Charge - USB charge level set to 900mA/h."` >>$log_file
echo 1000 > /sys/kernel/fast_charge/ac_charge_level
echo `date +"%F %R:%S : Fast Charge - AC charge level set to 1000mA/h."` >>$log_file

# - Enable dynamic deferred file sync (by faux123)
# While screen is on, file sync is temporarily deferred, when screen
# is turned off, a flush is called to synchronize all outstanding writes.
echo 1 > /sys/kernel/dyn_fsync/Dyn_fsync_active
echo `date +"%F %R:%S : Dynamic Deferred File Sync enabled."` >>$log_file

# - Disable touch wake
echo 0 > /sys/class/misc/touchwake/disabled
echo `date +"%F %R:%S : Touch Wake disabled."` >>$log_file

# - Enable fading notification LED
echo 1 > /sys/class/sec/led/led_fade
echo `date +"%F %R:%S : Notification LED set to fading mode."` >>$log_file

# - Enable notification LED with high intensity
echo 128 > /sys/class/sec/led/led_intensity
echo `date +"%F %R:%S : Notification LED set to high intensity."` >>$log_file

# - Enable notification LED blinking/fading twice as fast
echo 2 > /sys/class/sec/led/led_speed
echo `date +"%F %R:%S : Notification LED set to blinking/fading twice as fast."` >>$log_file

# - Enable notification LED fading in and out
echo "1 1 1 1" > /sys/class/sec/led/led_slope
echo `date +"%F %R:%S : Notification LED fading style to fading in and out."` >>$log_file

# - Do not load CIFS kernel modules on boot
echo `date +"%F %R:%S : CIFS kernel modules not loaded."` >>$log_file

# - Do not load NFS kernel modules on boot
echo `date +"%F %R:%S : NFS kernel modules not loaded."` >>$log_file

# - Do not load ntfs kernel module on boot
echo `date +"%F %R:%S : NTFS kernel module not loaded."` >>$log_file

# - Do not load isofs kernel module on boot
echo `date +"%F %R:%S : ISOFS kernel module not loaded."` >>$log_file

# - Do not load UDF kernel module on boot
echo `date +"%F %R:%S : UDF kernel module not loaded."` >>$log_file

# - Do not load XBOX 360 gamepad kernel module on boot
echo `date +"%F %R:%S : XBOX 360 gamepad support kernel module not loaded."` >>$log_file

# Wait for everything to become ready
echo `date +"%F %R:%S : Waiting 60 seconds..."` >>$log_file
sleep 60
# Internal MMC readahead buffer size
echo 512 > /sys/block/mmcblk0/bdi/read_ahead_kb
echo `date +"%F %R:%S : Internal MMC Readahead set to 512Kb."` >>$log_file

# Internal MMC I/O scheduler
echo "row" > /sys/block/mmcblk0/queue/scheduler
echo `date +"%F %R:%S : Internal MMC scheduler set to ROW."` >>$log_file

# SD card readahead buffer size
echo 1024 > /sys/block/mmcblk1/bdi/read_ahead_kb
echo `date +"%F %R:%S : External MMC Readahead set to 1024Kb."` >>$log_file

# SD card I/O scheduler
echo "cfq" > /sys/block/mmcblk1/queue/scheduler
echo `date +"%F %R:%S : External MMC scheduler set to CFQ."` >>$log_file

# - Set Android Low Memory Killer to Stock SGS3 +15Mb (in number of pages of 4Kbytes)
# Forground apps : 12032 pages / 47Mb
# Visible apps : 14080 pages / 55Mb
# Secondary server : 16128 pages / 63Mb
# Hidden apps : 18176 pages / 71Mb
# Content providers : 20224 pages / 79Mb
# Emtpy apps : 22272 pages / 87Mb
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "12032,14080,16128,18176,20224,22272" > /sys/module/lowmemorykiller/parameters/minfree
echo `date +"%F %R:%S : Android Low Memory Killer set to Stock SGS3 +15Mb."` >>$log_file

# Enable Boeffla Sound Engine by AndiP71
echo `date +"%F %R:%S : Waiting 30 seconds..."` >>$log_file
sleep 30
echo "1" > /sys/class/misc/boeffla_sound/boeffla_sound
echo `date +"%F %R:%S : Boeffla Sound Engine - Master Switch enabled."` >>$log_file

# Speaker sound output level - Stock +3
echo "60 60" > /sys/class/misc/boeffla_sound/speaker_volume
echo `date +"%F %R:%S : Boeffla Sound Engine - +3 speaker level."` >>$log_file

# Headphones sound output level - Stock +3
echo "60 60" > /sys/class/misc/boeffla_sound/headphone_volume
echo `date +"%F %R:%S : Boeffla Sound Engine - +3 headphones level."` >>$log_file

# Disable Equalizer Mode
echo "0" > /sys/class/misc/boeffla_sound/eq
echo `date +"%F %R:%S : Boeffla Sound Engine - Equalizer Mode disabled."` >>$log_file

# No Equalizer Settings changes
echo `date +"%F %R:%S : Boeffla Sound Engine - No Equalizer Settings changed."` >>$log_file

# Disable Privacy Mode
echo "0" > /sys/class/misc/boeffla_sound/privacy_mode
echo `date +"%F %R:%S : Boeffla Sound Engine - Privacy Mode disabled."` >>$log_file

# Enable DAC direct
echo "1" > /sys/class/misc/boeffla_sound/dac_direct
echo `date +"%F %R:%S : Boeffla Sound Engine - DAC direct enabled."` >>$log_file

# Enable DAC 128bit oversampling
echo "1" > /sys/class/misc/boeffla_sound/dac_oversampling
echo `date +"%F %R:%S : Boeffla Sound Engine - DAC oversampling enabled."` >>$log_file

# Enable FLL clock tuning
echo "1" > /sys/class/misc/boeffla_sound/fll_tuning
echo `date +"%F %R:%S : Boeffla Sound Engine - FLL-Tuning enabled."` >>$log_file

# Enable Speaker Tuning
echo "1" > /sys/class/misc/boeffla_sound/speaker_tuning
echo `date +"%F %R:%S : Boeffla Sound Engine - Speaker Tuning enabled."` >>$log_file

echo `date +"%F %R:%S : Finished kernel configuration."` >>$log_file

chmod 644 $log_file

#--------------------------------------------------
# End of generated script
#--------------------------------------------------

hier bitte

 

[Sakaschi]

sollte gehen das wichtige wäre das hier

# - Enable touchboost
echo "1" > /sys/devices/virtual/misc/touchboost_switch/touchboost_switch
echo "500000" > /sys/devices/virtual/misc/touchboost_switch/touchboost_freq
echo `date +"%F %R:%S : Touchboost enabled at 500MHz."` >>$log_file

und das ist alles richtig. haste wirklich den kernel geflasht den yank ein beitrag über dir genannt hat?

 

[Lycidias]

Hmm ja, habe extra drauf geachtet nicht die public zu flashen

 

[yank555]

Hmm ja, habe extra drauf geachtet nicht die public zu flashen

Was sagt denn deine "/data/kernel-boot.log" ?

JP.

 

[Jenanga]

da manche hier für das s3 den 3000 mha Akku nutzen gibt es eine Möglichkeit den wert im system von 2100mha auf 3000mha zu ändern?

 

[Lycidias]

Die sagt:

Spoiler

----------------------------------------------------
Yank555.lu - execution of kernel options init script
----------------------------------------------------
Kernel version : Linux localhost 3.0.84-Yank555.lu-CM10.1-v1.6d-beta5 #285 SMP PREEMPT Sun Jun 30 17:51:54 CEST 2013 armv7l GNU/Linux
2013-07-01 22:13:16 : Waiting for Android to start...
2013-07-01 22:13:39 : Android is starting up, let's wait another 10 seconds...
2013-07-01 22:13:51 : Starting kernel configuration...
2013-07-01 22:13:51 : Init.d script execution support disabled.
-rwxr-xr-x root shell 1748 2008-08-01 14:00 00slim
-rwxr-xr-x root shell 215 2008-08-01 14:00 80cfw
-rwxr-xr-x root shell 416 2008-08-01 14:00 90userinit
-rwxr-xr-x root shell 208 2008-08-01 14:00 98tweaks
2013-07-01 22:13:51 : CPU governor set to zzmoove.
2013-07-01 22:13:51 : Touchboost enabled at 500MHz.
2013-07-01 22:13:51 : CPU max. frequency set to 1.6GHz.
2013-07-01 22:13:51 : zzmoove - yank-battery profile :
2013-07-01 22:13:51 : zzmoove - sampling rate set to 180000.
2013-07-01 22:13:51 : zzmoove - sampling down factor set to 1.
2013-07-01 22:13:51 : zzmoove - up threshold set to 80.
2013-07-01 22:13:51 : zzmoove - down threshold set to 40.
2013-07-01 22:13:51 : zzmoove - ignore nice load set to 0.
2013-07-01 22:13:51 : zzmoove - frequency step set to 10.
2013-07-01 22:13:51 : zzmoove - smooth up set to 65.
2013-07-01 22:13:51 : zzmoove - up threshold hotplug1 set to 70.
2013-07-01 22:13:51 : zzmoove - up threshold hotplug2 set to 80.
2013-07-01 22:13:51 : zzmoove - up threshold hotplug3 set to 98.
2013-07-01 22:13:51 : zzmoove - down threshold hotplug1 set to 55.
2013-07-01 22:13:51 : zzmoove - down threshold hotplug2 set to 65.
2013-07-01 22:13:51 : zzmoove - down threshold hotplug3 set to 75.
2013-07-01 22:13:51 : zzmoove - sampling rate sleep multiplier set to 4.
2013-07-01 22:13:51 : zzmoove - up threshold sleep set to 98.
2013-07-01 22:13:51 : zzmoove - down threshold sleep set to 55.
2013-07-01 22:13:51 : zzmoove - CPU step for standby set to 1.
2013-07-01 22:13:51 : zzmoove - smooth up sleep set to 100.
2013-07-01 22:13:51 : zzmoove - hotplug sleep set to 1.
2013-07-01 22:13:51 : zzmoove - yank-battery profile applied.
2013-07-01 22:13:51 : zzmoove - CPU freq. max for standby set to 600MHz.
2013-07-01 22:13:51 : zzmoove - 1 step up/down fast scaling enabled.
2013-07-01 22:13:51 : zzmoove - 4 steps up/down fast scaling for standby enabled.
2013-07-01 22:13:51 : zzmoove - early demand enabled.
2013-07-01 22:13:51 : zzmoove - early demand threshold set to 50.
2013-07-01 22:13:51 : 600Mb Zram Support enabled.
2013-07-01 22:13:51 : Hardswap Support disabled.
2013-07-01 22:13:51 : Swappiness set to 80.
2013-07-01 22:13:51 : Fast Charge - Custom Current Mode enabled.
2013-07-01 22:13:51 : Fast Charge - USB charge level set to 900mA/h.
2013-07-01 22:13:51 : Fast Charge - AC charge level set to 1000mA/h.
2013-07-01 22:13:51 : Dynamic Deferred File Sync enabled.
2013-07-01 22:13:51 : Touch Wake disabled.
2013-07-01 22:13:51 : Notification LED set to fading mode.
2013-07-01 22:13:51 : Notification LED set to high intensity.
2013-07-01 22:13:51 : Notification LED set to blinking/fading twice as fast.
2013-07-01 22:13:51 : Notification LED fading style to fading in and out.
2013-07-01 22:13:51 : CIFS kernel modules not loaded.
2013-07-01 22:13:51 : NFS kernel modules not loaded.
2013-07-01 22:13:51 : NTFS kernel module not loaded.
2013-07-01 22:13:51 : ISOFS kernel module not loaded.
2013-07-01 22:13:51 : UDF kernel module not loaded.
2013-07-01 22:13:51 : XBOX 360 gamepad support kernel module not loaded.
2013-07-01 22:13:51 : Waiting 60 seconds...
2013-07-01 22:14:51 : Internal MMC Readahead set to 512Kb.
2013-07-01 22:14:51 : Internal MMC scheduler set to ROW.
2013-07-01 22:14:51 : External MMC Readahead set to 1024Kb.
2013-07-01 22:14:51 : External MMC scheduler set to CFQ.
2013-07-01 22:14:51 : Android Low Memory Killer set to Stock SGS3 +15Mb.
2013-07-01 22:14:51 : Waiting 30 seconds...
2013-07-01 22:15:21 : Boeffla Sound Engine - Master Switch enabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - +3 speaker level.
2013-07-01 22:15:21 : Boeffla Sound Engine - +3 headphones level.
2013-07-01 22:15:21 : Boeffla Sound Engine - Equalizer Mode disabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - No Equalizer Settings changed.
2013-07-01 22:15:21 : Boeffla Sound Engine - Privacy Mode disabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - DAC direct enabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - DAC oversampling enabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - FLL-Tuning enabled.
2013-07-01 22:15:21 : Boeffla Sound Engine - Speaker Tuning enabled.
2013-07-01 22:15:21 : Finished kernel configuration.

 

[Sakaschi]

passt alles. sicher das keine andere app grade sich nach vorne gedrängt hat gleichzeitig während du gedrückt hast?

dann kriege ich auch höhere werte liegt an meine apps die dann noch starten oder sonstiges.