[KERNEL][4.4.X&5.0.1][AOSP&CM]AGNi pureCM v3.0.1(ANYROM)[03/06]

[DirtyKlot]

Original-Thread --><-- Original-Thread

Dieser Kernel basiert auf den CM11-smdk4412-Kernel-Sources!

Funktionen:

• CPU GOVERNORS: conservative, ondemand, powersave, interactive, performance, userspace, lulzactive, lulzactiveq, pegasusq, zzmoove (since v2.3.1)
• I/O GOVERNORS: deadline, cfq, row, sio (additional V(R) & BFQ v5r1 I/O schedulers since v2.3)
• default cpu governor: lulzactiveq
• default I/O governor: row
• NTFS R/W kernel support
• CIFS & NFS Network FileSystems
• swap support enabled
• KSM enabled
• cleancache enabled
• automatic efs backup on /data/media/psn-efs-backup
• Boeffla Sound-Engine
• 512MB Zram mit zcache
• Zram mit SNAPPY Kompression als 1. Swap-Priorität (Google SNAPPY-v3 in v2.3) (LZ4 seit v2.3.1)
  (LOW CPU LOAD FOR COMPRESSION of ram memory blocks with little loss of compression ratio compared to default LZO compression)
• Selbst-kompiliertes Busybox
• Dieser Kernel verwendet LZMA Kompression
• F2FS-Support
• Boeffla Sound-Engine
• Touchwake
• Möglichkeit zum Über-/Untertakten und -volten
• Sämtliche Features können dem XDA-Thread aufgrund dessen Unübersichtlichkeit aus dem Changelog entnommen werden

Changelogs siehe Post #2.

Downloads:
HIER

Credits:

• CM TEAM
• [ADI & TEAM]
• andreilux
• AndiP for Boeffla App and other works
• Yank555 for support

Wie immer übernehmen weder Android-Hilfe noch ich die Verantwortung für euer Handeln!
​

 

[DirtyKlot]

Changelogs:

03-06-2015 Update v4.4.5 (Stock-sources based)

• Use drivers/usb/gadget from CM source for AGNi pureCM builds | Bring net/bluetooth and drivers/usb/core to GT-N7100_KK_Opensource_Update1 state | Revert "earysuspend: speedup late resume (faster wakeup of the device)" | drivers/cpufreq: misc governor changes (arter97) | Revert "cpu boost: backport missing functions from 3.4 (DerTeufel)" | Revert "cpufreq: Add cpu-boost driver" | Revert "cpufreq: Add a sync limit to cpu-boost" | drivers/cpufreq: Add smartass v2 , update interactive (arter97) | Implemented intelli_plug (arter97) | Revert "scheduler: compute time-average nr_running per run-queue" | Add samsung sdcardfs from 5.0 as sdcardfslp (arter97) | netfilter: IDLETIMER: fix invalid deference of timer | ext4: Speed up FITRIM by recording flags in ext4_group_info | ipv4: Missing sk_nulls_node_init() in ping_unhash() | f2fs: ditch SEGMENT_SIZE for f2fs_trim_fs | f2fs: disable userspace FITRIM ioctl for now (anyways we are using auto discard from the kernel) | kernel/futex.c: Squash update | Modify "Dynamically adjust cpufreq_max_limit according to scaling_max setting without breaking power save mode" to be effective only for AGNi pureSTOCK builds | revert wm8994 updates | Agni control app no longer request for root on each boot | touchwake charger mode + 10 sec normal touchwake option.
  Intelli-plug is disabled for "lulzactiveq, pegasusq, pegasusqplus, performance, powersave, userspace, yankasusq, zzmoove, pegasusqpluso" as they have their own hotplugging logic implemented.
  I had frequent SOD's with smartassV2 governor on pureCM, be informed.

12-05-2015 Update v4.4.4 (Stock-sources based)

• Remove and cleanup wolfson sound | Squashed commit - Disable various debugging | Implement kexec-hardboot (newer kitkat-kexec-new branch) | adjustable vibration level in AGNi Control | reapply some previously reverted commits | smdk4412: reboot bootloader boots into download mode | mfc5x-cm: for CM implementation to fix video recording issue

• • 
    
    
    09-05-2015 Update v4.4.3 (Stock-sources based)
    

    • sound/soc/codecs: increase wolfson sound default earphone level to 57 | USB keyboard/mouse role support: fix MacOS compatibility | Revert lot of commits | Switched to GCC 4.8 google prebuilt toolchain

    
    
    04-05-2015 Update v4.4.2
    

    • Revert "freezer: shorten freezer sleep time using exponential backoff" | net/bluetooth/hci_conn.c : fix compiler warnings | sound/soc/codecs: implement proper way of on-the-go switching between Boeffla Sound and Wolfson sound control

    
    
    30-04-2015Update v4.4.1
    

    • drivers/usb/gadget: add required modifications for CM builds | Accumulative squashed fixes + changes from SAMSUNG OSRC I9305 Update | Revised AGNi Control profiles v2.0 | Revised AGNi Control CPU-UV v2.0 based on device's detected asv_level

    
    
    27-04-2015 Update v4.4.0

  Revert: "cpu_pm: Add cpu power management notifiers" | MobiCore: skip initializations with AOSP ROMs (arter97) | lzo: check for length overrun in variable length encoding. | block: disable add_random | selinux: allow unknown by default | selinux: always grant access | fs/f2fs: update (arter97) | Disable CONFIG_BATTERY_MAX77693_CHARGER_SKIP_WAKELOCKS | fimc-is: Adjust to CM/Omnirom implementation | mali: fix Kconfig warning messages | mfc5x: Adjust to CM/Omnirom implementation | Input: Send events one packet at a time | Power/Battery/Charger: Bring back to N7100 preNI1 base

29-03-2015 Update v4.3.9
Revert "MDNIE CONTROL modifications" for now | Backport random driver from Linux 3.19+ | Changes from SHV-E210S_KK_Opensource_Update2.zip | Revert support in fs/ for "mark_buffer_dirty_inode_sync" | Again cleanly Implement kexec-hardboot | pegasusqpluso set as default in AGNi Control


16-03-2015 Update v4.3.8

• Modifications to Charge Level Interface v2, samsung battery and max77693_charger (fixed 2000mA charging) | mdm: Update mdm |ol mm/ashmem.c: fixed a typo introduced by samsung | CIFS: force into modules | Integrate MDNIE CONTROL for digital brightness support (you need to play with tunables manually in /sys/class/misc/mdnie for now) | Update kexec-hardboot | Offline charging bug fix for old bootloader and KK Stock by scholbert@xda

25-01-2015 Update v4.3.7(ANYROM+AROMA) (Lollypop-NewBuilds)

• disable the extra kernel debugging | remove power supply,battery,charging updates from SAMSUNG OSRC I9305 Update (SOD fix) | mali r3p2: IGNORE MALI R3P2 rel 3 blobs API COMPATIBILITY CHECK - This disables the MALI API checking and assumes compatibility, thereby not resorting to black screen - now any r3p2 blobs are supported | samsung-battery : Implement a newer "Charge Level Interface v2" (andip71) | Touch to wake: Add option to keep touch-to-wake active all the time when connected to charger (andip71) | ignored "charger_softreg" wakeLocks for MAX77693 charger | kernel version bumped to v4.3.7 as it shares same stock base with cm specific differences

20-01-2015 Update v3.0.3(ANYROM+AROMA) (Lollypop-NewBuilds)

• Enable various kernel debugging support | Partial power related reverts from I9305 Update | Revert fs related modifications from SAMSUNG OSRC I9305 Update

17-01-2015Update v3.0.2(ANYROM+AROMA) (Lollypop-NewBuilds)

• Revert "mali: update to drivers of GT-N8000_SEA_KK_Opensource.zip" | Revert some mmc & mm changes from "SAMSUNG OSRC I9305 EUR KK Update" | Revert "cpuidle: remove cross-cpu IPI by new latency request." | Revert "timer: optimize apply_slack()" | Revert "cpufreq: Fix policy stucking if user & kernel min/max don't overlap" | Revert "cpuidle: Fix NULL pointer dereference during hotplug" | Revert "ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs" | Revert Mali changes from "SAMSUNG OSRC I9305 EUR KK Update" | ZZmoove Version 1.0 beta5 | Revert "Input: Send events one packet at a time" | net: wireless: bcmdhd: Add support for hidden ssid PNO scan | net: wireless: bcmdhd: Reduce scan dwell time only in power-save mode | net: wireless: bcmdhd: Reduce scan dwell time to reduce power | Made possible coexistence of Boeffla Sound and Wolfson Sound in single Image with on the go switching from Agni Control

09-01-2015 Update v3.0.1(ANYROM+AROMA) (Lollypop-NewBuilds)

• Revert "net: Performance fix for process_backlog" | Revert "ext4: Speedup WB_SYNC_ALL pass called from sync(2)" | Revert "ARM:
• smp: Wait just 1 second for other CPU to halt" | cpu_pm: Add cpu power management notifiers | Rename touchwakee sysfs entries to prevent
• interferences from other rom/app controls

30-12-2014 Update v3.0.0(ANYROM+AROMA) (Lollypop-NewBuilds like: unofficial CM12 | Nameless | RR)

• Total Power of AGNI pureSTOCK v4.3.3_R3 | modified drivers of vibrator, touchkey and touchscreen in line with CM specific
• modifications.

30-12-2014 Update v2.9.2(ANYROM+AROMA) (Kitkat-Lollypop)

• Revert: "smdk4412: Import changes for mfc driver from latest n8000 KK sources" | Re-Enable CONFIG_USE_MFC_CMA for N7100 |
• drivers: bcmdhd: disable IPV4 multicast packets | drivers: samsung_battery: add sysfs entry to query charge state | Revert "n7100: enable
• idletimer" | selinux: fix inode security list corruption | selinux: whitelist f2fs,sdcardfs,sdcardfskk,sdcardfsjb | f2fs: update f2fs to dev branch with
• 3.0.y compatibility [arter97]

15-12-2014 Update v2.9.1 (ANYROM+AROMA) (Kitkat-Lolypop)

• Mali R4P0 UMP: add back missing ioctl
• deadline: Allow 0ms deadline latency
• ext4: remove some debugging functions by Samsung & sync with kernel.org
• Input: Send events one packet at a time
• fs: default to noatime/nodiratime
• zzmoove v1.0 beta4
• Switch to GCChf 4.9.3 linaro cortex-a9 optimised toolchain
• revert many commits
• otg: when removing ED from readyQ also set flag
• removed support for seliinux enforcing mode
• Implement kexec-hardboot Updated
• net/ipv4 updates
• R4P0 variant seems work for unoffficial cm12 roms or nameless cm11 roms

14-08-2014 Update v2.8.5 (ANYROM+AROMA)

• update Mali r3p2-rel4 to SAMSUNG KitKat Source
• Revert "ARM: 7006/1: Migrate to asm-generic wrapper support"
• Revert "Introduce timer slack controller"
• Revert "patch: add SLQB memory allocator by Nick Piggin"
• futex: Prevent attaching to kernel threads
• futex: Add another early deadlock detection check
• cpuset: mm: reduce large amounts of memory barrier related damage v3
• Mdnie Hijack modifications by @gub | cpufreq: Update to zzmoove 0.9-beta3
• workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
• Implement Intelliactive governor (without intelliplug for now)
• ext4: Add support for FIDTRIM, a best-effort ioctl for deep discard trim
• Si47xx: properly free resources if failure to initialize
• mdnie: Enable negative mode compatibility of newer MDNIE drivers
• smdk4412: merge mali r4p0-rel0 driver (R4P0-nameless variant)

07-07-2014 Update v2.8.3 (ANYROM+AROMA)

• Introduce timer slack controller
• fs: vfat: reduce the worst case latencies
• Backport AIO from Linux 3.6.x
• pegasusqplus modifications with firelock
• some ARM specific commits
• fixed UMS mode
• sdcard1<-->sdcard0 switcher v1.2

03-07-2014 Update v2.8.2 (ANYROM+AROMA)

• Boeffla-Sound: Engine 1.6.6
• Implement Update BFQ v6r2 -> v7r2 I/O sched
• More F2FS latest commits
• added option in aroma installer to select alternative old wifi driver module
• dropped touchwake-knockon for now

24-06-2014 Update v2.8.1_R3 (ANYROM+AROMA)

• Further modifications to ramfs strutcuring
• MALI: r3p2 rel3 -> r3p2 rel4
• earysuspend: speedup late resume (faster wakeup of the device)

Alte Changelogs (und Funktionsimplementierungen):

Spoiler

21-06-2014 Update v2.8.1_R2 (ANYROM+AROMA)

• Revamp my ramfs structuring (now the ext4/f2fs status of partitions are ascertained and corresponding changes are made to fstab file on the fly and then they are mounted normally from it)
• made changes to AGNi sdcard1<-->sdcard0 Switcher (using sdcardfs(from stock 4.3) instead of kitkat's sdcardfskk)
• cleaned up my unused code in ramfs
• WiFi Update from v1.141.15 to v1.141.44 [SCH-I605 NA OSRC KK Update]

18-06-2014 Update v2.8.1

• Make sure touchwake is not active when on call
• fix derp arch/arm/mm/cache-l2x0.c
• Finish merging in I9300 update12 display components
• Zzmoove v0.9_beta2
• Fix CVE-2014-3153
• Completely revert all earlier stock source merges ( no time to finish bugs occuring in multiple devices ) except SAMSUNG OSRC SEA KK N7100XXUFND4 updates
• Revert earlier linaro optimisations (those ones effectively reduced performance as per benchmarks)
• fixed disabled touchkey light again turning on after reboot

13-06-2014 Update 2.8.0

• Applied lot of newer f2fs commits
• sync cm kernel sources
• Implemented SLQB memory allocator
• support for kernel mode NEON
• applied many ARM-specific commits
• arm/crypto: Add optimized AES and SHA1 routines
• drivers/mmc: Update from SAMSUNG OSRC I9300 Update 13
• Implement Many Linaro Optimisations
• Enable ARCH_POWER
• fs/sdcardfs: Add sdcardfs support from SAMSUNG OSRC I9300 Update 13
• reduced active zrams to one and set 400MB default size
• added AROMA option for disabling all kernel sound mods
• sync CM kernel sources
• Zzmoove v0.9_beta1
• Merged SAMSUNG OSRC I9300 Update 13, SAMSUNG OSRC I9305 Update 2, SAMSUNG OSRC N7100 JB Opensource Update 3, SAMSUNG OSRC N7105 JB Update 2, SAMSUNG OSRC SCH-I605 JB Update, SAMSUNG OSRC SEA KK N7100XXUFND4 Important Updates - WiFi bcmdhd v1.28.19.28 to v1.141.15_1213_RC2 - VPN interceptor Update - VMWARE modules Update - exFAT v1.2.5 to v1.2.7 - sdcardfs (from 4.3 sources) & sdcardfskk (Kitkat update to sdcardfs) - SAMSUNG MODEM interface updates - QUALCOMM LTE MODEM updates - mmc & nfc update - HID updates - sensors and sensorhub updates - minor mali r3p2 modifications
• Implement touchwake KnockON (arter97)
• AGNi sdcard1<-->sdcard0 Switcher (extsd2intsd replacement for CM using sdcardfskk)
• added 3072 read_ahead_kb option

03-05-2014 Update v2.7.7 (ANYROM+AROMA)

zram, zsmalloc, zcache, cleancache updated from 3.9 | updated lz4, lzo compressor/decompressor and crc32 algorithm | compiled by GCChf 4.9.1 linaro toolchain | reverted some commits | sync CM kernel updates | mm: fix memory management & CM CAMERA FIX (googyanas)

15-04-2014 Update v2.7.6 (ANYROM+AROMA)

• logger: reduce reserved memory
• mm/page_io: remove duplicated compressed pages in memory
• ARM: implement flush_cache_louis()
• cpufreq: Manage only online cpus
• sync cm kernel commits
• reworked AGNi Profiles and backup/restore

23-03-2014 Update v2.7.5 R2 (ANYROM+AROMA)

• Applied some f2fs related commits
• REMOVED AGNi PhoneKill App (will be auto removed as well as it doesnt work and a real fix is out)
• fixed "Encryption Unsuccessful" errors (now u can use /system as ext4 with /data as f2fs)
• changed some mount options
• completely removed ASYNC_FSYNC
• added option to enable/disable dynamic fsync, disabled by default
• added option to enable/disable on-boot filesystems checking (ext4/f2fs) log placed on internal storage
• added option to delete battery stats on each boot
• implemented AROMA GUI installer v2.70 RC2 with boeffla sound and wolfson sound selectables
• added option to set selinux permissive or enforcing
• set ROW as default from now on
• set internalsd and externalsd read_ahead_kb to 512 & 1024 respectively
• implemented Zzmoove v0.8
• iptables support
• [ R3: LMK updated to stock sources
  added ExternalSd USB UMS switching option
  added all Zzmoove v0.8 profiles ]

29-11-2013 Update v2.5 (CM10.2 support ends here) :-
For Cm10.x : Upstream to 3.0.101 | some performance improvements | internal & external SD read_ahead_kb values user tweakable | Implemented Power Saving CPU load balancer (sched_mc_power_savings) | user changable Quad-Zram implementation(with equal swap priority) size and swappiness | some code change regarding how boeffla sound is handled upon boot
For CM 11 Unofficials : Implemented MALI r3p2 GPU drivers | Implemented SAMSUNG OSRC I9300 Update 12 s3cfb patches | added "Export SECONDARY_STORAGE to /storage/sdcard1" | updated healthd binary | added ignore unstable power charging option (changed custom charging code implementation) | applied Fix external sdcard mountpoint | some code change regarding how boeffla sound is handled upon boot | Implemented MALI r3p2 GPU OC/UV Note that for current implementation users have to OverVolt GPU manually if GPU OC
Generic framework "framework-2.jar" introduced in v2.4 and above (teamed up with Yank555, Googy, Teufel, AndiP, Temasek), this is to get rid of proprietory framework naming conventions and come up with an aligned approach between rom and kernel devs.
So please do pass this message along to your favorite ROM devs, we have stopped supporting additional frameworks with specific ROM names.(Bam Rom & PAC to be precise) Note that only framework-2.jar is supported, (instead of framework-pac.jar or framework-bam.jar) you have to rename depending on ur rom

30-11-2013 v2.5a (CM11 UNOFFICIALS) :-
updated Mali r3p2 OC/UV implementation (now users dont have to OverVolt GPU when GPU OC) | reduced some mali debug messages

02-12-2013 v2.5b (CM11 UNOFFICIALS) :-
applied fix for broken MALI r3p2 GPU OC/UV sysinterface | introduced "160/266/350/400/440" GPU freq steps in Boeffla Tweaks
SUPPORTED CM11_UNOFFICIAL ROMS: OMNI, PARANOIDANDROID 4, thddude

12-12-2013 v2.5c (CM11) :-
applied some more Mali400 gpu oc/uv fixes | updated WiFi drivers from 1.61.47 --> 1.61.58 | synced to latest CM 11 official kernel sources | auto calibration of proximity sensor

21-12-2013 v2.5d (CM11) :-
Moved to better 1.8GHz CPU OC/UV implementation | OMNI-type vibrator, hardware keys, backlight sysfs implementation (OMNIROM) | exFAT integrated in kernel by default instead of modules | Updated exFAT to v1.2.5 | added settings backup and restore to Boeffla Tweaks and its reset settings will not need reboot and default settings will be applied instantly

25-12-2013 reuploaded v2.5d (CM11) :-
Implemented Touchwake v1.1a | added support for more roms

04-01-2014 Update v2.5e (CM11) :-
Implemented Frandom | tweaked "random" (the default linux kernel RNG/PRNG device) | added Frandom lagfix-helper option in AGNi Control (/dev/random and /dev/urandom is replaced by symlinked /dev/frandom and /dev/erandom respecively = speeds up entropy generation without seeder app or rngd service) | Replaced "Boeffla Tweaks" app with my modified "AGNi Control" app (TESTED ART COMPATIBLE) [ THANKS to @HM.Carbide ] | Implemented Toouchboost

18-01-2014 v2.6a (ANY CM11 OFFICIAL/UNOFFICIAL ) :-
==> Introducing my "ANYROM" kernel flash method AKA "Kernel Patcher-v4.1"
(Implementation of my old GALAXY ACE WORKS ) :-
It extracts the installed kernel boot.img from the device
It cracks it open to get the zImage and ramdisk
it extracts this old ramdisk
it removes any unwanted or conflicting elements with AGNi kernel (typically other custom CM kernel ramfs elements)
It adds/removes/patches the files on this extracted ramdisk as necessary
it packs this ramdisk and builds a new flashable boot.img using AGNi compiled zImage
It places its log at /data/.AGNi which is refreshed on each pureCM kernel install
This new boot.img is then flashed !!! Voila !

NB: you wont find any boot.img in this installer zip, dont freak out
THIS "ANYROM" INSTALLATION METHOD DIFFERS WITH "ANYKERNEL" AS IT HAS THE FLEXIBILITY TO MODIFY RAMFS CONTENTS AS REQUIRED
==> Other updates:
Wifi: filter multicast packages while suspended | Proportional Rate Reduction for TCP | reduce battery-monitor timeouts | added PegasusqPlus CPU governor | added Zen I/O scheduler | some reduced debugging | Implemented touchkey and vibrator modifications to make work on CM & OMNI roms | Boeffla-Sound 1.6.5 | added 2GHz OC support | added min cpu freq settings in AGNi Control | added touchkey light modes option in AGNi Control | Implemented s3cfb update12 | Implemented MDNIE HIJACK (sysfs tunables for screen colors, sharpness) - by default natural and standard profiles are available as of now

22-01-2014 Small update v2.6b
Bumped up ANYROM installer to v4.2 | LMK: add config option to support oom_adj values in sources | fixed little bug in touchkey light modes option | CPU UV voltages changed back to normal types.... now non-uv = stock voltages and no need for overvoltage add-on confusion & CPU-UV till -120mV allowed in AGNi Control

24-01-2014 Update v2.6c
arm unaligned memory access | mmc: disable crc for better performance | arch/arm/vfp: change compile flags - Neon & hard-float support | ARM: Add optimised swahb32() byteswap helper | ARM-spinlock: use ticket algorithm for ARMv6+ locking implementation | ARM: L1 cache optimization | Implemented Adaptive Body Bias (ABB) | LMK minfree tweakable from AGNi Control and integrated with AGNi profiles

20-02-2014 Update v2.7.1
F2FS filesystem implementation ( /system /data /cache /preload automounted as ext4 or f2fs) | Using modified pegasusq from Perseus | cfg80211: Fix memory leak | added flexrate interface support for supporting governors | Revert "mmc: disable crc for better performance" to ensure data safety | added YankasusQ governor (Based on PegasusQ) | fixed non-boot issue after AGNi preloadSWAP turned on | AGNi ANYROM installer updated to v4.3 (now uses awk too) | added sysrw & sysro | new compiled busybox v1.23 with expanded features (1.7MB sized at /sbin) | fix non boot on omni with f2fs | disabled background_gc for f2fs mounts | increased swap priority for preloadSWAP feature (now all 4 zrams + preload swap will have same priority) | Migrate to Stock WiFi driver | implemented async fsync | some modifications to dynamic fsync | ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations | backport: smp: patches from mainline 3.5 to hopefully help with hotpluging | backport SLUB from Linux 3.3 (thanks to faux123) | disabled ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUE S

08-03-2014 Update v2.7.3
Disable Dynamic Fsync (seems to cause issues with Async Fsync) | Bring back original stock pegasusq (pegasusqplus is actually a renamed pegasusq from perseus) | fix auto-installation of AGNi Control app | fixed zram0 not turning off when turning off Zrams by AGNi Control | switch to GCC 4.8.3 linaro cortex-a9 optimised toolchain
- added AGNi PhoneKill app (Experimental: it kills com.android.phone and doesnt have any UI)
The network bars will be zero then will come back immediately as the killed process is auto started
This is to test weather the post-call battery drain of ~2%/hour can be stopped by manually restarting the com.android.phone process instead of rebooting the device.
You can safely uninstall it if not needed, unlike AGNi Control, it wont be autoinstalled on every boot.

 

[Cpt. Future]

Thread aktualisiert!

Gruss

 

[Marcel2580]

Hat irgendwer Erfahrung mit den Kernel und kann mal was berichten?

 

[Cpt. Future]

Wenn Du eine CM Rom hast, solltest du es mal ausprobieren. Ich habe es genutzt und war zufrieden. Ich weiß nicht, ob dir das nun viel nutzt.

Gruss

 

[Marcel2580]

Ich benutze die jelly bam. Mit der müsste der Kernel doch funktionieren, oder? Weißt du zufällig noch wie sich der Akku bei dem Kernel geschlagen hat und wieso bist du weg von ihm wenn du zufrieden warst?

 

[Cpt. Future]

Ja die Jellybam ist eine CM Rom damit geht es. Ganz ehrlich, weil ich sehr viel teste und testen muss. Aktuell nutze auch die Hyperdroid Rom und da ist ab Werk die RedPill dabei und habe es dabei belassen.

Gruss

 

[Marcel2580]

Okay, dann werde ich den auch mal probieren. Vielen dank dir nochmal.

 

[Marcel2580]

Bei dem Kernel funktioniert bei mir kein WLAN, habe die oc Version ohne Auto oc installiert. Jetzt schon das dritte mal geflasht mit kleinem wipe und immer das selbe Ergebnis, kein WLAN. Sonst läuft er sehr gut.

 

[Cpt. Future]

Hmmm, sorry keine Ahnung warum das bei Dir nicht funktioniert. Ich hatte keinerlei probleme mit :-(


Gruss

 

[Marcel2580]

welche Version hattest du denn installiert?

 

[Cpt. Future]

Moin moin Marcel, ich hatte diese Version ohne jegliche WLan probleme geflasht!


PSN_pureCM-v2.1_N7100_OC-signed.zip -

Gruss

 

[Marcel2580]

Vielen dank, aber dein Link führt leider nur ins Nirvana von xda.

 

[Cpt. Future]

Zweiter Versuch!

PSN_pureCM-v2.1_N7100_OC-signed.zip -

Gruss

 

[Marcel2580]

Perfekt. Dies mal hat es Super funktioniert. Muss nur noch das WLAN funktionieren. Leider habe ich gerade den Devil drauf und der läuft echt wie Hölle und ist auch vom Akku Verbrauch super.

 

[Cpt. Future]

Never change a running System. Meine Empfehlung, bleibe auf der Devil!

Gruss

 

[Marcel2580]

Ja werde ich jetzt auch erst mal machen. Zumindest solange ich beim Devil keinen Fehler entdecke.

 

[Mayday]

Hatte den Kernel gestern mal installiert, aber mit dem verbraucht mein N2 im DS deutlich mehr, als mit dem Stock Carbon Kernel, welcher auch auf dem CM basiert.

Zwar schaltet der AGNi sofort Kernel ab, das macht der Carbon Kernel nicht so schnell, aber dadurch verbessert sich der Verbrauch nicht spürbar.

 

[andreas01]

Update

Changelog:
v2.2
09-06-2013: Updated kernel with all latest CM commits including S4 (I9505) wifi driver and latest ramdisk



LG
Andreas

 

[Cpt. Future]

Erste Seite up 2 date!
Nicht vergessen, diese Version ist nur für CM 4.2.2 ROMS!!!

Gruss