2WF
Ikone
- 16.287
Erster Custom stock JB Kernel aus den sourcen von HTC um sweep to wake erweitert.
Gibt es hier
Kernel 27.02.13 Jelly Bean sweep2wake Kernel | HTC One X > XDA
Hab den unter OrDroid laufen, bin voll zufrieden.
Und hier gibt es eine neue Version von Alex-V Alex-V_S.E_0.6_fixed_incom_call/touchscr /Viper-UMS /cpuquiet/BLN
Habe ihn unter OrDroid 14.0.0 am laufen, mal sehen wie der sich so macht.
[08.04.13] [Kernel] | HTC One X > XDA
CHANGELOG
Changelog 2.7 Classic PA 2
-original hotplug (still faster in ui)
-no auto bln (had a 8h wakelock from buttons blink
-so its bad for battery)
-still buttons backlight brighness control
-smartmax and row as default (to compensate battery from original hotplug)
-wakes fast
-disabled 3D Scaling as default (can be enabled if wanted)
-fastcharge again
-3 versions
=old s2w
=old s2w with led buttons go on on slide (buggy)
=new s2w with dt2w
-repacked with sebby´s edited ramdisk (optimations and htc pnp manager compatible)
-enabled wifi powersave again (like original)
DL
Download Alex-V HTC Roms from SourceForge.net
Changelog 2.6 RC
-mpdecision hotplug (after your tests..it seems the best..thx to all)
-fixed light sensor (this fixes button backlight only go off on really sunny day..back to normal now)
-wifi: allow reconnect if already connected
-wifi: pre power up wifi =will fix sometimes not working wifi [if you still see its connected] i hope...my tests are good -interactive, smartmax, pmc from 2.4...it looks like these are the best atm
-still 3 versions: old s2w, new s2w with dt2w and without s2w -updated git with latest changes
Download: 2.6RC
Changelog 2.1
-fixed all cores online
-fixed max Cpu Freq on boot back to 1300mhz (will fix the to hot on Start-save boot)
-original Nvidia Hotplug -removed TDF Framework/Hotplug
-still based on trips ( so thx to him ) -OC
-Auto_BLN (led backlight notification)
-LED backlight brightness -(Viper)/UMS
-(for other rom it must be tested)
-original Fastcharge (must be enabled before)
-Control how many cores online
-old S2W
-new S2W with DT2W
-new govs =Smartmax =PMC =Touchdemand =Gaming
-new I/O Sheduler =Row =Sio =Cfq -original vibration
-maybe more -on my list:look to bt and wifi from original/mpdec/gpu interface/etc...etc
Download 2.1 Sense 5 Kernel
Find out more about Alex-V HTC Roms | SourceForge.net
Changelog 2.0
-based on trips latest only working sense 5 kernel source (thx @TripNRaVeR)
-first test release
-Sweep2Wake (S2W)
-pocket protection
-as kernel is based on his aosp source (which is the latest updated)
=fixed Sound and usb
-as default interacive (with 1.3 max at boot) no oc atm
-as default deadline with 128kb read ahead
-no repack for sense 5 needed
-till we have the htc source i will look on mhl (because of tegra4 driver)...maybe back to original wifi and vibration and also will look at hotplug
Download 2.0 Sense 5 Kernel
Download Alex-V HTC Roms from SourceForge.net
Changelog 1.7
-smartmax and pmc gov from xm304
=to get it work some cpu patches from 304
(found one bug in last minute - i can set 1.6ghz but max is @1.55ghz
please dont report this - i know it and will fix)
-3 versions:
=old s2w (now with pocket protection and calibration control) - should solve call problems
=new s2w (this version contains the touchscreen source from viper 11 kernel + calibraion control)
=new s2w + dt2w (also with calibration control)
=new but still compatible viper ramdisk (also for all other sense roms-no need to repack)
-new viper tweaks beta 3.7.9 with calibraion control toggle (thx richmondo)
=means you can now quick toggle it on or off if you have call problems
next version should be a rc 1 with working vpn
Download 1.7Kernel
Download Alex-V HTC Roms from SourceForge.net
Download Viper Tweaks 3.7.9 with calibraion control toggle
Download Alex-V HTC Roms from SourceForge.net
Download Viper Tweaks 3.7.9 with calibraion control toggle if you got fc with old s2w
Download Alex-V HTC Roms from SourceForge.net
Changelog 1.5 Test Kernel
-as requested auto-bln
-old s2w with all old values and calibration off (multitouch fix) =^ this should solve end call problem for someone...incoming needs testing
-lp core low voltage disabled (as i had a reboot while charging..since i got no problems)
Changelog 1.5
-OC and Voltage table from 0.8 again = (up to 1.6 ghz for variant 0+1 and 1.7 for 2+3)
-updated git
Download 1.5 Test Kernel
http://sourceforge.net/projects/alex...l.zip/download
Download 1.5 old and new s2w
http://sourceforge.net/projects/alex...5.zip/download
Changelog 1.3
-changed cpu table values (still 1.55 ghz but the way it will be used) -changed millivolts table (you want notice...but stabilty)
-again old and new s2w (the way you like it)
-added gaming gov (thx xmister) [see Epic Citadel Benchmark over 50) -added pmc (battery gov)
-still nvidia hotplug -very stable (at least for me 2 benchmark Epic Citadel and no reboot with gaming gov)
-perfect miixture between xmister / kozmickick /n3o / maxwen
Download 1.3 old and new s2w
http://sourceforge.net/projects/alex...3.zip/download
CHANGELOG
Change 0.8
-oc and voltage table from latest kozmik version (big thx again, you are great)
-touch input updates (thx maxwen)
-s2w update (thx maxwen)
- my source git to this
https://github.com/Alex-V2/Alex-V_SE_OneX/tree/play2
Alex-V_S.E_0.7_fixed_incom_call/touchscr /Viper-UMS/cpuquiet/DT2W
DL V_se.0.8 Download Alex-V HTC Roms from SourceForge.net
Neuer Kernel ist up
CHANGELOG
-removed auto-bln (its not stable enough for me)
-added complete ums (must be tested as i´m on viper
-added 85°C throttle back
-added the new s2w (no viper tweaks error-2-3 buttons) thx maxwen -added Double tap 2 wake (DT2W) thx maxwen
Download 0.7: Download Alex-V HTC Roms from SourceForge.net
Gibt es hier
Kernel 27.02.13 Jelly Bean sweep2wake Kernel | HTC One X > XDA
Hab den unter OrDroid laufen, bin voll zufrieden.
Und hier gibt es eine neue Version von Alex-V Alex-V_S.E_0.6_fixed_incom_call/touchscr /Viper-UMS /cpuquiet/BLN
Habe ihn unter OrDroid 14.0.0 am laufen, mal sehen wie der sich so macht.
[08.04.13] [Kernel] | HTC One X > XDA
CHANGELOG
Changelog 2.7 Classic PA 2
-original hotplug (still faster in ui)
-no auto bln (had a 8h wakelock from buttons blink
-so its bad for battery)
-still buttons backlight brighness control
-smartmax and row as default (to compensate battery from original hotplug)
-wakes fast
-disabled 3D Scaling as default (can be enabled if wanted)
-fastcharge again
-3 versions
=old s2w
=old s2w with led buttons go on on slide (buggy)
=new s2w with dt2w
-repacked with sebby´s edited ramdisk (optimations and htc pnp manager compatible)
-enabled wifi powersave again (like original)
DL
Download Alex-V HTC Roms from SourceForge.net
Changelog 2.6 RC
-mpdecision hotplug (after your tests..it seems the best..thx to all)
-fixed light sensor (this fixes button backlight only go off on really sunny day..back to normal now)
-wifi: allow reconnect if already connected
-wifi: pre power up wifi =will fix sometimes not working wifi [if you still see its connected] i hope...my tests are good -interactive, smartmax, pmc from 2.4...it looks like these are the best atm
-still 3 versions: old s2w, new s2w with dt2w and without s2w -updated git with latest changes
Download: 2.6RC
Changelog 2.1
-fixed all cores online
-fixed max Cpu Freq on boot back to 1300mhz (will fix the to hot on Start-save boot)
-original Nvidia Hotplug -removed TDF Framework/Hotplug
-still based on trips ( so thx to him ) -OC
-Auto_BLN (led backlight notification)
-LED backlight brightness -(Viper)/UMS
-(for other rom it must be tested)
-original Fastcharge (must be enabled before)
-Control how many cores online
-old S2W
-new S2W with DT2W
-new govs =Smartmax =PMC =Touchdemand =Gaming
-new I/O Sheduler =Row =Sio =Cfq -original vibration
-maybe more -on my list:look to bt and wifi from original/mpdec/gpu interface/etc...etc
Download 2.1 Sense 5 Kernel
Find out more about Alex-V HTC Roms | SourceForge.net
Changelog 2.0
-based on trips latest only working sense 5 kernel source (thx @TripNRaVeR)
-first test release
-Sweep2Wake (S2W)
-pocket protection
-as kernel is based on his aosp source (which is the latest updated)
=fixed Sound and usb
-as default interacive (with 1.3 max at boot) no oc atm
-as default deadline with 128kb read ahead
-no repack for sense 5 needed
-till we have the htc source i will look on mhl (because of tegra4 driver)...maybe back to original wifi and vibration and also will look at hotplug
Download 2.0 Sense 5 Kernel
Download Alex-V HTC Roms from SourceForge.net
Changelog 1.7
-smartmax and pmc gov from xm304
=to get it work some cpu patches from 304
(found one bug in last minute - i can set 1.6ghz but max is @1.55ghz
please dont report this - i know it and will fix)
-3 versions:
=old s2w (now with pocket protection and calibration control) - should solve call problems
=new s2w (this version contains the touchscreen source from viper 11 kernel + calibraion control)
=new s2w + dt2w (also with calibration control)
=new but still compatible viper ramdisk (also for all other sense roms-no need to repack)
-new viper tweaks beta 3.7.9 with calibraion control toggle (thx richmondo)
=means you can now quick toggle it on or off if you have call problems
next version should be a rc 1 with working vpn
Download 1.7Kernel
Download Alex-V HTC Roms from SourceForge.net
Download Viper Tweaks 3.7.9 with calibraion control toggle
Download Alex-V HTC Roms from SourceForge.net
Download Viper Tweaks 3.7.9 with calibraion control toggle if you got fc with old s2w
Download Alex-V HTC Roms from SourceForge.net
Changelog 1.5 Test Kernel
-as requested auto-bln
-old s2w with all old values and calibration off (multitouch fix) =^ this should solve end call problem for someone...incoming needs testing
-lp core low voltage disabled (as i had a reboot while charging..since i got no problems)
Changelog 1.5
-OC and Voltage table from 0.8 again = (up to 1.6 ghz for variant 0+1 and 1.7 for 2+3)
-updated git
Download 1.5 Test Kernel
http://sourceforge.net/projects/alex...l.zip/download
Download 1.5 old and new s2w
http://sourceforge.net/projects/alex...5.zip/download
Changelog 1.3
-changed cpu table values (still 1.55 ghz but the way it will be used) -changed millivolts table (you want notice...but stabilty)
-again old and new s2w (the way you like it)
-added gaming gov (thx xmister) [see Epic Citadel Benchmark over 50) -added pmc (battery gov)
-still nvidia hotplug -very stable (at least for me 2 benchmark Epic Citadel and no reboot with gaming gov)
-perfect miixture between xmister / kozmickick /n3o / maxwen
Download 1.3 old and new s2w
http://sourceforge.net/projects/alex...3.zip/download
CHANGELOG
Change 0.8
-oc and voltage table from latest kozmik version (big thx again, you are great)
-touch input updates (thx maxwen)
-s2w update (thx maxwen)
- my source git to this
https://github.com/Alex-V2/Alex-V_SE_OneX/tree/play2
Alex-V_S.E_0.7_fixed_incom_call/touchscr /Viper-UMS/cpuquiet/DT2W
DL V_se.0.8 Download Alex-V HTC Roms from SourceForge.net
Neuer Kernel ist up
CHANGELOG
-removed auto-bln (its not stable enough for me)
-added complete ums (must be tested as i´m on viper
-added 85°C throttle back
-added the new s2w (no viper tweaks error-2-3 buttons) thx maxwen -added Double tap 2 wake (DT2W) thx maxwen
Download 0.7: Download Alex-V HTC Roms from SourceForge.net
Zuletzt bearbeitet: