LG G3 rooten unter Linux?

  • 0 Antworten
  • Letztes Antwortdatum
L

linuxnutzer

Enthusiast
177
Hat sich schon mal wer die Mühe gemacht und das LG Root Script v1.2 auf Linux umzulegen.

iMHO gibt es da vor allem 2 Dateien, die zu überlegen sind:

Edit: Muss die Spoiler durch code ersetzen, sind zuviele Smileys dabei.

Code: 
@echo off
echo ---------------------------------
echo LG Root - One click script
echo Written by avicohh
echo ---------------------------------
echo.
echo Please make sure that USB debugging is enabled, and LG drivers are installed.
echo.
echo Starting adb server..
adb.exe kill-server > nul
adb.exe start-server > nul
echo.
echo Waiting for device..
adb.exe wait-for-device
echo.
echo Device detected!
echo.
echo Pushing files..
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp/ && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp/
echo.
echo Rebooting..
adb reboot
echo.

echo Looking for LG serial port..
echo.
adb.exe wait-for-device
for /f "tokens=2*" %%a in ('reg query HKLM\hardware\devicemap\SERIALCOMM /v \Device\LG*ANDNETDIAG* 2^>nul ^| find "REG_SZ" 2^>nul') do set "comPath=%%~b"
if "%comPath%" == "" (
echo Serial port not found, please insert the phone manually into Download mode.
echo.
echo Disconnect the USB cable and turn off the phone.
echo Then press and hold the Volume Up button, and while you're doing that connect the USB cable again.
echo.
echo Waiting for device..
echo.
) else (
echo Phone found at %comPath%!
echo.
echo Rebooting into Download mode..
echo.
Send_Command.exe \\.\%comPath% < enterDownload | echo off
echo Waiting for device..
echo.
ping 127.0.0.1 -n 15 | echo off
)

set comPath=
:wait-for-download
for /f "tokens=2*" %%a in ('reg query HKLM\hardware\devicemap\SERIALCOMM /v \Device\LG*ANDNETDIAG* 2^>nul ^| find "REG_SZ" 2^>nul') do set "comPath=%%~b"
if "%comPath%" == "" goto wait-for-download
echo Phone found at %comPath%!
echo.
echo Rooting phone..
echo.
echo If you don't see the SuperSu installer script runs within about a minute,
echo then the root failed.
echo.
ping 127.0.0.1 -n 15 | echo off
Send_Command.exe \\.\%comPath% < installRoot
echo.
echo Rebooting..
Send_Command.exe \\.\%comPath% < leaveDownload | echo off
echo.
echo Done!
pause > nul | echo Press any key to exit..

und

Code: 
#!/sbin/sh
OUTFD=$2
ZIP=$3
BUSYBOX=$4
chmod 755 $BUSYBOX
mkdir /tmp


SYSTEMLIB=/system/lib

ui_print() {
  echo -n -e "ui_print $1\n" > /proc/self/fd/$OUTFD
}

ch_con() {
  LD_LIBRARY_PATH=$SYSTEMLIB /system/toolbox chcon -h u:object_r:system_file:s0 $1
  LD_LIBRARY_PATH=$SYSTEMLIB /system/bin/toolbox chcon -h u:object_r:system_file:s0 $1
  chcon -h u:object_r:system_file:s0 $1
  LD_LIBRARY_PATH=$SYSTEMLIB /system/toolbox chcon u:object_r:system_file:s0 $1
  LD_LIBRARY_PATH=$SYSTEMLIB /system/bin/toolbox chcon u:object_r:system_file:s0 $1
  chcon u:object_r:system_file:s0 $1
}

ch_con_ext() {
  LD_LIBRARY_PATH=$SYSTEMLIB /system/toolbox chcon $2 $1
  LD_LIBRARY_PATH=$SYSTEMLIB /system/bin/toolbox chcon $2 $1
  chcon $2 $1
}

ln_con() {
  LD_LIBRARY_PATH=$SYSTEMLIB /system/toolbox ln -s $1 $2
  LD_LIBRARY_PATH=$SYSTEMLIB /system/bin/toolbox ln -s $1 $2
  ln -s $1 $2
  ch_con $2
}

set_perm() {
  chown $1.$2 $4
  chown $1:$2 $4
  chmod $3 $4
  ch_con $4
  ch_con_ext $4 $5
}

cp_perm() {
  rm $5
  if [ -f "$4" ]; then
  cat $4 > $5
  set_perm $1 $2 $3 $5 $6
  fi
}

ui_print "*****************"
ui_print "SuperSU installer"
ui_print "*****************"

ui_print "- Mounting /system, /data and rootfs"
mount /system
mount /data
mount -o rw,remount /system
mount -o rw,remount /system /system
mount -o rw,remount /
mount -o rw,remount / /

cat /system/bin/toolbox > /system/toolbox
chmod 0755 /system/toolbox
ch_con /system/toolbox

API=$(cat /system/build.prop | grep "ro.build.version.sdk=" | dd bs=1 skip=21 count=2)
ABI=$(cat /system/build.prop /default.prop | grep -m 1 "ro.product.cpu.abi=" | dd bs=1 skip=19 count=3)
ABILONG=$(cat /system/build.prop /default.prop | grep -m 1 "ro.product.cpu.abi=" | dd bs=1 skip=19)
ABI2=$(cat /system/build.prop /default.prop | grep -m 1 "ro.product.cpu.abi2=" | dd bs=1 skip=20 count=3)
SUMOD=06755
SUGOTE=false
SUPOLICY=false
INSTALL_RECOVERY_CONTEXT=u:object_r:system_file:s0
MKSH=/system/bin/mksh
PIE=
ARCH=arm
APKFOLDER=false
APKNAME=/system/app/Superuser.apk
APPPROCESS=false
APPPROCESS64=false
if [ "$ABI" = "x86" ]; then ARCH=x86; fi;
if [ "$ABI2" = "x86" ]; then ARCH=x86; fi;
if [ "$API" -eq "$API" ]; then
  if [ "$API" -ge "17" ]; then
  SUGOTE=true
  PIE=.pie
  if [ "$ABILONG" = "armeabi-v7a" ]; then ARCH=armv7; fi;
  if [ "$ABI" = "mip" ]; then ARCH=mips; fi;
  if [ "$ABILONG" = "mips" ]; then ARCH=mips; fi;
  fi
  if [ "$API" -ge "18" ]; then
  SUMOD=0755
  fi
  if [ "$API" -ge "20" ]; then
  if [ "$ABILONG" = "arm64-v8a" ]; then ARCH=arm64; SYSTEMLIB=/system/lib64; APPPROCESS64=true; fi;
  if [ "$ABILONG" = "mips64" ]; then ARCH=mips64; SYSTEMLIB=/system/lib64; APPPROCESS64=true; fi;
  if [ "$ABILONG" = "x86_64" ]; then ARCH=x64; SYSTEMLIB=/system/lib64; APPPROCESS64=true; fi;
  APKFOLDER=true
  APKNAME=/system/app/SuperSU/SuperSU.apk
  fi
  if [ "$API" -ge "19" ]; then
  SUPOLICY=true
  if [ "$(LD_LIBRARY_PATH=$SYSTEMLIB /system/toolbox ls -lZ /system/bin/toolbox | grep toolbox_exec > /dev/null; echo $?)" -eq "0" ]; then
  INSTALL_RECOVERY_CONTEXT=u:object_r:toolbox_exec:s0
  fi
  fi
  if [ "$API" -ge "21" ]; then
  APPPROCESS=true
  fi
fi
if [ ! -f $MKSH ]; then
  MKSH=/system/bin/sh
fi

#ui_print "DBG [$API] [$ABI] [$ABI2] [$ABILONG] [$ARCH] [$MKSH]"

ui_print "- Extracting files"
cd /tmp
mkdir supersu
cd supersu

if [ -z "$BIN" ]; then
  $BUSYBOX unzip -o "$ZIP"

  BIN=/tmp/supersu/$ARCH
  COM=/tmp/supersu/common
fi

ui_print "- Disabling OTA survival"
chmod 0755 $BIN/chattr$PIE
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/bin/su
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/xbin/su
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/bin/.ext/.su
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/xbin/daemonsu
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/xbin/sugote
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/xbin/sugote_mksh
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/xbin/supolicy
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/lib/libsupol.so
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/lib64/libsupol.so
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/etc/install-recovery.sh
LD_LIBRARY_PATH=$SYSTEMLIB $BIN/chattr$PIE -i /system/bin/install-recovery.sh

ui_print "- Removing old files"

if [ -f "/system/bin/install-recovery.sh" ]; then
  if [ ! -f "/system/bin/install-recovery_original.sh" ]; then
  mv /system/bin/install-recovery.sh /system/bin/install-recovery_original.sh
  ch_con /system/bin/install-recovery_original.sh
  fi
fi
if [ -f "/system/etc/install-recovery.sh" ]; then
  if [ ! -f "/system/etc/install-recovery_original.sh" ]; then
  mv /system/etc/install-recovery.sh /system/etc/install-recovery_original.sh
  ch_con /system/etc/install-recovery_original.sh
  fi
fi

rm -f /system/bin/su
rm -f /system/xbin/su
rm -f /system/xbin/daemonsu
rm -f /system/xbin/sugote
rm -f /system/xbin/sugote-mksh
rm -f /system/xbin/supolicy
rm -f /system/lib/libsupol.so
rm -f /system/lib64/libsupol.so
rm -f /system/bin/.ext/.su
rm -f /system/bin/install-recovery.sh
rm -f /system/etc/install-recovery.sh
rm -f /system/etc/init.d/99SuperSUDaemon
rm -f /system/etc/.installed_su_daemon

rm -f /system/app/Superuser.apk
rm -f /system/app/Superuser.odex
rm -rf /system/app/Superuser
rm -f /system/app/SuperUser.apk
rm -f /system/app/SuperUser.odex
rm -rf /system/app/SuperUser
rm -f /system/app/superuser.apk
rm -f /system/app/superuser.odex
rm -rf /system/app/superuser
rm -f /system/app/Supersu.apk
rm -f /system/app/Supersu.odex
rm -rf /system/app/Supersu
rm -f /system/app/SuperSU.apk
rm -f /system/app/SuperSU.odex
rm -rf /system/app/SuperSU
rm -f /system/app/supersu.apk
rm -f /system/app/supersu.odex
rm -rf /system/app/supersu
rm -f /system/app/VenomSuperUser.apk
rm -f /system/app/VenomSuperUser.odex
rm -rf /system/app/VenomSuperUser
rm -f /data/dalvik-cache/*com.noshufou.android.su*
rm -f /data/dalvik-cache/*/*com.noshufou.android.su*
rm -f /data/dalvik-cache/*com.koushikdutta.superuser*
rm -f /data/dalvik-cache/*/*com.koushikdutta.superuser*
rm -f /data/dalvik-cache/*com.mgyun.shua.su*
rm -f /data/dalvik-cache/*/*com.mgyun.shua.su*
rm -f /data/dalvik-cache/*com.m0narx.su*
rm -f /data/dalvik-cache/*/*com.m0narx.su*
rm -f /data/dalvik-cache/*Superuser.apk*
rm -f /data/dalvik-cache/*/*Superuser.apk*
rm -f /data/dalvik-cache/*SuperUser.apk*
rm -f /data/dalvik-cache/*/*SuperUser.apk*
rm -f /data/dalvik-cache/*superuser.apk*
rm -f /data/dalvik-cache/*/*superuser.apk*
rm -f /data/dalvik-cache/*VenomSuperUser.apk*
rm -f /data/dalvik-cache/*/*VenomSuperUser.apk*
rm -f /data/dalvik-cache/*eu.chainfire.supersu*
rm -f /data/dalvik-cache/*/*eu.chainfire.supersu*
rm -f /data/dalvik-cache/*Supersu.apk*
rm -f /data/dalvik-cache/*/*Supersu.apk*
rm -f /data/dalvik-cache/*SuperSU.apk*
rm -f /data/dalvik-cache/*/*SuperSU.apk*
rm -f /data/dalvik-cache/*supersu.apk*
rm -f /data/dalvik-cache/*/*supersu.apk*
rm -f /data/dalvik-cache/*.oat
rm -f /data/app/com.noshufou.android.su*
rm -f /data/app/com.koushikdutta.superuser*
rm -f /data/app/com.mgyun.shua.su*
rm -f /data/app/com.m0narx.su*
rm -f /data/app/eu.chainfire.supersu-*
rm -f /data/app/eu.chainfire.supersu.apk

ui_print "- Placing files"

mkdir /system/bin/.ext
set_perm 0 0 0777 /system/bin/.ext
cp_perm 0 0 $SUMOD $BIN/su /system/bin/.ext/.su
cp_perm 0 0 $SUMOD $BIN/su /system/xbin/su
cp_perm 0 0 0755 $BIN/su /system/xbin/daemonsu
if ($SUGOTE); then
  cp_perm 0 0 0755 $BIN/su /system/xbin/sugote u:object_r:zygote_exec:s0
  cp_perm 0 0 0755 $MKSH /system/xbin/sugote-mksh
fi
if ($SUPOLICY); then
  cp_perm 0 0 0755 $BIN/supolicy /system/xbin/supolicy
  cp_perm 0 0 0644 $BIN/libsupol.so $SYSTEMLIB/libsupol.so
fi
if ($APKFOLDER); then
  mkdir /system/app/SuperSU
  set_perm 0 0 0755 /system/app/SuperSU
fi
cp_perm 0 0 0644 $COM/Superuser.apk $APKNAME
cp_perm 0 0 0755 $COM/install-recovery.sh /system/etc/install-recovery.sh
ln_con /system/etc/install-recovery.sh /system/bin/install-recovery.sh
if ($APPPROCESS); then
  rm /system/bin/app_process
  ln_con /system/xbin/daemonsu /system/bin/app_process
  if ($APPPROCESS64); then
  if [ ! -f "/system/bin/app_process64_original" ]; then
  mv /system/bin/app_process64 /system/bin/app_process64_original
  else
  rm /system/bin/app_process64
  fi
  ln_con /system/xbin/daemonsu /system/bin/app_process64
  if [ ! -f "/system/bin/app_process_init" ]; then
  cp_perm 0 2000 0755 /system/bin/app_process64_original /system/bin/app_process_init
  fi
  else
  if [ ! -f "/system/bin/app_process32_original" ]; then
  mv /system/bin/app_process32 /system/bin/app_process32_original
  else
  rm /system/bin/app_process32
  fi
  ln_con /system/xbin/daemonsu /system/bin/app_process32
  if [ ! -f "/system/bin/app_process_init" ]; then
  cp_perm 0 2000 0755 /system/bin/app_process32_original /system/bin/app_process_init
  fi
  fi
fi
cp_perm 0 0 0744 $COM/99SuperSUDaemon /system/etc/init.d/99SuperSUDaemon
echo 1 > /system/etc/.installed_su_daemon
set_perm 0 0 0644 /system/etc/.installed_su_daemon

ui_print "- Post-installation script"
rm /system/toolbox
LD_LIBRARY_PATH=$SYSTEMLIB /system/xbin/su --install

ui_print "- Unmounting /system and /data"
umount /system
umount /data
rm -rf /tmp

ui_print "- Done !"

echo
echo Please press Ctrl+C, and then type N and ENTER to reboot.
echo
exit 0

Da wird ja nur kopiert:

Code: 
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
LEAVE

Man sollte daraus ein reines Linux-Shellscript zum Rooten machen können.[/code]

Edit
Fand gerade: [ROOT] Root your LG-G3 easily with PurpleDra… | LG G3 | XDA Forums und dort wurde LG G3 Compatibility Matrix - Google Tabellen erwähnt. Rooten hängrt also davon ab, welches 3G-Modell man hat und [PSA] NO OTAs!! | Keep Root/Unlock | How-To:… | LG G3 | XDA Forums muss man auch noch berücksichtigen.

Es gibt also auf [ROOT] Root your LG-G3 easily with PurpleDra… | LG G3 | XDA Forums zur Zeit einen Download für Linux:
Directory list
 
Zuletzt bearbeitet:
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

P
[How-To & Skript] Root, Custom-Recovery, Unlock & Bump: LG G3 Toolkit
  • Phiber2000
64 65 66
Antworten
1.300
Aufrufe
217.722
Fabian00086
Fabian00086
P
[How-To & Recover] Flashen von KDZs unter Android 6: LGUP
  • Phiber2000
2
Antworten
20
Aufrufe
24.332
BaZZtian
BaZZtian
razer1993
[How-To] LG G3 Leitfaden für Neulinge (ROOT,EFS,BUMP,TWRP,V10x - V30x))
  • razer1993
2 3
Antworten
41
Aufrufe
37.625
Phiber2000
P
Zurück
Oben Unten