[ROM] Novo7 Aurora - Android 4.0.3 - official - 19.01.2012

[gromicx]

Ich hab mal bei der Konkurenz geräubert und die Files bei anderen Hostern hochgeladen. Falls ich etwas falsch verlinkt habe oder bei anderen Fehlern, bitte melden!


Ich habe die Files und die Tutorials nur kopiert und noch nicht getestet, da ich noch auf mein Aurora warte.
Benutzung auf eigene Gefahr!

1. Install drivers for Windows

When installing select "other device"​

2. Install LiveSuit

Haven't used this package before, but it should be a pretty basic install.​

3. Download and use the latest image file in LiveSuit.

- Run LiveSuit
- Select to Format
- When requested point to the uncompressed image file​

4. Initiate the restore process:

- power off the Aurora
- press and hold the "back" button
- connect the usb cable to the Aurora
- while still holding the "back" button press "power" button rapidly, 5 times
- wait for the driver to be detected, the first time you do this it will install the drivers and can take some time
- LiveSuit will pop up and ask questions, hit "yes" to both​

This uses the latest image I could find, 2012-01-19. Found it on a Chinese forum. Hope it helps you.

Martin

Quelle: SlateDroid User: Dr Martin

Download Android 4.0.3 for Novo7 Aurora - official - 19.01.2012:
Rapidshare

Download LiveSuit v1.07:
Rapidshare

Mediafire

Download USB-Driver for Novo7 Aurora:
Rapidshare

Mediafire

Installation:

1. Check the current baseband/firmware installed. Go to Menu > Settings > About Device.

Turn-On Tablet, go to Settings > Applications > Development. = For Gingerbread​

Turn-On Tablet, go to System Settings > Developers Option. = For Ice Cream Sandwich​

Turn-ON USB Debugging & Stay Awake.​

2. Connect the Tablet to PC and double-click "dpinst.exe" to install the required USB Driver for your OS.

3. After installation, disconnect your Tablet to PC and Turn it OFF.

4. Extract the Livesuit Pack into a folder on your PC. Place the Firmware .img file inside the Livesuit Pack folder and double-click Livesuit.exe:

1st pop-up window click YES.
2nd pop-up window click FORMAT.
3rd pop-up window click NEXT.
4th pop-up window click YES.
5th pop-up window locate your selected FW image file and click OPEN.
6th pop-up window click FINISH.​

5. On your Tablet, press and hold the Back Button and connect the Tablet to PC.

6. As soon as you connect the USB Cable to PC, rapidly press the Power button 5 times without releasing the Back button.

7th pop-up window click: (YES = Upgrade/Downgrade) (NO = Re-Flash to same Firmware)
8th pop-up window click: (YES = Upgrade/Downgrade)​

7. You can now release the Menu button and wait for the upgrading to get finished.

9th pop-up window click FINISH or OK.​

Gingerbread 2.3.4 After Finishing Firmware Upgrading:

1. Disconnect the tablet to PC and Power-ON your Tablet.
2. Go to Settings scroll down upto bottom and locate the [A] icon to change the Language.
3. Touch the very 1st option and choose English (US).
4. Go to Settings > Wireless and Networks > Wi-Fi Settings and Press Menu.
5. Click Advanced > Wi-Fi Sleep Policy and set it to NEVER.
6. Go to Settings > Applications > Development and turn-ON Stay Awake.
7. Go to Settings > Display > Screen Timeout and set it to 2mins above.
8. Go To Settings > Sound and disable Haptic Feedback (Vibrate).
9. Reboot your Tablet.​

IceCreamSandwich 4.0.3 After Finishing Firmware Upgrading:

1. Disconnect the tablet to PC and Power-ON your Tablet.
2. Go to System Settings scroll down upto bottom and locate the [A] icon to change the Language.
3. Touch the very 1st option and choose English (US).
4. Go to System Settings > Developers Option > Turn-ON USB Debugging & Stay Awake.
5. Go to System Settings > Display >Sleep and set it to 2mins above.
6. Go To Settings > Sound and set Vibrate to Never and Disable Vibrate on Touch.
7. Reboot your Tablet.​

IF Firmware Upgrading Fails, just press Power button + RECV button (using plastic stick on tiny hole) for 10seconds and do the Firmware Upgrading
again.